1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Fosmon Rechargeable Battery Pack for Xbox Series X/S Controllers. This product is designed to offer a reliable and long-lasting power solution for your gaming controllers, eliminating the need for disposable batteries.
The 1000mAh capacity ensures extended playtime, and the included USB cables allow for convenient charging. This battery pack is specifically designed for 2020 Xbox Series X and Xbox Series S controllers. It is not compatible with Xbox One or Xbox 360 controllers.
Image: Compatibility with Xbox Series X and Series S controllers.
2. Package Contents
Please verify that all items are present in your package:
- 2 x Fosmon 1000mAh Rechargeable Battery Packs
- 2 x 10-foot (3 meter) Micro-USB Charging Cables
Image: Contents of the Fosmon Rechargeable Battery Pack package, showing two battery packs and two charging cables.
3. Setup
Follow these steps to install the rechargeable battery pack into your Xbox Series X/S controller:
- Locate the battery compartment on the back of your Xbox Series X/S controller.
- Open the battery compartment cover.
- Insert the Fosmon rechargeable battery pack into the compartment, ensuring the contacts align correctly with those in the controller. The battery pack is designed to fit snugly.
- Close the battery compartment cover securely.
For initial use, it is recommended to fully charge the battery pack before extensive gaming sessions.
4. Operating Instructions
4.1 Charging the Battery Pack
The battery pack can be charged while installed in the controller or separately. Use the provided 10-foot micro-USB cable for charging.
- Connect the micro-USB end of the cable to the port on the battery pack (or the controller if the battery is installed).
- Connect the USB-A end of the cable to a powered USB port (e.g., console, PC, USB wall adapter).
A full charge typically takes 4-5 hours, providing up to 30-33 hours of playtime.
Image: Rechargeable battery benefits, showing charging time and playtime.
4.2 LED Charging Indicator
The battery pack features an LED indicator to show its charging status:
- Red LED: Indicates the battery pack is currently charging.
- Green LED: Indicates the battery pack is fully charged.
Image: LED charging indicator status.
4.3 Play and Charge Functionality
You can continue to use your controller while the battery pack is charging. Simply connect the micro-USB cable to the battery pack (or controller) and a power source, and continue your gaming session without interruption.
Image: Play and Charge functionality with the 10-foot cable.
Image: Battery capacity and estimated playtime.
5. Maintenance
To ensure the longevity and optimal performance of your Fosmon Rechargeable Battery Pack, consider the following maintenance tips:
- Regular Charging: Avoid completely draining the battery pack before recharging. Regular charging helps maintain battery health.
- Storage: If storing the battery pack for an extended period, charge it to approximately 50% and store it in a cool, dry place. Avoid extreme temperatures.
- Cleaning: Use a dry, soft cloth to clean the battery pack and its contacts. Do not use liquid cleaners or abrasive materials.
- Cable Care: Handle the charging cables with care. Avoid sharp bends or excessive pulling that could damage the connectors or cable insulation.
6. Troubleshooting
If you encounter issues with your Fosmon Rechargeable Battery Pack, refer to the following common problems and solutions:
- Battery Pack Not Charging:
- Ensure the micro-USB cable is securely connected to both the battery pack/controller and the power source.
- Try a different USB port or power adapter.
- Verify that the LED indicator on the battery pack illuminates red when connected to power. If not, the cable or power source may be faulty.
- Short Battery Life:
- Ensure the battery pack is fully charged (green LED).
- Battery performance can degrade over time with extensive use.
- Environmental factors (e.g., extreme cold) can temporarily affect battery performance.
- Battery Pack Does Not Fit Controller:
- Confirm that your controller is an Xbox Series X or Xbox Series S model (2020 version). This battery pack is not compatible with Xbox One or Xbox 360 controllers.
- Ensure the battery pack is oriented correctly before attempting to insert it.
If these steps do not resolve the issue, please refer to the Warranty and Support section for further assistance.
7. Specifications
| Model | C-10772 |
| Battery Type | NiMH (Nickel-Metal Hydride) |
| Capacity | 1000mAh |
| Output Voltage | 2.4V |
| Charging Time | Approximately 4-5 hours |
| Playtime per Charge | Up to 30-33 hours |
| Package Dimensions | 6 x 4 x 2.5 inches |
| Item Weight | 8.5 ounces (total package) |
| Manufacturer | Fosmon |
8. Warranty and Support
This Fosmon Rechargeable Battery Pack comes with a Limited Lifetime Warranty. For detailed information regarding warranty terms, conditions, and to register your product, please visit the official Fosmon website.
For technical support or further inquiries, please contact Fosmon customer service through their official website or the contact information provided with your product packaging.
