1. Product Overview
The AGJ Restaurant Pager System BCT-6890 is a wireless queuing system designed to improve customer flow and service efficiency in various settings such as restaurants, coffee shops, food trucks, and clinics. The system includes a charging base with a keypad and multiple coaster pagers that alert customers when their service is ready.
Each pager is designed to be slim and durable, offering multiple alert modes including vibration, flash, and beep. The system provides a reliable communication range and extended working time for continuous operation.
Image: The AGJ Restaurant Pager System, featuring a black charging base with a keypad and two stacks of red coaster pagers.
2. System Components
- Charging Base: Main unit for charging pagers and sending alerts. Features a digital display and a numeric keypad.
- Coaster Pagers: Individual customer units that receive alerts. Each pager has a unique number and provides visual (flashing LED), audible (beep), and tactile (vibration) notifications.
- Power Adapter: For connecting the charging base to a power source.
Image: A close-up view of a single AGJ coaster pager, showing its circular design, red translucent casing, and a white label with instructions.
3. Setup Instructions
3.1 Initial Charging
Before first use, ensure all pagers are fully charged. Place the pagers onto the charging base. The pagers will illuminate to indicate charging status.
3.2 Pairing Pagers (Changing Pager Number)
Pagers are typically pre-paired. If you need to change a pager's number or pair new pagers, follow these steps:
- Ensure the pager is on the charging base.
- On the charging base keypad, press the 'Call' button and the 'Delete' button simultaneously. The display will show 'F1'.
- Press '2' on the keypad. The display will show 'F2'. This enters the pairing mode.
- Enter the desired new pager number (e.g., '88') on the keypad.
- Remove the pager from the charging base.
- Within 5 seconds of removing the pager, press the 'Call' button on the keypad. The pager should now display the new number and confirm pairing with a beep, flash, and/or vibration.
- Place the pager back on the charging base to save the setting.
3.3 Adjusting Pager Alert Modes (Beep, Flash, Vibrate)
The system supports various alert modes. To change the alert mode (e.g., turn off the beep):
- On the charging base keypad, press the 'Call' button and the 'Delete' button simultaneously. The display will show 'F1'.
- Press '4' on the keypad. The display will show 'F4'. This enters the alert mode setting.
- Enter '0' on the keypad to disable the beep. (Other numbers may correspond to different modes, refer to the full manual for details).
- Remove the pager from the charging base.
- Within 5 seconds of removing the pager, press the 'Call' button on the keypad. The pager will confirm the new setting.
- Place the pager back on the charging base to save the setting.
Video: Demonstrates how to change pager numbers and adjust alert modes (beep, flash, vibrate) on the AGJ BCT-6890 system.
4. Operating Instructions
4.1 Calling a Pager
To alert a customer, simply enter their pager number on the charging base keypad and press the 'Call' button. The corresponding pager will activate its set alert mode (vibration, flash, and/or beep).
4.2 Pager Indications
- Flashing: Red LED lights around the pager will flash.
- Vibration: The pager will vibrate.
- Beep: The pager will emit an audible sound.
Customers should return the pager to the service counter once alerted.
4.3 Operational Range
The system offers a working range of approximately 430 yards (300 meters) in an open area. Signal penetration may vary depending on environmental factors such as walls and obstructions.
4.4 Battery Life
Each pager provides up to 20 hours of working time on a full charge. Regular charging is recommended to ensure continuous operation.
5. Maintenance
5.1 Cleaning
Regularly clean the pagers and charging base with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the devices. Ensure the charging contacts on both the pagers and the base are clean and free of debris for optimal charging.
5.2 Charging Best Practices
- Always place pagers securely on the charging base to ensure proper contact.
- Avoid overcharging by removing pagers once fully charged if not in active use, though the system is designed to manage charging.
- Store the system in a cool, dry place when not in use.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pager not responding to call | Pager out of range, low battery, or not properly paired. | Ensure pager is within operational range. Place pager on charging base. Re-pair the pager following the instructions in Section 3.2. |
| Difficulty pairing pagers | Incorrect pairing sequence or timing. | Carefully follow the pairing steps in Section 3.2, paying close attention to the 5-second window for pressing the 'Call' button after removing the pager. |
| Pager not charging | Poor contact with charging base, dirty contacts, or faulty power adapter. | Ensure pagers are correctly seated on the charging base. Clean charging contacts on both pagers and base. Check power adapter connection. |
| Pager not beeping/vibrating/flashing | Alert mode settings are disabled. | Adjust the pager alert modes following the instructions in Section 3.3 to enable desired notifications. |
6.1 Frequently Asked Questions (FAQ)
- Can I add extra pagers to an existing system?
Yes, additional pagers can be purchased and paired with your current system. Follow the pairing instructions in Section 3.2.
7. Specifications
- Model Number: BCT-6890
- Product Dimensions: 9 x 6 x 1.4 inches
- Item Weight: 3.32 pounds
- Operational Range: Approximately 430 yards (300 meters) in open area
- Working Time (Pagers): Up to 20 hours
- Manufacturer: Wirelesslinkx
- ASIN: B0BGHH6YSG
- Date First Available: October 28, 2022
Image: A top-down view of the AGJ Restaurant Pager System charging base, showing its sleek black design and numeric keypad.
8. Warranty and Support
For warranty information and technical support, please contact the manufacturer, AGJ, directly. Refer to the product packaging or the official AGJ website for contact details.
