1. Introduction
Thank you for choosing the Anweller Fingerprint Padlock. This smart padlock offers advanced security and convenience with multiple unlocking methods, including fingerprint, mobile app, and traditional key. Designed for durability and weather resistance, it is suitable for various indoor and outdoor applications. Please read this manual carefully to ensure proper setup and operation.
Figure 1: Anweller Fingerprint Padlock with included keys and a smartphone displaying the control app.
2. Setup
2.1 Included Components
- 1 x P10BF Smart Padlock
- 1 x USB-C Charge Cable
- 1 x User Manual (this document)
- 2 x Backup Keys
2.2 Initial Charging
Before first use, fully charge the padlock using the provided USB-C cable. The charging port is located under the pushable weatherproof cover. A full charge can last for approximately 9 months or 3000 unlocks.
Figure 2: Charging the padlock via its USB-C port.
Figure 3: LED battery indicator and app battery level display.
2.3 App Installation and Pairing
Download the official Anweller app from your device's app store (available for Android and iOS). Follow the in-app instructions to pair your padlock via Bluetooth. This will allow for advanced management, including fingerprint registration and unlock records.
Figure 4: The Anweller app interface for managing the smart padlock.
2.4 Fingerprint Registration
After pairing with the app, navigate to the fingerprint management section. Follow the prompts to register your fingerprints. The padlock supports up to 20 fingerprints. Ensure your finger covers the sensor completely during registration for optimal recognition.
Figure 5: Details of the upgraded 3D fingerprint sensor, highlighting its larger size, 0.2-second identification, and 360-degree recognition.
3. Operating the Padlock
3.1 Unlocking with Fingerprint
Place your registered finger firmly on the fingerprint sensor. The padlock will unlock within 0.2 seconds if the fingerprint is recognized.
Video 1: Demonstrates unlocking the padlock using a registered fingerprint.
3.2 Unlocking with Mobile App
Open the Anweller app on your smartphone and ensure Bluetooth is enabled. Select your padlock from the device list. Tap the "Unlock" button within the app to remotely unlock the padlock.
Figure 6: The padlock can be unlocked using the mobile app or an Apple Watch.
3.3 Unlocking with Backup Key
In case of battery depletion or other issues, the padlock can be unlocked using one of the two provided backup keys. Insert the key into the keyhole located under the weatherproof cover and turn to unlock.
Figure 7: Unlocking the padlock using the physical backup key.
4. Maintenance
4.1 Battery Management
The padlock features a low power consumption design. When the battery is low, the padlock will provide a reminder. Recharge the padlock using the USB-C cable as shown in Section 2.2.
Figure 8: The padlock enters a sleep state to conserve energy and wakes up with a touch.
4.2 Cleaning and Weather Protection
Wipe the padlock with a soft, dry cloth to remove dust and debris. For outdoor use, ensure the weatherproof cover over the charging port and keyhole is properly closed to maintain IP67 water and dust resistance.
Figure 9: The padlock is designed to work in all weather conditions, featuring a pushable cover for port protection.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Padlock does not unlock with fingerprint. | Finger not properly placed; unregistered fingerprint; dirty sensor; low battery. | Ensure full contact with sensor; register fingerprint via app; clean sensor; charge padlock. |
| App cannot connect to padlock. | Bluetooth off; padlock out of range; app not updated; low battery. | Enable Bluetooth; move closer to padlock; update app; charge padlock. |
| Padlock is unresponsive. | Battery completely depleted. | Use backup key to unlock, then charge immediately. |
6. Specifications
- Brand: Anweller
- Model Name: P10BF
- Lock Type: Fingerprint, Smart, Key, Biometric
- Material: Alloy Steel, Stainless Steel, Zinc
- Item Dimensions (L x W x H): 3.8 x 2.4 x 0.9 inches
- Item Weight: 11.7 ounces (0.73 Pounds)
- Battery: 160mAh Lithium Ion (included)
- Charging Port: USB-C
- Connectivity: Bluetooth
- Special Features: 4 Unlocking Ways (Fingerprint, Mobile App, Apple Watch, Key), App Controlled, Durable and High-Security, IP67 Weatherproof, Long Battery Life
- Recommended Uses: Outdoor Fence, Gate, Shed, Pool, Yard, Gym, Locker, Outdoor, Indoor, Truck, etc.
7. Warranty and Support
Anweller provides a 6-month free trial period for this product. In addition, customers are eligible for free lifetime technical support. For any queries, replacements, or refunds within the specified periods, please contact Anweller customer support.
- Free Replacement: Available within 12 months.
- Full Refund: Available within 6 months.
- Customer Support: Lifetime technical support and 24/7 response.
