Foreword
Thank you for purchasing a MAIWO product. To ensure you can use this product effectively, please read the operational points and precautions mentioned in this manual carefully before formal use.
MAIWO is a registered trademark of Shenzhen Kaixiangyuan Technology Co., Ltd.
Disclaimer
Shenzhen Kaixiangyuan Technology Co., Ltd. is responsible for warranty and repair issues pertaining to the product itself. The company assumes no responsibility for data deletion, modification, or loss caused by user operation, nor for any indirect losses resulting therefrom. Given the inestimable value of data, please back up important data yourself before operating this product.
Product Overview & Specifications
Product Name: MAIWO K3016P2 2-Bay AHCI & M.2 NVMe Solid State Drive Docking Station
| Specification | Details |
|---|---|
| Product Name | MAIWO K3016P2 2-Bay AHCI & M.2 NVMe SSD Docking Station Duplicator |
| Supported Drives | M.2 NVMe SSD / AHCI SSD (Note: AHCI SSDs require a transfer adapter to connect to the M.2 interface. MAIWO KT065 transfer board is recommended, which supports AHCI SSDs for Macbook Air/Pro 2013-2017 models. Refer to the manual for details.) |
| Product Bays | Dual-bay |
| External Interface | Type-C |
| Product Material | ABS High-Strength Engineering Plastic |
| Product Function | One-to-one offline hard drive copy (cloning); Data transmission. |
| Product Size | 78.5 x 76.5 x 19.1 MM |
| Operating System | Windows XP/7/8/10/11, Mac OS, Linux |
| Indicator Status |
|
Operation Guide
1. Product Read/Write Function
1.1. Setup: Insert the hard drive(s) into the slots. Connect the power adapter to the DC IN port. Connect the data cable to the PC port (and the other end to your computer).
Note: Only the Source port can accept converted AHCI hard drives.
1.2. Power On: Press the power switch. The corresponding SSD indicator light will turn white. If there is an abnormality in disk recognition, the indicator light for that bay will blink red.
Note: If using a used hard drive, it will appear as a new drive in "Computer" and can be read/written normally. If using a new hard drive, it needs to be initialized, partitioned, and formatted before use.
2. New Hard Drive Initialization, Partitioning, and Formatting Tutorial
2.1. Hard Drive Initialization: Right-click on "Computer", then select "Manage" and navigate to "Disk Management". Locate the new disk and initialize it.
Note: When initializing a hard drive, you can choose between MBR and GPT formats. Select MBR format if your drive is 2TB or smaller, and GPT format if it is larger than 2TB.
2.2. Partitioning and Formatting: After initialization, the new hard drive will appear as "Disk 1". Right-click on "Disk 1" and select "New Simple Volume". Follow the on-screen prompts to partition the drive, choosing the desired partition size. You can create multiple partitions by selecting the format option and proceeding step-by-step until completion.
2.3. Completion: Follow the instructions to choose the partition size, then click "Next" to finish.
2.4. Usage: You can then find the new hard drive in "Computer" and it is ready for use.
3. Hard Drive Cloning
3.1. Setup: Insert the hard drives into their respective slots. Ensure the Source slot has the original data disk, and the Target slot has the disk to be copied. The actual capacity of the Target disk must be greater than or equal to the Source disk's capacity for cloning to be possible. Connect the power adapter to the DC IN port; the data cable is not required for cloning.
Note: Only the Source port can accept converted AHCI hard drives.
4. Cloning Operation
4.1. Power On: Press the power switch. The corresponding SSD indicator light will turn white. If a disk is abnormal, its indicator light will blink red.
4.2. Initiate Clone: Once the SSD indicator lights are on normally, long-press the clone button located at the bottom right for 3-5 seconds. The 25%-100% blue clone progress indicator lights will begin to flicker. Press the clone button again. The 25%-100% blue clone progress indicator lights will start to cycle and flicker sequentially (the SSD indicator lights will also flicker), indicating that cloning has begun.
4.3. Cloning Complete: When the clone progress reaches 25%, the light will stay solid. This continues sequentially for 50%, 75%, and 100%. Once all progress lights are solid, and the SSD indicator lights are also solid, the cloning process is complete. Turn off the power and then remove the hard drives.
Warranty and Technical Support
Warranty Policy:
- This product adheres to the national "Three Guarantees" policy: 7 days for return, 15 days for exchange, and 1 year for warranty, calculated from the date the customer receives the product.
- Accessories such as power cords and USB cables are not covered under warranty. Paid replacement is required for damage.
- Damage caused by natural disasters is not covered under warranty; paid repair services can be provided.
- Paid warranty service is available for product malfunctions caused by improper consumer use.
Technical Support:
If you encounter any issues during operation, please call our customer service hotline at 4000-666-205. Our technical staff will provide you with technical support.
Customer Service Hotline: 4000-666-205
Warranty Card Information Placeholder:
Product Brand: MAIWO
Model: K3016P2
Purchase Date:
Warranty Period:
User Name:
Contact Phone:
Customer Address:
