Introduction
This manual provides comprehensive instructions for the operation and maintenance of your Heymell Remote Control, specifically designed for the Heymell Soundbar Voyage203. Please read this manual carefully before use to ensure proper functionality and to maximize your product experience.
Product Overview
Figure 1: Heymell Remote Control for Voyage203 Soundbar. This image displays the remote control with its various buttons for power, input selection, volume, playback, and sound modes.
The Heymell Remote Control is an infrared (IR) remote designed to control the Heymell Soundbar Voyage203. It provides access to all essential functions of the soundbar, including power, volume, input selection, and various sound modes.
Button Functions
- Power Button (⏻): Turns the soundbar on or off.
- Mute Button (🔇): Mutes or unmutes the soundbar audio.
- Input Selection Buttons:
- BT: Selects Bluetooth input.
- OPTICAL: Selects Optical input.
- ARC/COA: Selects ARC (Audio Return Channel) or Coaxial input.
- AUX/USB: Selects Auxiliary or USB input.
- Volume Up (+): Increases the volume level.
- Volume Down (-): Decreases the volume level.
- Previous Track (⏮): Skips to the previous track (for compatible inputs like Bluetooth/USB).
- Next Track (⏭): Skips to the next track (for compatible inputs like Bluetooth/USB).
- Play/Pause (⏸): Plays or pauses media playback (for compatible inputs like Bluetooth/USB).
- S1/S2: Selects a specific sound mode or input preset.
- MUSIC: Activates Music sound mode.
- MOVIE: Activates Movie sound mode.
- S-BASS: Activates Super Bass mode for enhanced low frequencies.
- NEWS/GAME: Activates News or Game sound mode.
- LOWER: Adjusts a specific audio parameter, possibly related to bass or treble reduction.
- BASS+: Increases the bass level.
- BASS-: Decreases the bass level.
- 3D/LED OFF: Activates 3D surround sound mode or turns off the soundbar's LED display.
Setup
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide open the battery cover.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals match the markings inside the compartment.
- Close the battery cover securely.
- Note: The remote control requires 2 AAA batteries (not included).
Initial Use
The Heymell Remote Control operates using infrared (IR) technology and typically does not require pairing. Once batteries are installed, point the remote directly at the Heymell Soundbar Voyage203 to control it.
Operating Instructions
Basic Functions
- Power On/Off: Press the Power Button.
- Volume Adjustment: Use the Volume Up (+) and Volume Down (-) buttons.
- Mute/Unmute: Press the Mute Button.
- Input Selection: Press the corresponding input button (BT, OPTICAL, ARC/COA, AUX/USB) to switch audio sources.
Sound Mode Selection
The Voyage203 Soundbar offers various sound modes to optimize your listening experience. According to product specifications, the Voyage203 has five distinct sound modes. Press the following buttons to select a desired mode:
- MUSIC: Ideal for listening to music.
- MOVIE: Enhances audio for movies.
- NEWS/GAME: Optimizes dialogue clarity for news or provides immersive sound for gaming.
- S1/S2: Selects additional sound presets.
- S-BASS: Engages a special bass enhancement mode.
- BASS+ / BASS-: Fine-tune the bass level to your preference.
- 3D/LED OFF: Activates 3D surround sound or toggles the soundbar's LED display.
Note: The specific mapping of the five sound modes to the S1/S2 and NEWS/GAME buttons may require referring to your Heymell Soundbar Voyage203's main user manual for detailed functionality. The NEWS/GAME button may also function as a RESET button for certain settings.
Maintenance
Battery Replacement
If the remote control's range decreases or buttons become unresponsive, it may be time to replace the batteries. Follow the battery installation steps outlined in the Setup section.
- Always replace both batteries at the same time.
- Do not mix old and new batteries, or different types of batteries.
- Remove batteries if the remote control will not be used for an extended period to prevent leakage.
- Dispose of used batteries responsibly according to local regulations.
Cleaning
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the surface or internal components.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control not working. | Dead or incorrectly inserted batteries. Obstruction between remote and soundbar. Remote is too far from the soundbar. | Replace batteries, ensuring correct polarity. Remove any objects blocking the line of sight. Move closer to the soundbar. |
| Soundbar not responding to specific buttons. | Incorrect input selected. Feature not available for current input. | Ensure the correct input source is selected on the soundbar. Refer to the soundbar's manual for feature compatibility. |
| Intermittent control. | Low battery power. Interference from other devices. | Replace batteries. Ensure no strong light sources (e.g., direct sunlight, fluorescent lights) are interfering with the IR signal. |
Specifications
- Model: Heymell Remote Control for Voyage203 Soundbar
- Connectivity Technology: Infrared (IR)
- Compatible Devices: Heymell Soundbar Voyage203 (and Voyage201 with minor button text differences)
- Power Source: 2 x AAA Batteries (not included)
- Product Dimensions: 5.71 x 1.77 x 0.79 inches (14.5 x 4.5 x 2 cm)
- Item Weight: 3.2 ounces (90.7 grams)
- Manufacturer: Heymell Tech
Warranty and Support
For warranty information or technical support, please refer to the documentation included with your Heymell Soundbar Voyage203 or visit the official Heymell website. You may also contact Heymell customer service directly for assistance with your remote control.
Please note that this remote control is specifically designed for the Heymell Soundbar Voyage203. Compatibility with other models is not guaranteed, though it may function with the Voyage201 with some button label differences as noted in the product description.
