Introduction
This manual provides detailed instructions for the safe and efficient operation of your LEESKY 2000 Watt Power Inverter. This device converts 12V DC battery power to 110V/120V AC household power, making it ideal for use in vehicles, RVs, off-grid solar systems, and during outdoor activities. It features a robust design with multiple protection mechanisms and a convenient remote controller.
Image: The LEESKY 2000 Watt Power Inverter shown with its included accessories, including battery cables, remote controller, and digital display unit.
Safety Information
Read all safety warnings and instructions carefully before operating the inverter. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Grounding: Always ensure the inverter is properly grounded using the provided earth wire to prevent electrical hazards.
- Ventilation: Operate the inverter in a well-ventilated area. Do not block the cooling fans or vents.
- Protection Features: The inverter is equipped with 7 protection mechanisms, including overload, overvoltage, low-voltage, overheat, input/output isolated protection, and reverse polarity protection. It also has built-in 6*35A UL fuses for device safety.
- Battery Compatibility: This inverter is designed for 12V DC systems and is compatible with lithium batteries. Ensure your battery system matches the inverter's input voltage.
- Load Capacity: Do not exceed the inverter's continuous power rating of 2000 watts. Overloading can trigger protection modes and potentially damage the unit or connected appliances.
Image: Visual representation of the inverter's protection functions, including overload, over-voltage, over-heat, and low-voltage protection.
Image: Close-up view of the built-in UL fuses, highlighting a key safety feature of the inverter.
What's in the Box
Your LEESKY 2000 Watt Power Inverter package includes the following components:
- LEESKY 2000 Watt Power Inverter Unit
- 15ft Wired Remote Controller
- 2ft Battery Cables (Positive and Negative)
- Earth Wire
- 8 Shockproof Pads
Product Overview
Familiarize yourself with the various components and features of your power inverter.
Image: Detailed diagram showing the front panel with AC sockets, USB port, LED display, and power switch, and the rear panel with battery terminals and cooling fans.
Key Features:
- Dual AC Sockets: Two 110-120V AC outlets for connecting household appliances.
- 2.4A USB Port: For charging USB-powered devices like smartphones and tablets.
- LED Display: Provides real-time information on input voltage, output wattage, and protection codes.
- Remote Controller: A 15ft wired remote for convenient power control and status monitoring from a distance.
- Intelligent Cooling Fans: Automatically activate when the inverter's temperature reaches 104°F (40°C) or when the load exceeds 40% of the rated power, ensuring optimal performance and longevity.
- Pure Copper Terminals: Ensures efficient and secure electrical connections.
Image: Close-up of the pure copper terminal, indicating high-quality connection points.
Setup
Follow these steps to properly set up your LEESKY Power Inverter:
- Placement: Choose a dry, well-ventilated location for the inverter, away from direct sunlight, heat sources, and flammable materials. Ensure adequate space around the unit for airflow.
- Mounting (Optional): Use the provided shockproof pads if mounting the inverter to a surface to reduce vibration.
- Grounding Connection: Connect one end of the earth wire to the grounding terminal on the inverter. Connect the other end to a reliable earth ground point (e.g., vehicle chassis, ground rod).
Image: Illustration of connecting the grounding wire to the inverter's grounding terminal.
- Battery Connection:
- Ensure the inverter's power switch is in the OFF position.
- Connect the red (positive) battery cable to the positive (+) terminal on the inverter.
- Connect the black (negative) battery cable to the negative (-) terminal on the inverter.
- Connect the other end of the red (positive) battery cable to the positive (+) terminal of your 12V battery.
- Connect the other end of the black (negative) battery cable to the negative (-) terminal of your 12V battery.
- Ensure all connections are tight and secure to prevent arcing and overheating.
- Remote Controller Connection: Plug the RJ10 connector of the 15ft wired remote controller into the designated port on the inverter. This allows for convenient remote operation.
Image: The remote control unit with its 15ft cable and RJ10 plug, demonstrating its connection to the inverter.
Image: A standalone view of the 15ft remote controller, emphasizing its length and convenience.
Operating Instructions
Once the inverter is properly set up, follow these steps to operate it:
- Powering On: Long press the power switch on the inverter unit or the remote controller for over 0.5 seconds to turn the inverter ON. The LED display will illuminate, showing input voltage and output wattage. The remote controller will show a green 'POWER' indicator.
- Connecting Appliances: Plug your 110-120V AC appliances into the dual AC sockets on the inverter. For USB charging, connect your device to the 2.4A USB port.
- Monitoring: Observe the LED display for real-time input voltage and output wattage. If a protection mode is triggered, a corresponding code will appear (see Troubleshooting section).
- Powering Off: Long press the power switch on the inverter or the remote controller for over 0.5 seconds to turn the inverter OFF.
Note: If the remote controller is not connected, the inverter can still be operated directly using the power switch on the main unit.
Image: An illustration depicting the inverter providing power to various household appliances during a power outage, such as a coffee maker and hairdryer.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your inverter.
- Cleaning: Periodically clean the exterior of the inverter with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Fan Vents: Ensure the cooling fan vents are free from dust and debris to maintain proper airflow. The intelligent cooling fans will automatically activate when needed.
- Connections: Regularly check all cable connections (battery and grounding) to ensure they remain tight and free from corrosion.
- Storage: When not in use for extended periods, store the inverter in a cool, dry place, disconnected from the battery.
Image: Depiction of the inverter's dual cooling fans, illustrating their function in maintaining optimal temperature in various conditions.
Image: A close-up of the inverter's cooling fan, emphasizing its quiet operation.
Troubleshooting
The inverter's LED display provides protection codes to help diagnose issues. When a protection is triggered, the inverter will beep and display a code.
| Code | Description | Possible Cause / Solution |
|---|---|---|
| HI | Overvoltage Protection | Input voltage is too high. Check battery voltage; ensure it is within the 12V DC range. |
| OH | Overheat Protection | Inverter is too hot. Ensure proper ventilation, clear fan vents, reduce load, or allow to cool down. |
| OL | Overload Protection / Short-circuit Protection | Connected load exceeds inverter's capacity or there is a short circuit. Disconnect appliances, check for short circuits, and reduce total wattage of connected devices. |
| LO | Low-voltage Protection | Input voltage is too low. Recharge or replace the battery. |
| Fault Indicator (Remote) | General Fault | Check the LED display on the main unit for specific error codes. Review all connections. |
If the issue persists after attempting the suggested solutions, please contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Continuous Power | 2000 Watts |
| Input Voltage | 12V DC |
| Output Voltage | 110V - 120V AC |
| USB Output | 5V DC, 2.4A |
| AC Sockets | Dual Outlets |
| Fuses | 6 x 35A Built-in UL Fuses |
| Remote Controller Cable Length | 15 feet |
| Battery Cable Length | 2 feet |
| Product Dimensions (L x W x H) | 15.88 x 9.4 x 3.8 inches |
| Item Weight | 8.82 pounds |
| Model Number | 6f3780b0-e1fe-4b2e-921e-2a69fa20a05d |
Image: Diagram illustrating the physical dimensions and weight of the inverter unit, along with details on battery cables.
Warranty and Support
LEESKY provides an 18-month warranty for this 2000 Watt Power Inverter, covering manufacturing defects and workmanship. We also offer lifetime technical support to ensure your satisfaction.
For warranty claims, technical assistance, or any questions regarding your product, please contact LEESKY customer service through the retailer's platform or visit the official LEESKY store page.
LEESKY Store: https://www.amazon.com/stores/Leesky/page/5C434283-04F9-4E4D-AC71-40E6EE964E75
