iSpring WGB32B-KDS 3-Stage Whole House Water Filter System Instruction Manual

1. Product Overview

The iSpring WGB32B-KDS is a heavy-duty 3-stage whole house water filtration system designed to provide clean and refreshing filtered water throughout your home. This system effectively reduces lead, scale, chlorine, chloramine, heavy metals, hydrogen sulfide, and other contaminants, ensuring improved water quality for various household uses.

The filtration process involves three stages:

1. Stage 1: FWDS150K Anti-Scale Polyphosphate Filter - Shields pipes and appliances by sequestering calcium and magnesium, inhibiting corrosion, forming a protective layer, and stabilizing chlorine.
2. Stage 2: FG25B-KS GAC + KDF Compound Filter - Targets chlorine, chloramine, lead, mercury, hydrogen sulfide, heavy metals, and more.
3. Stage 3: FC25B Carbon Block Filter - Captures residual tastes and odors, reducing up to 99% chlorine, and ensures maximum efficiency.

The entire system filters up to 250,000 gallons, providing a year's clean water for a family of four, and meets NSF/ANSI standards.

Image 1.1: iSpring WGB32B-KDS 3-Stage Whole House Water Filter System. This image shows the complete three-stage filtration unit with its blue filter housings and black mounting bracket.

Image 1.2: Filtration Stages of iSpring WGB32B-KDS System. This diagram illustrates the three stages of filtration: Stage 1 (FWDS150K Anti-Scale Polyphosphate Filter) addresses scale and corrosion; Stage 2 (FG25B-KS GAC + KDF Filter) removes colors, taste, mercury, lead, heavy metals, odors, cloudiness, and chlorine; Stage 3 (FC25B Carbon Block Filter) further reduces cloudiness, colors, chlorine, taste, and odors.

2. Safety Information

• Read all instructions and safety warnings before installation and use.
• Ensure the main water supply is shut off before beginning any installation or maintenance.
• Release water pressure from the system before opening filter housings.
• Wear appropriate personal protective equipment, such as safety glasses and gloves, during installation and maintenance.
• Do not overtighten fittings or filter housings, as this can cause cracks and leaks.
• Keep the system away from direct sunlight and freezing temperatures.
• Ensure proper drainage is available during flushing and filter replacement.

3. Parts Included & Required Tools

3.1. Parts Included

• Whole House System with Filters (FWDS150K, FG25B-KS, FC25B)
• Housing Wrench
• User Manual

3.2. Required Tools & Parts (Not Included)

• Inlet/Outlet Fittings (may vary based on pipe size)
• Plumber's Tape (Thread Seal Tape)
• Pipe Cutter
• Adjustable Wrench
• Power Drill/Driver
• Water Bucket

Image 3.1: iSpring WGB32B-KDS System Components. This image displays the main components of the system: the WGB32B-KDS unit with three blue filter housings, a black metal bracket with housing caps, three filter cartridges (F3WGB32BKDS), a housing wrench, and the user manual.

4. Setup & Installation

Before beginning installation, please carefully read the user manual to understand your system's technical aspects, limitations, and installation guidelines. Ensure all parts are included in the package and you have all required tools on hand.

4.1. Pre-Installation Checks

• Inlet/Outlet Port Sizes: The system comes in different inlet and outlet port sizes (1/2-in, 3/4-in, or 1-in). Convert fittings may be needed if you have a different size water pipe.
• Water Flow Direction: Ensure the water flow direction arrow on the machine head matches the direction of the water flow within your pipeline. If not, the housing can be reversed (see video below).
• Bypass: A water router bypass is recommended to ease future filter replacement and system maintenance.

4.2. Applying Plumber's Tape

Plumber's tape (Thread Seal Tape) is commonly used on water pipe threads to prevent leaks. Ensure the threads are clean and free from debris. Test-fit the fittings before applying any tape. Apply the plumber's tape to the fittings in the clockwise direction to thread. Apply the tape accordingly, as the tape's thickness may vary. Carefully insert and tighten the fittings with a wrench to the inlet and outlet port of your system. Do not over-tighten, as this can cause cracks and leaks.

