Tracer TRAGLO46920 Furio TWS Portable Bluetooth Speaker User Manual

1. Introduction

Thank you for purchasing the Tracer TRAGLO46920 Furio TWS Portable Bluetooth Speaker. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.

The Tracer Furio TWS speaker is designed to deliver high-quality stereo sound with the convenience of Bluetooth wireless connectivity. It features a robust 40W output and True Wireless Stereo (TWS) functionality for pairing two speakers.

2. Safety Information

To ensure safe operation and prevent damage, please observe the following precautions:

Do not expose the speaker to extreme temperatures, direct sunlight, or high humidity.
Avoid dropping or subjecting the speaker to strong impacts.
Do not disassemble, repair, or modify the device yourself. Refer all servicing to qualified personnel.
Keep the speaker away from water and other liquids. This product is not waterproof.
Use only the charging cable provided or a certified equivalent.
Do not operate the speaker near medical devices or in environments where wireless communication is restricted.
Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Package Contents

Verify that all items are present in the package:

Tracer TRAGLO46920 Furio TWS Portable Bluetooth Speaker
USB Charging Cable
User Manual (this document)

Image: The Tracer Furio TWS speaker packaging box, showing the speaker and its features.

4. Product Overview

Familiarize yourself with the components of your Tracer Furio TWS speaker.

Tracer Furio TWS Portable Bluetooth Speaker with illuminated grilles

Image: Front view of the Tracer Furio TWS Portable Bluetooth Speaker, showcasing its black finish and illuminated speaker grilles with orange and yellow lighting.

Speaker Components (Typical Layout):

Power Button: Turns the speaker on/off.
Mode Button: Switches between input modes (Bluetooth, AUX, USB, etc.).
Volume Up/Next Track Button: Increases volume or skips to the next track.
Volume Down/Previous Track Button: Decreases volume or goes to the previous track.
Play/Pause Button: Plays or pauses audio.
TWS Button: Initiates True Wireless Stereo pairing.
Charging Port: For connecting the USB charging cable.
AUX Input: For wired audio connection.
USB Port: For USB playback (if supported).
LED Indicator: Shows power status, charging status, and Bluetooth pairing status.

5. Setup

5.1. Charging the Speaker

Before initial use, fully charge the speaker. Connect the provided USB charging cable to the speaker's charging port and the other end to a USB power adapter (not included) or a computer's USB port. The LED indicator will show the charging status and turn off or change color when fully charged.

5.2. Powering On/Off

To power on: Press and hold the Power Button for approximately 3 seconds. You will hear an audible prompt, and the LED indicator will light up.
To power off: Press and hold the Power Button for approximately 3 seconds. You will hear an audible prompt, and the LED indicator will turn off.

6. Operating Instructions

6.1. Bluetooth Pairing

To connect your speaker to a Bluetooth-enabled device:

Ensure the speaker is powered on and in Bluetooth mode. If not, press the Mode Button until you hear the Bluetooth prompt. The LED indicator will flash, indicating it's in pairing mode.
Enable Bluetooth on your audio device (smartphone, tablet, computer).
Search for available Bluetooth devices. You should see "TRAGLO46920" or "Tracer Furio" in the list.
Select the speaker name to connect. Once paired, you will hear a confirmation sound, and the LED indicator will stop flashing and remain solid.
If prompted for a password, enter "0000".

The speaker will automatically attempt to reconnect to the last paired device when powered on.

6.2. True Wireless Stereo (TWS) Pairing

TWS allows you to pair two Tracer TRAGLO46920 Furio speakers together for a stereo sound experience.

Ensure both speakers are powered on and not connected to any Bluetooth device.
On one of the speakers (this will be the primary speaker), press the TWS Button. You will hear a prompt, and the speaker will start searching for another TWS speaker.
The two speakers will automatically connect to each other. Once connected, you will hear a confirmation sound. The primary speaker's LED will flash, and the secondary speaker's LED will be solid.
Now, connect your audio device to the primary speaker via Bluetooth as described in section 6.1.

To disconnect TWS, press the TWS Button on either speaker again.

6.3. Audio Playback

Play/Pause: Press the Play/Pause Button to play or pause audio.
Volume Control: Short press the Volume Up (+) or Volume Down (-) buttons to adjust the volume.
Next/Previous Track: Long press the Volume Up (+) button for the next track, and long press the Volume Down (-) button for the previous track.
AUX Input: Connect an audio device using a 3.5mm audio cable (not included) to the AUX port. The speaker will automatically switch to AUX mode or you may need to press the Mode Button.
USB Playback: Insert a USB flash drive into the USB port. The speaker will automatically switch to USB mode and begin playing supported audio files.

Tracer Furio TWS Portable Bluetooth Speaker with red and green illuminated grilles

Image: The Tracer Furio TWS speaker displaying red and green illumination on its speaker grilles, suggesting dynamic lighting effects.

7. Maintenance

Cleaning: Use a soft, dry, lint-free cloth to clean the speaker's exterior. Do not use liquid cleaners, aerosols, or solvents.
Storage: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures.
Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use, to maintain battery health.

8. Troubleshooting

Problem	Possible Cause	Solution
Speaker does not power on.	Low battery.	Charge the speaker fully.
Cannot pair via Bluetooth.	Speaker not in pairing mode; Bluetooth disabled on device; device too far.	Ensure speaker is in Bluetooth pairing mode (flashing LED). Enable Bluetooth on your device. Move device closer to the speaker (within 10 meters).
No sound.	Volume too low; incorrect input mode; device not playing.	Increase speaker and device volume. Press the Mode Button to select the correct input. Ensure audio is playing on your connected device.
TWS pairing fails.	Speakers already paired to another device; speakers too far apart.	Ensure both speakers are disconnected from other Bluetooth devices. Place speakers close to each other during TWS pairing.

9. Specifications

Model: TRAGLO46920
Brand: Tracer
Connectivity Technology: Bluetooth
Wireless Communication Technology: Bluetooth
Speaker Output Power: 40 Watts (Maximum)
Audio Output Mode: Stereo
Power Source: Battery Powered
Item Weight: 2000 Grams
Color: Black
Special Features: Bluetooth, TWS (True Wireless Stereo)
Waterproof: No

10. Warranty and Support

Tracer products are designed and manufactured to the highest quality standards. For detailed warranty information, please refer to the warranty card included with your purchase or visit the official Tracer website. Keep your proof of purchase for warranty claims.

For technical support or service inquiries, please contact Tracer customer service through their official channels. Contact information can typically be found on the product packaging or the manufacturer's website.