1. Product Overview
This manual provides instructions for the HOROW Luxury Wall Mounted Bidet Toilet, Model HR-G10S. This smart toilet integrates a bidet seat with features such as instant warm water, an auto-open lid, a heated seat, and a dryer function, designed for modern bathrooms.
Image 1: HOROW Luxury Wall Mounted Bidet Toilet, Model HR-G10S.
2. Key Features
- Wall Hung Design: Space-saving and facilitates easier cleaning of the bathroom floor.
- Integrated Bidet Seat: Adjustable water temperature, water pressure, and nozzle position for personalized cleansing.
- Automatic Lid Operation: The toilet lid automatically opens upon approach and closes upon departure.
- Heated Seat: Provides immediate warmth upon sensing a user.
- Warm Air Dryer: Dries the skin with warm air after bidet use.
3. Package Contents
Verify that all components are present before beginning installation. The package typically includes:
- Wall-mounted toilet bowl with integrated smart bidet seat
- Remote control
- Mounting hardware (bolts, nuts, washers)
- Inlet and outlet pipes/flanges
- Gasket
- Push plate panel (for flush mechanism)
- Power supply cable
- Flush sensor wire
- Installation tools (not included, but required: ruler, pencil, wrench, saw, utility knife)
Image 2: Internal view of the smart toilet components, including the bidet nozzle and dryer mechanism.
4. Installation Guide
Professional installation is recommended. Ensure all local plumbing and electrical codes are followed. This guide provides a general overview of the installation process.
4.1 Pre-Installation Steps
- Confirm Components: Verify all parts are present as per the package contents.
- Gather Tools: Ensure you have necessary tools such as a ruler, pencil, wrench, saw, and utility knife.
- Prepare Wall Carrier: Ensure your in-wall tank and carrier system is correctly installed and secured.
- Mark Connections: Mark the positions for the flush sensor wire, water pipe, and power supply on the wall.
Image 3: Diagram showing recommended installation positions for water pipe, flush sensor wire, and power supply.
4.2 Pipe Preparation
- Cut Excess Pipe: Cut off any excess length from the flush sensor wire and insert the adapter.
- Measure and Cut Inlet/Outlet Pipes: Use a ruler to determine the required length for the inlet and outlet pipes. Place the flange and inlet pipe into the back of the toilet, mark the required cut lines, and then cut off any excess pipe.
- Chamfer and Lubricate: Chamfer the edges of the cut pipes and apply seal lubricant to all surfaces for easier insertion and a secure seal.
4.3 Toilet Mounting
- Insert Gasket and Pipes: Insert the gasket, then the outlet pipe and inlet pipe into their respective openings in the wall.
- Align and Mount Toilet: Align the bolt holes on the toilet with the mounting studs on the wall. Carefully push the toilet onto the studs and against the wall.
- Secure Toilet: Tighten the screw nuts to secure the toilet to the wall.
- Trim Excess Gasket: Cut off any excess gasket material around the toilet base for a clean finish.
4.4 Electrical and Water Connections
- Connect Internal Components: Connect the water inlet pipe, the ballcock switch, and the wire of the auto flush mechanism inside the toilet bowl.
- Secure Toilet Plate: Secure the toilet plate into the bowl and tighten the screws. Trim any excess cap material.
4.5 Flush Plate and Remote Control Installation
- Install Flush Plate: Insert the bolts and push plate panel into the wall carrier mechanism.
- Mount Remote Control: Stick the remote control base on the wall using the adhesive provided, then place the remote control onto the base.
4.6 Installation Video
For a visual guide, please refer to the official installation video below:
Video 1: Reference video demonstrating the installation process for the HOROW wall-mounted smart toilet.
5. Operating Instructions
The HOROW Smart Bidet Toilet offers several automated and customizable functions:
- Auto Open/Close Lid: The lid is equipped with a sensor that detects proximity, automatically opening when you approach and closing when you leave.
- Heated Seat: The seat will automatically heat to a pre-set temperature when a user is detected. Temperature can be adjusted via the remote control.
- Bidet Functions:
- Water Temperature: Adjust the water temperature for the bidet wash using the remote control.
- Water Pressure: Control the intensity of the water spray.
- Nozzle Position: Adjust the nozzle's position for optimal cleansing.
- Warm Air Dryer: After bidet use, activate the warm air dryer to gently dry the skin.
- Remote Control: All functions are accessible and adjustable via the provided remote control. Refer to the remote control's specific instructions for detailed button functions.
Image 4: Illustration of the automatic lid opening and closing feature.
Image 5: Close-up view of the heated seat and warm air dryer components.
6. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your smart toilet.
- Exterior Cleaning: Use a soft cloth and mild, non-abrasive cleaner to wipe down the exterior surfaces. Avoid harsh chemicals that may damage the finish.
- Nozzle Cleaning: The bidet nozzle typically has a self-cleaning function. For deeper cleaning, consult the remote control instructions for manual nozzle cleaning cycles.
- Bowl Cleaning: Clean the toilet bowl regularly with a toilet brush and appropriate cleaner. Note that the bowl shape may require more frequent brushing compared to traditional toilets.
- Power Disconnection: Always unplug the unit or turn off the circuit breaker before performing any extensive cleaning or maintenance.
7. Troubleshooting
If you encounter issues with your HOROW Smart Bidet Toilet, refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Auto-open function not working. | Check if the sensor is obstructed. If the issue persists, a replacement seat/electronics unit may be required. Contact customer support. |
| Electronic functions stop working or beep three times. | This may indicate a sensor issue or a temporary electronic malfunction. Try "rebooting" the toilet by pressing the reset button on the GFCI outlet or unplugging and re-plugging the unit. |
| Toilet bowl does not clean well after flushing. | The bowl design may require more frequent manual brushing. Ensure the water pressure is adequate. |
| Lid hits/covers the flush plate. | This can occur due to specific carrier system configurations. Ensure the flush plate is installed correctly and consider consulting a professional if the issue impacts functionality. |
| Water splashing during flush. | Ensure the toilet seat is closed before flushing to minimize splashing. |
For further assistance, please contact HOROW customer support.
8. Specifications
- Brand: HOROW
- Model Number: HR-G10S
- Color: White Toilet
- Material: Ceramic (Bowl), Polypropylene (Seat)
- Item Weight: 64 Pounds
- Product Dimensions: 23.3 x 15 x 16.6 inches
- Installation Type: Wall Mounted
- Shape: Round Toilet Bowl
- Voltage: 120 Volts
- Included Components: Remote Control
- UPC: 732829102442
Image 6: Detailed product dimensions for installation planning.
9. Warranty and Support
The HOROW Luxury Wall Mounted Bidet Toilet comes with a 1-year limited warranty.
For any questions, technical assistance, or warranty claims, please contact HOROW customer service. Professional technical and service teams are available to provide support.
You can visit the official HOROW store for more information: HOROW Store on Amazon
