1. Introduction
Thank you for choosing the Bellemave L Shaped Twin Corner House Bed. This manual provides detailed instructions for the safe assembly, proper use, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
2. Safety Information
- Always follow the assembly instructions precisely. Do not deviate from the steps provided.
- Ensure all hardware is securely tightened before use. Periodically check and re-tighten as necessary.
- Do not allow children to play on or under the bed during assembly.
- This bed is designed for twin-size mattresses. Do not use mattresses that exceed the recommended dimensions.
- Maximum weight capacity per bed is 250 lbs. Do not exceed this limit.
- Keep small parts and packaging materials away from children to prevent choking hazards.
- This product is intended for indoor use only.
- Assembly requires two adults. Do not attempt to assemble alone.
3. Package Contents
Your Bellemave L Shaped Twin Corner House Bed will arrive in two separate boxes. Please ensure both packages have arrived before beginning assembly. Carefully unpack all components and verify against the parts list provided in your physical instruction booklet. If any parts are missing or damaged, please contact customer service immediately.
Image 3.1: Overall dimensions of the L-shaped twin corner house bed.
4. Setup and Assembly Instructions
Follow these steps to assemble your Bellemave L Shaped Twin Corner House Bed. It is recommended to have two adults for assembly.
4.1. Prepare the Area
Clear a spacious area for assembly. Lay out all parts on a soft, clean surface to prevent scratches. Identify all hardware and tools required as per your physical manual.
4.2. Assemble the Bed Frames
Begin by assembling the individual twin bed frames. Attach the side rails to the headboards and footboards using the provided hardware. Ensure all connections are snug but do not overtighten until the entire frame is stable.
Image 4.1: Detail of the bed slats and corner connection.
4.3. Construct the House Roof and Window Panel
Assemble the roof structure and the decorative window panel according to the diagrams in your manual. These components will form the unique house design of your bed.
Image 4.2: Detail of the house bed's window feature.
4.4. Connect the L-Shaped Configuration
Once the individual bed frames and house components are ready, connect them to form the L-shaped configuration. Ensure the corner connections are secure and aligned. Install the bed slats onto both frames, ensuring even spacing and secure attachment.
Video 4.1: Animated assembly guide for the L-shaped house bed for two kids. This video demonstrates the step-by-step construction of the bed frame, including the L-shaped connection and roof structure.
4.5. Final Tightening and Mattress Placement
After all components are assembled, go back and fully tighten all bolts and screws. Place your twin-size mattresses onto the bed frames. The bed is now ready for use.
Image 4.3: The Bellemave L Shaped Twin Corner House Bed fully assembled.
5. Operating Instructions
The Bellemave L Shaped Twin Corner House Bed is designed for comfortable and functional use by two children. Its low height allows for easy access, promoting independence.
5.1. Bed Usage
Each twin bed is suitable for one child. The L-shaped design optimizes space in a corner, providing individual sleeping areas while keeping children close. The decorative roof structure can be used for light decorations, but avoid hanging heavy items.
5.2. Storage (if applicable)
Some variants of this bed may include under-bed storage drawers or a pull-out trundle bed. If your model includes these features, ensure drawers slide smoothly and the trundle bed is properly extended and retracted when in use or stored. The trundle bed is designed to accommodate an additional twin-size mattress for guests or play.
Video 5.1: Demonstration of an L-shaped twin house bed, including a pull-out trundle bed and storage drawers. This video highlights the functional aspects and space-saving design.
6. Maintenance
- Cleaning: Wipe the bed frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the wood finish.
- Hardware Check: Periodically inspect all bolts, screws, and connections to ensure they remain tight. Re-tighten as needed to maintain stability and safety.
- Wood Care: Protect the wood from extreme temperature changes and direct sunlight to prevent warping or fading.
7. Troubleshooting
- Wobbling: If the bed feels wobbly, check all connections and tighten any loose hardware. Ensure the bed is on a flat, even surface.
- Missing Parts: If you discover any missing parts upon unpacking, do not proceed with assembly. Contact Bellemave customer service immediately for assistance.
- Difficulty Assembling: Review the assembly video and diagrams carefully. Ensure you are using the correct hardware for each step. If issues persist, contact customer service.
8. Specifications
| Size | Twin |
| Product Dimensions | 118.1"L x 76.6"W x 75.1"H |
| Color | Grey |
| Material | Engineered Wood, Pine Wood |
| Assembly Required | Yes |
| Weight Capacity (Each Bed) | 250 lbs |
| Model Number | bed-frames |
9. Warranty and Support
Your Bellemave L Shaped Twin Corner House Bed comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects. For warranty claims, missing parts, or any other inquiries, please contact Bellemave customer service. Please have your purchase information and model number ready when contacting support.
Customer Service: Refer to your purchase documentation or the Bellemave official website for contact details.
