Cambro Camwear 1-Pint Polycarbonate Measuring Cup

Introduction

Thank you for choosing the Cambro Camwear 1-Pint Polycarbonate Measuring Cup. This durable and reliable measuring cup is designed for accurate liquid and dry ingredient measurements in various kitchen and food service environments. Constructed from virtually unbreakable Camwear polycarbonate, it resists denting and ensures consistent performance. Please read this manual carefully before initial use to ensure proper handling and maintenance.

Setup

Before first use, wash the measuring cup thoroughly with warm, soapy water. Rinse completely and dry. Ensure no residue remains from packaging or manufacturing processes.

Image: The Cambro Camwear 1-Pint Polycarbonate Measuring Cup, clear with red measurement markings.

Operating Instructions

1. Measuring Liquids: Place the measuring cup on a flat, level surface. Pour the liquid into the cup until it reaches the desired measurement line. Bend down to eye level to ensure an accurate reading at the bottom of the meniscus.
2. Measuring Dry Ingredients: For dry ingredients like flour or sugar, spoon the ingredient into the cup until it overflows. Use a straight edge (like the back of a knife) to level off the top, ensuring an accurate measurement.
3. Temperature Use: This polycarbonate measuring cup is designed to withstand a wide range of temperatures, making it suitable for both hot and cold ingredients.

Image: The Cambro Camwear 1-Pint Measuring Cup showing its dimensions (5.0 inches / 12 cm height).

Maintenance

• Cleaning: The Cambro Camwear measuring cup is dishwasher safe. For best results and to preserve clarity, hand washing with mild soap and warm water is recommended, especially for commercial dishwashers which may use harsher detergents or higher temperatures.
• Storage: Store in a clean, dry place. Stacking multiple cups is possible due to their design.
• Avoid Abrasives: Do not use abrasive cleaners or scouring pads, as these can scratch the surface and impair visibility of measurement markings.

Troubleshooting

• Difficulty Reading Markings: Ensure the measuring cup is placed on a level surface and viewed at eye level. If markings appear faded over time, this may be due to harsh cleaning agents or prolonged exposure to high heat. Consider replacing the cup if accuracy is compromised.
• Staining: Certain highly pigmented foods or spices may cause temporary staining. Prompt cleaning after use can help prevent this. For persistent stains, a mild bleach solution (diluted) can be used, followed by thorough rinsing.

Specifications

Warranty Information

This Cambro product is covered by a 3-Year pro-rated guarantee. For specific details regarding warranty claims and coverage, please refer to the official Cambro warranty documentation or contact Cambro customer support.

Support

For further assistance, product inquiries, or to report any issues not covered in this manual, please visit the official Cambro website or contact their customer service department. Contact information can typically be found on the Cambro website or product packaging.