Introduction
Thank you for choosing the BEVA Power Strip Tower LS51231. This device is designed to provide multiple power outlets and USB charging ports in a compact, vertical design, while offering comprehensive protection for your electronic devices. Please read this manual carefully before use to ensure safe and optimal operation.
Safety Instructions
- Do not exceed the maximum load of 1625W/13A.
- This device is for indoor use only. Avoid exposure to moisture or wet environments.
- Do not disassemble or modify the power strip. Refer servicing to qualified personnel.
- Keep away from children and pets.
- Ensure the power plug is fully inserted into the wall outlet.
- Do not use with appliances that require more power than the unit can provide.
- The built-in circuit breaker will automatically cut power in case of overcurrent, overcharge, short-circuit, or overheating. If this occurs, unplug devices, reset the switch, and then reconnect.
Product Features
- 12 AC Outlets: Strategically placed on four sides to accommodate multiple large plugs without blocking adjacent outlets.
- 4 USB Ports: Includes 3 USB-A ports (5V/2.4A max output per port) and 1 USB-C port (5V/3A max output). Total USB output is 5V/3.4A.
- 10 FT Extension Cord: Heavy-duty 16AWG 100% pure copper wire for better heat dissipation and conductivity.
- 45° Right Angle Flat Plug: Designed to fit snugly behind furniture without blocking the bottom wall socket.
- 700J Surge Protection: Protects electronic devices against voltage fluctuations, lightning, spikes, and surges.
- Built-in Circuit Breaker: Automatic power cut-off for overcurrent, overcharge, short-circuit, and overheating protection.
- Fireproof Material: Constructed from ABS+PC fireproof material with a temperature resistance up to 1382°F (750°C).
- Vertical Space-Saving Design: Reduces desktop clutter and allows for efficient use of space.
- Anti-Slip Rubber Feet: Four rubber feet on the base ensure stability.
Setup
- Unpack the Device: Carefully remove the BEVA Power Strip Tower from its packaging.
- Position the Tower: Place the tower on a stable, flat surface where you intend to use it. The vertical design is ideal for desktops, offices, kitchens, bedrooms, or dorm rooms to save space.
- Connect to Power: Plug the 45° right angle flat plug of the 10ft extension cord into a standard wall outlet. The flat design allows furniture to be placed closer to the wall.
- Verify Protection: Once plugged in, check for the green "PROTECTED" indicator lights on the base of the tower. These lights confirm that the surge protection is active.
Image: The 10ft extension cord with a 45-degree right-angle flat plug, designed for convenient placement behind furniture.
Operating Instructions
- Power On/Off: Use the master ON/OFF switch located on the base of the tower to control power to all AC outlets and USB ports. Press the switch to the 'ON' position to supply power and to 'OFF' to cut power. This switch also functions as a circuit breaker.
- Connecting AC Devices: Plug your AC-powered devices into any of the 12 widely spaced AC outlets located on the sides of the tower. The generous spacing prevents large adapters from blocking adjacent outlets.
- Charging USB Devices: Connect your USB-powered devices (smartphones, tablets, smartwatches, etc.) to the 3 USB-A ports or the 1 USB-C port on the top of the tower.
- Monitoring Protection: The green "PROTECTED" indicator lights on the base will remain lit when the surge protection is active and functioning correctly.
Image: The BEVA Power Strip Tower with 12 AC outlets and 4 USB ports (3 USB-A, 1 USB-C) for multiple device connections.
Video: An overview of the BEVA Power Strip Tower, demonstrating its features and compact design.
Maintenance
- Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
- Storage: When not in use for extended periods, unplug the power strip and store it in a cool, dry place away from direct sunlight and moisture.
- Cable Management: Keep the extension cord untangled and free from kinks to prevent damage. Avoid placing heavy objects on the cord.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to outlets/USB ports | Power switch is OFF or circuit breaker tripped. | Ensure the power switch is ON. If tripped, unplug devices, reset the switch, then reconnect. |
| "PROTECTED" indicator lights are off | Surge protection is no longer active or unit is not receiving power. | Check if the unit is plugged in and the power switch is ON. If lights remain off, the surge protection may have expired after a significant surge. Consider replacing the unit. |
| Devices not charging via USB | Faulty USB cable or device, or total USB output exceeded. | Try a different USB cable or device. Ensure total USB output (5V/3.4A) is not exceeded. |
Specifications
- Model Number: LS51231
- Product Dimensions: 3.94 x 3.94 x 6.34 inches
- Item Weight: 11 ounces
- Total Power Outlets: 12 AC outlets
- USB Ports: 3 USB-A, 1 USB-C
- USB-A Output: 5V/2.4A Max per port
- USB-C Output: 5V/3A Max
- Total USB Output: 5V/3.4A
- Voltage: 100V-250V
- Rated Current: 13A
- Rated Power: 1625W
- Extension Cord Length: 10 FT (16AWG)
- Surge Protection: 700 Joules
- Material: ABS+PC Fireproof Material
- Special Features: On/Off Switch, Surge Protection, USB Slots, Circuit Breaker, Anti-Slip Feet, 45° Flat Plug
Image: Detailed view of the BEVA Power Strip Tower, highlighting its dimensions and anti-slip rubber feet for stability.
Warranty and Support
For warranty information, technical support, or any inquiries regarding your BEVA Power Strip Tower LS51231, please refer to the manufacturer's official website or contact their customer service directly. Contact details are typically provided on the product packaging or the manufacturer's website.