BoxWave EverTouch Capacitive Stylus

BoxWave EverTouch Capacitive Stylus User Manual

Model: EverTouch Capacitive Stylus

1. Introduction and Overview

The BoxWave EverTouch Capacitive Stylus is designed to provide a precise and comfortable interaction with your capacitive touchscreen devices, such as the Soundstorm SDML9ACP. Featuring a durable FiberMesh tip, this stylus offers enhanced accuracy and a natural writing experience without the need for batteries or Bluetooth pairing.

BoxWave EverTouch Capacitive Stylus with feature icons

Figure 1: The EverTouch Capacitive Stylus highlighting its FiberMesh Tip, accurate and responsive performance, and sleek, lightweight design.

Key Features:

  • FiberMesh Tip: Constructed from a tightly-woven conductive material, ensuring high durability and resistance to tearing for prolonged use.
  • High Accuracy: The super conductive fiber material provides ultra-accurate and responsive performance, allowing for use at any screen angle with minimal pressure.
  • Ergonomic Design: Designed with a comfortable length and balanced weight, featuring a lightweight aluminum barrel for a natural feel.
  • Screen Cleaning Functionality: The soft FiberMesh tip helps clean your screen as you use it, reducing streaks and fingerprints.
  • Portable Attachments: Includes three clip-on lanyard attachments (2-inch with 3.5mm headphone jack, 12-inch elastic coil with 3.5mm headphone jack, and a charm clip) for convenient carrying.

2. Setup

The EverTouch Capacitive Stylus requires no complex setup, batteries, or Bluetooth pairing. It is ready for use right out of the box.

Attaching Lanyard (Optional):

  1. Select one of the three provided lanyard attachments based on your preference.
  2. Attach the chosen lanyard to the small loop located at the top end of the stylus.
  3. For the 3.5mm headphone jack attachments, insert the jack into your device's headphone port for secure tethering. For the charm clip, attach it to a keychain, charm, or bracelet.
BoxWave EverTouch Capacitive Stylus with various lanyard attachments

Figure 2: The EverTouch Capacitive Stylus shown with its included lanyard attachments for convenient portability.

3. Operating Instructions

The EverTouch Capacitive Stylus simulates the touch of your finger, providing a natural and intuitive way to interact with your touchscreen device.

Basic Operation:

  • Tapping: Lightly tap the screen with the FiberMesh tip to select items, open applications, or activate buttons, just as you would with your finger.
  • Swiping: Drag the stylus across the screen to scroll, navigate menus, or swipe between pages.
  • Writing and Drawing: Use the stylus for precise input in note-taking apps, drawing programs, or for signing documents. The FiberMesh tip provides a smooth glide.
  • Gaming: Enhance your mobile gaming experience with improved control and accuracy.
Hand using BoxWave EverTouch Capacitive Stylus on a tablet to draw

Figure 3: The EverTouch Capacitive Stylus allows for natural tapping, swiping, and writing on your device's screen without pairing.

The stylus is designed to work with all capacitive touchscreens. No special software or drivers are required.

4. Maintenance

Proper care will ensure the longevity and optimal performance of your EverTouch Capacitive Stylus.

Cleaning:

  • Stylus Body: Wipe the aluminum barrel with a soft, dry, lint-free cloth to remove dust or smudges.
  • FiberMesh Tip: The tip is self-cleaning to some extent as you use it. If excessive debris accumulates, gently wipe the tip with a slightly damp (not wet) cloth. Ensure the tip is completely dry before use.

Storage:

  • Store the stylus in a clean, dry place away from extreme temperatures.
  • Avoid dropping the stylus, especially on hard surfaces, as this may damage the tip or body.
Close-up of the durable FiberMesh tip of the BoxWave EverTouch Capacitive Stylus

Figure 4: The durable FiberMesh tip is designed for longevity and resistance to tearing.

5. Troubleshooting

If you encounter issues with your EverTouch Capacitive Stylus, refer to the following common problems and solutions:

ProblemPossible Cause / Solution
Stylus not responding or inconsistent response.
  • Ensure your device's screen is clean and free of smudges or debris.
  • Check the FiberMesh tip for any visible damage or excessive wear.
  • Confirm your device's touchscreen is functioning correctly with finger input.
Tip appears worn or frayed.
  • The FiberMesh tip is designed for durability, but prolonged heavy use can lead to wear.
  • If performance is significantly degraded, consider replacing the stylus.
Lanyard attachment breaks.
  • The package includes three different lanyard attachments. Use another one.
  • Avoid excessive pulling or snagging on the lanyard.

6. Specifications

AttributeDetail
BrandBoxWave
ModelEverTouch Capacitive Stylus
ColorJet Black
MaterialAluminum (barrel), FiberMesh (tip)
Item Weight0.5 ounces (approx. 14.17 grams)
Batteries RequiredNo
CompatibilityUniversal for capacitive touchscreens (e.g., Soundstorm SDML9ACP)

7. Warranty and Support

BoxWave stands by the quality of its products. For specific warranty details, please refer to the packaging or the official BoxWave website.

This product includes limited 3rd party tech support for your device (up to 3 inquiries via messaging). Please note that this support is not affiliated with or endorsed by Soundstorm.

For further assistance or inquiries, please visit the BoxWave support page or contact their customer service.

BoxWave Official Website: www.boxwave.com

© 2024 BoxWave Corporation. All rights reserved.

Product specifications are subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.