User Manual

Introduction

Thank you for purchasing the Kedok M506 Multifunctional Turntable. This versatile audio system combines vintage aesthetics with modern functionality, allowing you to enjoy music from various sources including vinyl records, CDs, cassette tapes, FM radio, and Bluetooth-enabled devices. It also features direct recording of vinyl, CD, or cassette to MP3 format via USB or SD card. Please read this manual thoroughly before operating the unit to ensure proper use and to maximize your listening experience.

Figure 1: Kedok M506 Multifunctional Turntable

Safety Information

To ensure safe operation and prevent damage, please observe the following precautions:

• Do not expose the unit to rain, moisture, or direct sunlight.
• Do not block ventilation openings. Ensure adequate space around the unit for proper airflow.
• Avoid placing the unit near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Use only attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel.

Package Contents

Verify that all items are present in the package:

• Kedok M506 Multifunctional Turntable Unit
• User Manual (this document)
• 45 RPM Adapter
• Power Adapter
• RCA Audio Cable
• Auxiliary Cable

Product Overview

Familiarize yourself with the various components and controls of your Kedok M506 Turntable.

Figure 2: Key Features and Components

Front Panel Controls:

• Power/Volume Knob: Turns the unit on/off and adjusts volume.
• Mode Switch Knob: Selects input source (Phono, CD, Cassette, FM, Bluetooth, AUX).
• FM Tuner Dial: For manual FM radio tuning.
• CD Tray: For inserting and ejecting CDs.
• Control Buttons: Play/Pause, Stop, Skip Forward/Backward, Program, Repeat, Eject (for CD).
• Record/Delete Button: Initiates and stops recording to USB/SD.
• USB/SD Button: Selects USB or SD card for recording/playback.
• Headphone Jack: For private listening.

Top Panel (Under Lid):

• Turntable Platter: Where records are placed.
• Tonearm: Holds the stylus for playing records.
• Speed Selector: Adjusts playback speed (33 1/3, 45, 78 RPM).
• 45 RPM Adapter: For playing 7-inch records with large center holes.

Side Panel:

• Cassette Slot: For inserting cassette tapes.
• USB Port: For USB flash drives.
• SD/MMC Card Slot: For SD or MMC memory cards.

Rear Panel:

• RCA Line Out Jacks (L/R): For connecting to external amplifiers or powered speakers.
• AUX Input Jack: For connecting external audio devices.
• FM Antenna: For radio reception.
• Power Input: For connecting the power adapter.

Setup

1. Unpacking: Carefully remove the unit and all accessories from the packaging. Retain the packaging for future transport or storage.
2. Placement: Place the turntable on a flat, stable surface away from direct sunlight, heat sources, and excessive dust or vibrations. Ensure adequate ventilation around the unit.
3. Power Connection: Connect the power adapter to the DC IN jack on the rear of the unit, then plug the adapter into a standard wall outlet.
4. External Speaker Connection (Optional): If connecting to external speakers, use the provided RCA audio cable to connect the RCA Line Out jacks on the rear of the turntable to the audio input jacks on your amplifier or powered speakers. Ensure correct Left (white) and Right (red) connections.


Figure 3: RCA Line Out Connection

Operating Instructions

Power On/Off and Volume Control:

Rotate the Power/Volume Knob clockwise to turn the unit on and increase the volume. Rotate counter-clockwise to decrease volume and turn the unit off.

Playing Vinyl Records:

1. Lift the dust cover.
2. Place a record on the turntable platter. If playing a 7-inch single, place the 45 RPM adapter on the center spindle.
3. Set the Speed Selector to the appropriate speed (33 1/3, 45, or 78 RPM) for your record.


Figure 4: Turntable Speed Selection

4. Rotate the Mode Switch Knob to 'Phono'.
5. Carefully lift the tonearm and move it over the record. The platter will begin to spin.
6. Gently lower the tonearm onto the desired track.
7. At the end of the record, the tonearm will automatically return to its rest.

