Introduction
This manual provides essential information and instructions for the FITE ON 6ft UL Listed Power Cord. This power cord is specifically designed as a replacement or spare for Maxi-Matic Elite Platinum Pressure Cooker models EPC-1013 and EPC-1013OR. It ensures a reliable and safe electrical connection for your appliance.
Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: The FITE ON 6ft UL Listed Power Cord, featuring the UL certification logo, coiled for display. This image illustrates the product's safety compliance and overall design.
Safety Information
WARNING: This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Always ensure the power cord is fully and securely inserted into both the appliance and the wall outlet. A loose connection can cause overheating or electrical hazards.
- Do not use the power cord if it appears damaged, frayed, cut, or has exposed wires. Immediately replace any damaged cord.
- Keep the power cord away from water, excessive heat sources, and sharp objects to prevent damage and electrical shock.
- Do not overload electrical outlets. Connect the cord to a properly rated and grounded outlet.
- Disconnect the power cord from the wall outlet before cleaning the appliance or performing any maintenance.
- This power cord is intended for indoor use only. Do not use it outdoors or in wet conditions.
Setup and Installation
Follow these steps to properly connect your FITE ON power cord to your Maxi-Matic Elite Platinum Pressure Cooker.
- Step 1: Verify Compatibility
Before connecting, confirm that the power cord's appliance-side connector (C13 type) matches the power input port of your Maxi-Matic Elite Platinum Pressure Cooker (models EPC-1013 or EPC-1013OR). Refer to your appliance's original manual for specific power requirements. - Step 2: Connect to Appliance
Insert the appliance-side connector firmly into the power input port of your pressure cooker. Ensure it is fully seated to establish a secure connection. - Step 3: Connect to Power Outlet
Plug the 3-prong NEMA 5-15P plug into a standard 100-240VAC 50/60Hz wall outlet. Ensure the outlet is easily accessible and properly grounded.
Image: The FITE ON 6ft UL Listed Power Cord displayed in its full length, clearly showing both the 3-prong wall plug (NEMA 5-15P) and the appliance connector (C13). This image aids in identifying the correct connection points.
Operating Instructions
Once the FITE ON power cord is properly connected to both the Maxi-Matic Elite Platinum Pressure Cooker and a suitable wall outlet, it will supply the necessary electrical power to the appliance. The power cord itself does not require any specific operational steps beyond proper connection.
Always refer to the operating instructions provided with your Maxi-Matic Elite Platinum Pressure Cooker for details on how to use the appliance safely and effectively.
Care and Maintenance
Proper care and maintenance will extend the life of your FITE ON power cord and ensure continued safe operation.
- Cleaning: Disconnect the power cord from both the appliance and the wall outlet before cleaning. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners, abrasive materials, or immerse the cord in water.
- Storage: When not in use, coil the power cord loosely. Avoid tight coiling, kinking, or bending the cord sharply, as this can damage the internal wires and insulation. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the entire length of the power cord, including the plugs, for any signs of damage such as cuts, fraying, cracks, or discoloration. If any damage is observed, discontinue use immediately and replace the cord with a new, compatible one.
Image: The FITE ON 6ft UL Listed Power Cord neatly coiled, viewed from above. This demonstrates a recommended method for storing the cord to prevent damage and prolong its lifespan.
Troubleshooting
If you encounter issues with your appliance not receiving power, consider the following troubleshooting steps related to the power cord:
- Appliance not powering on:
- Ensure the power cord is securely plugged into both the Maxi-Matic Elite Platinum Pressure Cooker and the wall outlet.
- Check if the wall outlet is functional by plugging in another known working device. If the outlet is not working, check your circuit breaker.
- Inspect the power cord for any visible damage. If the cord is damaged, it must be replaced. Do not attempt to repair it.
- If the cord appears undamaged and connections are secure, refer to your Maxi-Matic Elite Platinum Pressure Cooker's manual for further appliance-specific troubleshooting.
Specifications
| Input Voltage | 100-240VAC, 50/60Hz (World Wide Input Voltage) |
| Cord Length | 6 feet |
| Color | Black |
| Appliance Connector Type | C13 |
| Wall Plug Type | NEMA 5-15P (3-prong) |
| Safety Certification | UL Listed |
| Protection Features | OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection) |
| Model Number | FITEON-NS96-JA2159 |
| Item Weight | 3 ounces |
| Package Dimensions | 3 x 2 x 1 inches |
Warranty and Support
For warranty information, technical assistance, or any product-related inquiries, please contact FITE ON directly. Refer to the product packaging or the official FITE ON website for the most current contact details and support resources.
This product is manufactured with strict quality control and includes built-in protection features (OVP, OCP, SCP) to ensure safe and reliable operation.