WOSTOKE WS-D0667B

WOSTOKE 10.33" QLED Car CarPlay Android Auto Navigation Stereo User Manual

Model: WS-D0667B for Nissan NV200 (2013-2019)

1. Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your WOSTOKE 10.33" QLED Car CarPlay Android Auto Navigation Stereo. Please read this manual thoroughly before installation and use to ensure proper function and safety. This unit is designed for Nissan NV200 models manufactured between 2013 and 2019.

2. Setup

2.1 Compatibility Check

Before proceeding with installation, it is crucial to verify the compatibility of this head unit with your specific Nissan NV200 model. There are variations in dashboard designs for the Nissan NV200 (2013-2019). Please compare your vehicle's original dashboard with the images provided below to ensure a correct fit. Pay close attention to the shape of the central console and the presence of any control knobs or rollers.

Comparison of two Nissan NV200 dashboard types for head unit compatibility

Image: Comparison of two dashboard types for Nissan NV200. Unit A is compatible, while Unit B is not if your vehicle has two rollers in the center console.

Dimensions of the head unit frame for Nissan NV200

Image: Detailed dimensions of the head unit frame. Please measure your vehicle's opening to confirm fitment: 14.96 inches (38cm) width, 9.84 inches (25cm) height, and 7.68 inches (19.5cm) inner width.

2.2 Package Contents

Verify that all components listed below are present in your package:

  • 1x Car Android Head Unit with Mask (10.33 Inch)
  • 1x GPS Antenna
  • 1x Power Cable
  • 2x USB Port Cables (4-pin and 6-pin)
  • 1x RCA Expand Cable
  • 1x RCA Connector for Reverse Camera
  • 1x Install Kit
  • 1x External Microphone
  • 1x AHD 720 Reverse Camera (Gift)
  • 1x Crowbar (Gift)
Contents of the product package including head unit, cables, and accessories

Image: Visual representation of all items included in the package.

2.3 Installation Guide

Professional installation is highly recommended for this product. Incorrect installation can lead to damage to the unit or your vehicle's electrical system. The general steps are as follows:

  1. Preparation: Disconnect the vehicle's battery to prevent electrical shorts.
  2. Remove Original Unit: Carefully remove the existing car stereo and dashboard trim using appropriate tools. Refer to your vehicle's service manual for specific instructions.
  3. Connect Wiring: Connect the provided power cable, GPS antenna, USB cables, RCA cables, and reverse camera cable to the new head unit. Ensure all connections are secure.
  4. Test Functionality: Before fully reassembling the dashboard, temporarily connect the battery and test the basic functions of the head unit (power, audio, touchscreen, GPS signal, camera input).
  5. Mount New Unit: Secure the new head unit into the dashboard opening.
  6. Reassemble Dashboard: Reinstall all dashboard trim pieces.
  7. Final Check: Reconnect the battery and perform a comprehensive test of all features.
Before and after installation comparison of the head unit in a Nissan NV200 dashboard

Image: Visual comparison showing the original dashboard setup and the new head unit installed.

3. Operating Instructions

3.1 Basic Operation

  • Power On/Off: The unit typically powers on automatically with the vehicle's ignition. To manually power off or restart, locate the power button on the unit or within the software interface.
  • Touchscreen: The 10.33-inch QLED capacitive touchscreen responds to touch gestures similar to a smartphone or tablet. Tap to select, swipe to navigate menus, and pinch to zoom.
  • Volume Control: Adjust volume using the on-screen controls or your vehicle's steering wheel controls.

3.2 CarPlay and Android Auto

This unit supports both Apple CarPlay and Android Auto, allowing seamless integration of your smartphone for navigation, music, calls, and messaging. Connect your compatible iOS or Android device via USB to activate these features.

  • CarPlay (for iOS devices): Connect your iPhone via USB. The CarPlay interface will automatically launch on the head unit's screen. Use Siri for voice commands.
  • Android Auto (for Android devices): Connect your Android phone via USB. Ensure Android Auto is installed on your phone. The Android Auto interface will appear on the head unit. Use Google Assistant for voice commands.
CarPlay and Android Auto interfaces displayed on the head unit with connected smartphones

Image: Demonstrates CarPlay for iOS and Android Auto for Android devices, showing their respective interfaces on the head unit.

CarPlay and Android Auto in-car experience with a smartphone connected

Image: Illustrates the integrated CarPlay and Android Auto experience within the vehicle's dashboard.

3.3 GPS Navigation

The unit features built-in GPS for real-time navigation. With a Wi-Fi connection, you can access online maps and traffic information. The system supports various navigation applications.

  • Offline Maps: Pre-installed maps for North America are available for use without an internet connection.
  • Online Navigation: Connect to Wi-Fi (e.g., via a mobile hotspot) to use online navigation apps for real-time traffic updates and broader map coverage.
  • Supported Apps: The unit supports popular navigation applications such as Google Maps, iGO, Waze, and Navitel.
GPS navigation interface showing a map and route on the head unit screen

Image: The GPS navigation screen displaying a map, current location, and route information.