Playing CDs:

1. Rotate the Mode Switch Knob to 'CD'.
2. Press the Eject button to open the CD tray.
3. Place a CD with the label side facing up into the tray.
4. Press the Eject button again to close the tray. The unit will read the CD.
5. Press the Play/Pause button to start playback.
6. Use the Skip Forward/Backward buttons to navigate tracks.
7. Press the Stop button to stop playback.

Playing Cassette Tapes:

1. Rotate the Mode Switch Knob to 'Tape'.
2. Insert a cassette tape into the cassette slot on the side of the unit. Push it in until it clicks into place.


Figure 5: Cassette Tape Insertion

3. Playback will begin automatically.
4. Use the control buttons on the front panel for Play, Stop, Fast Forward, and Rewind.
5. To eject the tape, press the Stop button firmly.

FM Radio Operation:

1. Rotate the Mode Switch Knob to 'FM'.
2. Extend the FM antenna on the rear of the unit for optimal reception.
3. Rotate the FM Tuner Dial to tune into your desired radio station.

Bluetooth Connectivity:

1. Rotate the Mode Switch Knob to 'Bluetooth'. The Bluetooth indicator will flash, indicating pairing mode.
2. On your Bluetooth-enabled device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
3. Select 'Kedok M506' (or similar name) from the list to pair.
4. Once paired, the indicator will stop flashing, and you can stream music wirelessly to the turntable.


Figure 6: Bluetooth Streaming

Vinyl/CD/Cassette to MP3 Recording:

This unit allows you to record audio from vinyl records, CDs, or cassette tapes directly to a USB flash drive or SD/MMC card in MP3 format.

1. Insert a USB flash drive into the USB port or an SD/MMC card into the corresponding slot.
2. Select the desired source (Phono, CD, or Tape) using the Mode Switch Knob.
3. Press the USB/SD Button to select your recording media (USB or SD).
4. Begin playback of your chosen audio source (record, CD, or cassette).
5. Press the Record button to start recording. The recording indicator will illuminate.
6. Press the Record button again to stop recording. The recorded file will be saved to your USB drive or SD card.


Figure 7: Direct MP3 Recording

AUX Input:

Connect an external audio device (e.g., MP3 player, smartphone) to the AUX IN jack on the rear of the unit using an auxiliary cable. Rotate the Mode Switch Knob to 'AUX' to play audio through the turntable's speakers.

Headphone Output:

Plug headphones into the Headphone Jack on the front panel for private listening. The built-in speakers will be muted automatically.

Maintenance

Proper care will ensure the longevity of your turntable:

• Cleaning the Unit: Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Cleaning the Stylus: Gently brush the stylus from back to front with a soft brush designed for stylus cleaning.
• Dust Cover: Keep the dust cover closed when not in use to protect the turntable from dust and debris.
• Stylus Replacement: The stylus (needle) is a consumable part and will wear out over time. Replace it when you notice a decrease in sound quality or skipping. Consult the manufacturer's website or authorized dealers for replacement styli.

Troubleshooting

If you encounter issues with your turntable, refer to the following common problems and solutions:

Specifications

• Brand: Kedok
• Model Name: M506
• Connectivity Technology: Bluetooth
• Maximum Rotational Speed: 78 RPM (Supports 33 1/3, 45, 78 RPM)
• Included Components: Record player
• Material: Wood
• Color: Brown
• Item Weight: 18.74 pounds
• Package Dimensions: 21.65 x 17.32 x 13.58 inches
• Special Features: 10-in-1 Multifunction (Turntable, CD, Cassette, FM Radio, Bluetooth, AUX, Headphone, USB/SD/MMC for encoding & decoding, Built-in Stereo Speakers, RCA Line Out)

Warranty and Support

The Kedok M506 Multifunctional Turntable comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or replacement parts, please contact Kedok customer service through the retailer where you purchased the product or visit the official Kedok website.