1. Introduction
Thank you for choosing Allesin Motorized Blackout Roller Shades. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new motorized blinds. Please read these instructions thoroughly before installation and keep them for future reference.
These motorized blinds offer 100% blackout capability, UV protection, and thermal insulation, enhancing privacy and energy efficiency in your home or office. They feature quiet motor operation and can be controlled via remote, app, or voice commands with optional smart hub accessories.
2. Safety Information
- Keep the remote control out of reach of children.
- Ensure all mounting hardware is securely fastened to prevent the blinds from falling.
- Do not attempt to disassemble or repair the motor or battery components yourself. Contact qualified personnel for service.
- Avoid exposing the blinds to excessive moisture or direct water contact.
- Use only the specified AA batteries for the motor. Incorrect battery types may cause damage or malfunction.
- Do not obstruct the movement of the blinds during operation.
3. Package Contents
Verify that all components are present before beginning installation:
- Motorized Blackout Roller Shade Unit
- Single-Channel Remote Control
- Mounting Brackets (2x)
- Screws and Wall Anchors
- AA Batteries (6x)
- Instruction Manual (this document)
Image: Components of the Allesin Motorized Blackout Roller Shade, showing the main unit, remote, and mounting hardware.
4. Setup
4.1. Measuring Your Window
Accurate measurements are crucial for proper fit and optimal blackout effect. Refer to the diagrams below to determine whether to use an Inside Mount or Outside Mount method.
Image: Detailed guide on measuring window dimensions for both inside and outside mounting options.
Image: Visual comparison demonstrating that outside mounting is recommended for better light blocking and overall coverage.
4.2. Battery Installation
The motorized blinds are powered by 6 AA dry batteries (included). These batteries provide up to six months of use before needing replacement.
- Roll up the blinds completely and lay them flat on a stable surface.
- Unscrew the screw on the left side of the motor with a screwdriver and gently pull out the battery box. Be careful not to pull too hard to prevent loosening the power cord connector.
- According to the battery box tips, correctly install 6 AA dry batteries, ensuring proper polarity.
- Install the battery box back into the upbeam and then install the blinds.
Video: This video demonstrates the battery installation process for the Allesin M100 series motorized roller blinds, showing how to access the battery compartment and insert the AA batteries.
4.3. Installation
Choose between Inside Mount or Outside Mount based on your window measurements and desired light blocking. Secure the mounting brackets and attach the blind unit.
- Mark the positions for the mounting brackets based on your chosen mount type (Inside or Outside).
- Drill pilot holes and secure the mounting brackets with the provided screws and wall anchors.
- Align the motorized blind unit with the installed brackets and snap it into place until it is securely seated.
- Ensure the blind operates smoothly by manually adjusting it up and down once installed.
Video: This video demonstrates the installation process for the Allesin M100 series motorized roller blinds, showing how to attach the mounting brackets and secure the blind unit.
5. Operating Instructions
5.1. Remote Control
Your Allesin motorized blinds come with a single-channel remote control for convenient operation. The remote allows you to raise, lower, and stop the blinds at any desired position.
- Up Arrow: Raises the blinds.
- Down Arrow: Lowers the blinds.
- Pause Button (||): Stops the blinds at their current position.
The remote's admin mode allows customization of travel limits and motor speed. An optional 15-channel remote (B0FHKT51RR, sold separately) is available for controlling multiple smart shades simultaneously.
Image: The included single-channel remote control for operating the blinds.
Image: Overview of remote control options and app control capabilities.
5.2. App & Voice Control (Optional)
To enable smart functionality, you will need to purchase additional Smart Hub accessories:
- USB Converter (B0BVDSX6B3, sold separately): Provides basic connectivity for single-device control via the Tuya app or Alexa.
- Smart Bridge (B0CC22FQX6, sold separately): Supports seamless control of up to 30 motorized shades simultaneously through the Tuya app, Alexa, or Google Assistant.
Once connected, you can use the respective app or voice commands (e.g., "Alexa, close the blind") to operate your shades.
Image: Voice control demonstration with an Alexa device, showing the blinds responding to commands.
6. Maintenance
6.1. Cleaning
The blackout fabric is made of polyester and should be spot cleaned only. Use a soft, damp cloth with mild soap and water to gently clean any soiled areas. Avoid harsh chemicals or abrasive cleaners.
6.2. Battery Replacement
The motor operates on 6 AA dry batteries. Under normal daily use, these batteries can last up to six months. When the motor's performance degrades or stops responding, it's time to replace the batteries. Follow the steps outlined in Section 4.2 Battery Installation for replacement.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Blinds do not respond to remote. | Dead batteries in remote or blind motor. Remote out of range. | Replace batteries in remote and/or blind motor. Ensure remote is within 20 meters of the blind. |
| Blinds stop mid-way or operate erratically. | Low battery in blind motor. Obstruction in the blind's path. | Replace batteries in the blind motor. Check for and remove any obstructions. |
| Blinds do not fully raise or lower. | Travel limits need adjustment. | Refer to the remote control's admin mode instructions to reset or adjust the upper and lower travel limits. |
| App/Voice control not working. | Smart Hub not connected or configured correctly. Bluetooth connection issue. | Ensure the USB Converter or Smart Bridge is properly installed and configured with the Tuya app. Check Bluetooth connection on your phone. |
8. Specifications
- Brand: Allesin
- Model Number: 1aee63c9-f08d-46ff-97c6-c6c78b62e566
- Material: Polyester
- Color: Gray
- Size: 23"W x 72"H
- Opacity: Blackout
- Operation Mode: Automatic
- Control Type: Remote (single-channel included), App & Voice (with optional Smart Hub)
- Power Source: 6x AA Batteries (included)
- Motor Noise Level: Below 30dB
- Mounting Type: Inside Mount (recommended for optimal blackout)
- Product Care: Spot Clean Only
9. Warranty & Support
For warranty information, technical support, or to purchase optional accessories, please visit the official Allesin website or contact Allesin customer service. Keep your purchase receipt as proof of purchase for any warranty claims.
Allesin US Store: Visit Store