1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ESSEBAGNO Luisa 3-Piece Shower Set. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for domestic bathroom use.
2. Product Components
The ESSEBAGNO Luisa 3-Piece Shower Set includes the following components:
- Hand Shower: Round stainless steel hand shower with anti-limescale nozzles for easy cleaning.
- Flexible Hose: 150 cm double-crimped flexible hose in gunmetal grey finish.
- Wall Bracket: Minimalist wall support for the hand shower, in gunmetal grey finish.
- Connection Hoses: Two 35 cm braided stainless steel connection hoses.
Image 2.1: All components of the ESSEBAGNO Luisa 3-piece shower set, including the hand shower, flexible hose, and wall bracket, laid out on a wooden surface.
3. Safety Information
- Ensure water supply is turned off before beginning installation.
- Use appropriate tools and protective equipment during installation.
- If you are unsure about any step, consult a qualified plumber.
- Do not overtighten connections, as this may damage components.
- Regularly check for leaks after installation and during use.
4. Setup and Installation
The ESSEBAGNO Luisa shower set features an ESSEFIX system for easy, tool-free fixing. Follow these steps for installation:
- Prepare the Installation Area: Ensure the wall surface is clean and suitable for mounting. Mark the desired position for the wall bracket.
- Mount the Wall Bracket: Secure the minimalist wall bracket to the wall using appropriate fasteners (not included, choose based on wall type). The ESSEFIX system simplifies this process.
- Connect the Flexible Hose: Attach one end of the 150 cm flexible hose to the water outlet on your shower mixer or wall connection. Ensure a tight, leak-free seal.
- Attach the Hand Shower: Connect the other end of the flexible hose to the hand shower. Hand-tighten first, then use a wrench if necessary, being careful not to overtighten.
- Install Connection Hoses (if applicable): If connecting to a new mixer, use the included 35 cm braided stainless steel connection hoses to link the mixer to your water supply lines.
- Place Hand Shower in Bracket: Insert the hand shower into the wall bracket.
- Test for Leaks: Turn on the water supply and check all connections for any leaks. Tighten gently if necessary.
Image 4.1: Technical drawing illustrating the dimensions of the ESSEBAGNO Luisa hand shower, flexible hose, and wall bracket for installation planning.
Image 4.2: The ESSEBAGNO Luisa 3-piece shower set, featuring the hand shower and wall bracket, professionally installed on a tiled bathroom wall.
5. Operating Instructions
To operate your ESSEBAGNO Luisa shower set:
- Ensure the water supply to your shower mixer is open.
- Adjust the water temperature and flow using your shower mixer's controls.
- Remove the hand shower from its wall bracket.
- Direct the water flow as desired.
- After use, turn off the water supply at the mixer and return the hand shower to its bracket.
6. Maintenance and Cleaning
To ensure the longevity and optimal performance of your shower set:
- Regular Cleaning: Clean the surfaces of the hand shower, hose, and wall bracket regularly with a soft cloth and mild soap. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the gunmetal grey finish.
- Anti-Limescale Nozzles: The hand shower features anti-limescale rubber nozzles. To remove limescale buildup, gently rub the nozzles with your finger or a soft brush.
- Hose Inspection: Periodically check the flexible hose for any signs of wear, kinks, or damage. Replace if necessary.
- Connection Check: Occasionally inspect all connections for tightness and signs of leakage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water pressure from hand shower | Limescale buildup in nozzles or clogged filter. | Clean anti-limescale nozzles by rubbing them. Check and clean the filter in the hand shower connection if accessible. |
| Water leakage at connections | Loose connection or worn washer/seal. | Gently tighten the connection. If leakage persists, replace the washer or seal. |
| Hand shower not staying in bracket | Bracket worn or incorrectly installed. | Ensure the bracket is securely fastened to the wall. If worn, consider replacing the bracket. |
8. Specifications
- Brand: ESSEBAGNO
- Model Number: 9024068
- Color: Gunmetal Grey
- Material: Brass (main components), Stainless Steel (hose, connection hoses)
- Number of Handles: 1 (for hand shower operation, not mixer)
- Handle Material: Metal
- Mounting Profile: Wall Mount
- Finish: Painted
- Hose Length: 150 cm
- Connection Hoses: 35 cm braided stainless steel
- Certifications: ACS (Sanitary Conformity Accreditation)
9. Support
For further assistance or inquiries regarding your ESSEBAGNO Luisa 3-Piece Shower Set, please contact ESSEBAGNO customer support through their official website or your retailer. Please have your model number (9024068) and purchase information ready when contacting support.