Various navigation app icons supported by the head unit

Image: Icons representing various supported navigation applications.

3.4 Bluetooth Functionality

The built-in Bluetooth module allows for hands-free calling and wireless audio streaming.

  • Pairing: Go to the Bluetooth settings on the head unit and enable Bluetooth. Search for available devices on your smartphone and select the head unit's name to pair.
  • Hands-Free Calling: Once paired, you can make and receive calls directly through the head unit, using the built-in microphone and car speakers.
  • Audio Streaming: Play music from your smartphone wirelessly through the car's audio system.
Bluetooth calling and music streaming features on the head unit

Image: Illustrates Bluetooth features including hands-free calling and wireless music playback.

3.5 Steering Wheel Control (SWC)

The unit supports your vehicle's original steering wheel controls, allowing you to manage audio, calls, and other functions without taking your hands off the wheel.

  • Configuration: Access the 'Steering Learn' or 'SWC Settings' menu in the head unit's settings. Follow the on-screen prompts to map your steering wheel buttons to the desired functions.
  • Functions: Typically includes volume up/down, track skip, mode change, and answer/end call.
Steering wheel control interface on the head unit, showing button mapping options

Image: The 'Steering Learn' interface for configuring steering wheel controls.

Steering wheel with illuminated control icons

Image: Visual representation of steering wheel controls in use.

3.6 Car Reverse Camera

The included AHD 720 reverse camera provides a clear view of the area behind your vehicle when reversing, enhancing safety and aiding parking maneuvers.

  • Automatic Display: When the vehicle is shifted into reverse gear, the head unit automatically displays the camera feed.
  • Guidelines: Dynamic or static parking guidelines may be displayed on the screen to assist with parking.
Car reverse camera view displayed on the head unit screen with parking guidelines

Image: The reverse camera view showing parking guidelines on the head unit screen.

Rear view camera display in a car interior

Image: An in-car view of the reverse camera display.

3.7 FM Radio

Tune into your favorite FM radio stations. The unit allows you to scan for stations and save presets.

  • Scanning: Use the on-screen controls to automatically scan for available stations or manually tune to a specific frequency.
  • Presets: Long-press on a frequency to save it as a favorite station for quick access.
FM radio interface on the head unit screen showing frequency and controls

Image: The FM radio interface displaying current frequency and control options.

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your head unit.

  • Screen Cleaning: Use a soft, lint-free cloth specifically designed for electronic screens. Dampen the cloth slightly with water or a screen-cleaning solution. Avoid harsh chemicals or abrasive materials.
  • Software Updates: Periodically check for software updates provided by WOSTOKE. Updates can improve performance, add new features, and fix bugs. Follow the instructions provided with the update package.
  • Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

5. Troubleshooting

If you encounter issues with your head unit, refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
No PowerLoose power connection, blown fuse, vehicle battery issue.Check power cable connections. Inspect vehicle fuses. Ensure vehicle battery is charged.
No SoundVolume too low, mute activated, speaker wiring issue, incorrect audio source.Increase volume. Check if mute is active. Verify speaker connections. Select correct audio source.
GPS Signal LossGPS antenna obstruction, poor satellite reception, antenna not connected.Ensure GPS antenna has a clear view of the sky. Check antenna connection. Move to an open area.
Touchscreen UnresponsiveSoftware glitch, screen calibration issue.Restart the unit. If issue persists, perform a factory reset (refer to settings menu).
CarPlay/Android Auto Not ConnectingFaulty USB cable, phone software issue, incorrect settings.Try a different USB cable. Ensure phone OS and app are updated. Check head unit settings for CarPlay/Android Auto.

If these steps do not resolve the issue, please contact customer support.

6. Specifications

Key technical specifications for the WOSTOKE 10.33" QLED Car CarPlay Android Auto Navigation Stereo:

  • Model Number: WS-D0667B
  • Screen Size: 10.33 Inches
  • Display Type: QLED, LCD
  • Resolution: 800 x 480 (Note: Some QLED panels may support higher internal processing resolutions, but the output resolution is 800x480)
  • Operating System: Android
  • Memory Storage Capacity: 32 GB
  • Connectivity Technology: USB, Bluetooth, Wi-Fi
  • Special Features: CarPlay, Android Auto, GPS Navigation, Touchscreen, Bluetooth, Steering Wheel Control Support, Reverse Camera Input
  • Map Type: North America (pre-installed)
  • Mounting Type: Dashboard Mount
  • Audio Output Mode: Stereo
  • Included Components: Head unit, GPS antenna, power cable, USB cables, RCA cables, install kit, external mic, AHD 720 reverse camera.
Display specifications: 10.33 Inch, 2.5D QLED, 1600*720

Image: Highlights key display specifications including screen size, QLED technology, and resolution.

7. Warranty and Support

Your WOSTOKE head unit comes with a one-year warranty covering manufacturing defects. This warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

For any questions, technical assistance, or warranty claims, please contact the seller directly. Your consultation is always welcomed, and after-sales support is guaranteed.

© 2024 WOSTOKE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.