Teslong Wireless Endoscope User Manual

1. Introduction

Thank you for choosing the Teslong Wireless Endoscope. This 1080P HD WiFi Inspection Camera is designed to provide clear visual inspection in hard-to-reach areas. Featuring a 7mm borescope camera with a detachable semi-rigid cable and IP67 waterproof rating, it is ideal for various applications including automotive repair, industrial mechanical inspection, drain checking, and pipeline inspection. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

Figure 1.1: Teslong Wireless Endoscope with smartphone holder.

2. Safety Information

Please read all safety warnings and instructions before using this product to prevent electric shock, fire, or serious injury.

• Do not use the device in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Keep the camera probe and cable away from heat sources and sharp objects.
• Ensure the device is fully charged before use to avoid interruptions during inspection.
• The camera probe is IP67 waterproof, but the main unit (handle) is not. Do not submerge the main unit in water.
• Do not attempt to disassemble or modify the device. Repairs should only be performed by qualified personnel.
• Keep out of reach of children.

3. Package Contents

Verify that all items are present in your package:

• Teslong Wireless Endoscope Main Unit (WF200L5S7MM)
• Semi-rigid Inspection Cable with 7mm Camera Probe
• USB Type-C Charging Cable
• User Manual (this document)
• Accessories (Hook, Magnet, Mirror)

4. Product Overview

The Teslong Wireless Endoscope features an ergonomic design for comfortable single-handed operation. It includes a detachable semi-rigid cable for easy storage and interchangeability.

Figure 4.1: Ergonomic design of the Teslong WF200 Wireless Endoscope.

Key Components:

• Main Unit: Handheld device with power button, brightness adjustment dial, and phone holder.
• Camera Probe: 7mm diameter, 2.0 Megapixels HD CMOS sensor with 8 adjustable LED lights.
• Semi-rigid Cable: Flexible yet firm cable for navigating tight spaces.
• Built-in Flashlight: Provides additional illumination on the main unit.
• USB-C Port: For charging the internal battery.

Figure 4.2: The built-in LED flashlight on the main unit provides additional illumination.

5. Setup Guide

5.1 Charging the Device

Before first use, fully charge the endoscope. The built-in 2000mAh rechargeable battery provides up to 4 hours of continuous working time.

1. Connect the provided USB Type-C charging cable to the charging port on the main unit.
2. Connect the other end of the cable to a standard USB power adapter (not included) or a computer USB port.
3. The charging indicator light will show the charging status. Once fully charged, the light will change (refer to device indicators for specific behavior).

Figure 5.1: The endoscope features a 2000mAh high-capacity battery for extended use.

5.2 Installing the "Smart Endoscope" App

The Teslong Wireless Endoscope requires the "Smart Endoscope" app for operation. It is compatible with Android (7.0+) and iOS (10.0+) devices.

1. Scan the QR code provided in the quick start guide or search for "Smart Endoscope" on the App Store (for iOS) or Google Play Store (for Android).
2. Download and install the app on your smartphone or tablet.

Figure 5.2: Step-by-step guide for app installation and WiFi connection.

5.3 Connecting via Wi-Fi

Once the app is installed, connect your device to the endoscope's Wi-Fi network.

1. Power on the Teslong Wireless Endoscope by pressing and holding the power button on the main unit.
2. On your smartphone or tablet, go to Wi-Fi settings.
3. Locate and select the Wi-Fi network named "WF_Cam_******" (the asterisks will be replaced by a unique device ID).
4. Once connected, open the "Smart Endoscope" app. The camera feed should now be visible.

5.4 Attaching the Inspection Cable

The semi-rigid inspection cable is detachable for convenience and versatility.

1. Align the connector of the inspection cable with the port on the main unit.
2. Gently push and twist the connector clockwise until it clicks securely into place.
3. To detach, twist counter-clockwise and pull.

Figure 5.3: The detachable probe design allows for easy storage and future upgrades.

6. Operating Instructions

6.1 Powering On/Off

• Power On: Press and hold the power button on the main unit until the indicator light illuminates.
• Power Off: Press and hold the power button again until the indicator light turns off.

6.2 Adjusting LED Lights

The camera probe is equipped with 8 adjustable LED lights to illuminate dark inspection areas.

• Rotate the brightness adjustment dial on the main unit to increase or decrease the intensity of the LED lights. There are three adjustable brightness levels.

Figure 6.1: The camera probe features 8 high-brightness LEDs and is IP67 waterproof.

6.3 Capturing Images and Videos

Use the "Smart Endoscope" app to capture high-resolution images and videos.

• Taking Photos: In the app interface, tap the camera icon to capture a still image. Images are saved in JPEG format.
• Recording Videos: Tap the video camera icon to start recording. Tap it again to stop. Videos are saved in MP4 format.
• Captured media will be stored directly on your connected smartphone or tablet.

Figure 6.2: View the inspection feed on your iPhone, iPad, or Android smartphone/tablet.

6.4 Using Accessories (Hook, Magnet, Mirror)

The endoscope comes with useful accessories that can be attached to the camera probe for enhanced functionality.

• Hook: Useful for retrieving small objects from hard-to-reach places.
• Magnet: Ideal for picking up metallic items like screws or keys.
• Mirror: Provides a side view for inspecting areas that are not directly in front of the camera.

To attach an accessory, carefully slide it onto the tip of the camera probe until it is secure.

Figure 6.3: Included accessories: Hook, Magnet, and Mirror for versatile inspections.

7. Maintenance

7.1 Cleaning

• After each use, especially in dirty or wet environments, clean the camera probe and cable with a soft, damp cloth.
• For stubborn dirt, a mild detergent can be used, but ensure no liquid enters the main unit.
• Do not use abrasive cleaners or solvents.
• Ensure the camera lens is clean for clear images. Use a lens cleaning cloth if necessary.

7.2 Storage

• Store the endoscope in a cool, dry place, away from direct sunlight and extreme temperatures.
• Detach the inspection cable from the main unit for compact storage.
• Keep the device and accessories in their original packaging or a protective case to prevent damage.

8. Troubleshooting

9. Specifications

10. Warranty and Support

Teslong provides a 12-month warranty for this product, covering manufacturing defects from the date of purchase.

Warranty Exclusions:

• Damage caused by improper use, accident, abuse, neglect, or unauthorized modification.
• Normal wear and tear.
• Damage caused by natural disasters or acts of God.

Customer Support:

If you encounter any issues or have questions regarding your Teslong Wireless Endoscope, please contact our customer support team. Refer to the contact information provided on the Teslong official website or your purchase documentation.

For more information and product updates, visit the official Teslong store: Teslong Store on Amazon