4.3. Inserting Filter Cartridges

Unwrap all filter cartridges and insert them into the housing in the correct order. Ensure filter center holes slip over the center knob in the bottom of housings. Ensure housing o-rings are properly seated to prevent leaks.

4.4. Installation Steps

1. Bypass or shut off the main water line and open the nearest faucet to drain the water from the pipe and release any pressure.
2. Find a suitable location for the system. Measure and cut the water inlet pipe. Use a bucket to catch any remaining water from the pipe.
3. Mount the bracket of the filter system on the wall and then connect it to the pipeline. Please ensure the water flow direction arrow on the machine head matches the direction of the water flow within the pipeline.
4. Turn on the main water and put the system back in service. Ensure there are no leaks and that the filtration system is working properly.
5. Let the water run from a nearby faucet for about 10 minutes until the water is clear to flush out debris and loose filter media. Turn off the faucet when finished.

4.5. Installation Videos

5. Operating Instructions

Once installed and flushed, the iSpring WGB32B-KDS system operates continuously, providing filtered water to your entire home. No daily interaction is required beyond routine maintenance.

6. Maintenance & Filter Replacement

The system requires scheduled maintenance and filter replacement to ensure water quality and performance. Replace filters according to the manufacturer's suggested schedule or as needed, based on water quality and usage.

6.1. Filter Lifespan

• FWDS150K Anti-Scale Polyphosphate Filter: Up to 1 year or 250,000 gallons.
• FG25B-KS GAC + KDF Compound Filter: Up to 1 year or 150,000 gallons.
• FC25B Carbon Block Filter: Up to 1 year or 100,000 gallons.

6.2. Filter Replacement Steps

1. Bypass or shut off the main water line and open the nearest faucet to drain the water from the pipe and release pressure. Use the pressure release button on the system, if applicable.
2. Unscrew the filter housing clockwise using the included housing wrench. Use a bucket to catch any remaining water from the pipe.
3. Remove and dispose of the expired filter cartridges. Wearing a pair of rubber gloves and safety glasses, clean the housing and housing cap with lukewarm water mixed with two tablespoons of household bleach, using a sponge or soft cloth. Rinse thoroughly when finished.
4. Unwrap all new filter cartridges and insert them into the housing. Ensure filter center holes slip over the center knob in the bottom of housings. Apply lubricant and ensure housing o-rings are properly seated to prevent leaks.
5. Hand tighten the housings counterclockwise onto the housing caps. Using the housing wrench, tighten the housing with another quarter to half of a turn. Do not over-tighten, as this can cause leaks and make future filter replacements difficult.
6. Turn on the main water and put the system back in service. Make sure there are no leaks and that the filter system is working properly. Let the water run from a nearby faucet for about 10 minutes until the water is clear to flush out debris and loose filter media. Turn off the faucet when finished.

Image 6.1: Replacing a filter cartridge. This image shows a hand twisting a filter cartridge into a blue housing, illustrating the ease of replacement.

7. Troubleshooting

If you experience any issues with your iSpring WGB32B-KDS system, please refer to the detailed troubleshooting section in your user manual. Common issues may include leaks (check fittings and o-rings), reduced water flow (check filter lifespan and pressure), or unusual taste/odor (flush system, check filter type and lifespan).

For persistent problems, please contact iSpring Customer Support for assistance.

8. Specifications

Image 8.1: iSpring WGB32B-KDS Product Dimensions. This image shows the dimensions of the filter system: 24.5 inches in length, 8 inches in width, and 28 inches in height. It also indicates the inlet and outlet ports and the direction of water flow.

9. Warranty & Support

Activate a 1-year warranty and lifetime tech support by registering online. Our U.S. local support team is ready to promptly address any concerns, prioritizing your peace of mind.

For customer support, please visit the iSpring Store or refer to your user manual for contact information.

Image 9.1: iSpring Customer Support. This image shows a customer service representative with a headset, indicating available support for any questions or concerns.