MAIWO Dual Bay M.2 NVMe Docking Station and Cloner (Model: M.2 NVME) Instruction Manual

1. Introduction

Thank you for choosing the MAIWO Dual Bay M.2 NVMe Docking Station and Cloner. This device is designed for efficient data management, offering both high-speed data transfer and convenient offline cloning capabilities for M.2 NVMe SSDs. It supports various M.2 SSD sizes and provides a reliable solution for expanding storage capacity and duplicating drives.

2. Package Contents

Please verify that all items are present in your package:

• M.2 Docking Station (K3016P)
• Power Supply
• Instruction Manual
• USB-C to USB-C Cable
• USB-C to USB-A Cable

Image: The MAIWO Dual Bay M.2 NVMe Docking Station, power adapter, USB-C to USB-C cable, USB-C to USB-A cable, and user manual.

3. Product Overview

The MAIWO M.2 NVMe Docking Station features a compact design with dual bays for M.2 NVMe SSDs. It supports USB 3.1 Gen 2 with a maximum transmission speed of 10Gbps and allows for up to 8TB capacity expansion. The device is equipped with LED indicators for operational status and cloning progress, along with a no-slip pad for stability.

Image: The docking station connected to a laptop, illustrating its 10Gbps high-speed data transfer capability and dual NVMe slots.

Image: A close-up of the docking station showing its tool-free plug-and-play design and vertical heat dissipation features.

4. Setup

4.1. Inserting M.2 NVMe SSDs

1. Ensure the docking station is powered off and disconnected from any computer.
2. Carefully insert your M.2 NVMe SSDs into the designated slots (Source and Target). The docking station supports M.2 SSD sizes 2230, 2242, 2260, 2280, and 22110, compatible with M-Key and B+M Key NVMe SSDs.

Image: A diagram illustrating the supported M.2 NVMe SSD types (M-Key and B+M Key).

4.2. Connecting Power and Data Cables

1. Connect the power supply to the DC IN port on the docking station.
2. For computer connectivity, use the provided USB-C to USB-C or USB-C to USB-A cable to connect the docking station to your computer.
3. Power on the docking station using the power switch. The drive slot LED lights will illuminate after 3-5 seconds.

Image: Rear view of the docking station, highlighting the Type-C data port, DC IN power port, and the Copy/JBOD switch.

4.3. Initializing Disk (for new SSDs)

For new SSDs, you may need to initialize and format them before use:

1. Right-click "This PC" (or "My Computer") and select "Manage".
2. In the Computer Management window, navigate to "Disk Management".
3. Locate your new SSD, right-click it, and select "Initialize Disk". Choose MBR for disks smaller than 2TB (Windows XP compatible) or GPT for disks larger than 2TB.
4. After initialization, right-click the unallocated space on the new SSD and select "New Simple Volume" to create a partition and format the drive.

5. Operating Modes

5.1. Read/Write Mode (Docking Station Functionality)

When connected to a computer, the docking station functions as an external drive enclosure, allowing you to read and write data to your M.2 NVMe SSDs. Ensure the Copy/JBOD switch on the rear is set to the 'JBOD' position for this mode.

5.2. Offline Clone Function

The one-key offline clone function allows you to duplicate an SSD without connecting to a computer.

1. Insert the Source SSD (the drive you want to copy from) into the 'Source' slot.
2. Insert the Target SSD (the drive you want to copy to) into the 'Target' slot. Important: The capacity of the Target SSD must be equal to or larger than the Source SSD.
3. Ensure the docking station is disconnected from any computer.
4. Connect the power supply and turn on the docking station.
5. Set the Copy/JBOD switch on the rear to the 'Copy' position.
6. Press and hold the 'Clone' button for 5-8 seconds until the LED indicators start to flash.
7. The LED indicators (25%, 50%, 75%, 100%) will illuminate sequentially to show the cloning progress. All lights will stay on when the cloning process is complete.

Image: The docking station performing an offline clone, showing the source and target SSDs and the clone button.

Image: A visual representation of the cloning process with LED indicators showing progress from 25% to 100%.

6. Compatibility

The MAIWO K3016P M.2 cloner dock is compatible with a wide range of devices and operating systems:

• Devices: PS4, Smart TV, Computers (PC, Laptop), Smart Router, Phones (with OTG support).
• Operating Systems: Windows 7, Windows 8, Windows 8.1, Windows 10, MAC OS, Linux, etc.

Image: The docking station demonstrating compatibility with multiple devices including laptops, desktops, PS4, and TVs.

7. Features

• Tool-Free Installation: Easy insertion and removal of M.2 SSDs without tools.
• Vertical Heat Dissipation: Designed to help reduce heat buildup during operation, especially during large data transfers.
• No-Slip Pad: Silicone pad on the bottom ensures stability and prevents movement.
• LED Indicators: Clear LED lights indicate M.2 NVMe work status and cloning progress.

8. Maintenance

To ensure the longevity and optimal performance of your MAIWO Dual Bay M.2 NVMe Docking Station:

• Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the device to extreme temperatures or humidity.
• Handle SSDs carefully during insertion and removal to prevent damage to the connectors.
• Ensure proper ventilation, especially during extended use or large data transfers, to aid in heat dissipation.

9. Troubleshooting

• Device not recognized by computer: Ensure all cables (power and data) are securely connected. Try a different USB port on your computer. For new SSDs, ensure they are initialized and formatted via Disk Management.
• Offline cloning fails or disconnects: Verify that the Target SSD's capacity is equal to or larger than the Source SSD. Ensure the Copy/JBOD switch is correctly set to 'Copy'. For high-performance or large-capacity SSDs, ensure the DC power supply is used to provide sufficient power.
• Slow transfer speeds: Ensure you are using a USB 3.1 Gen 2 compatible port on your computer. Check that the cables are not damaged.
• Overheating during operation: The device has vertical heat dissipation. Ensure it is placed in a well-ventilated area. For prolonged heavy use, external cooling (e.g., a small fan) may be beneficial.

10. Specifications

11. Warranty and Support

MAIWO is committed to providing high-quality data storage products. For any product-related inquiries, technical support, or warranty claims, please contact MAIWO customer service through the retailer's platform or the official MAIWO website. We appreciate your purchase and are dedicated to serving you.