Sona 7-Piece Refrigerator Accessory Set Instruction Manual

Introduction

This manual provides instructions for the proper use and care of your Sona 7-Piece Refrigerator Accessory Set. This set is designed to protect your refrigerator surfaces and enhance organization. Please read these instructions carefully before use.

Package Contents

Your Sona Refrigerator Accessory Set includes the following items:

• 1 x Refrigerator Top Cover (Blue Jungle pattern)
• 2 x Refrigerator Handle Covers (Blue Jungle pattern)
• 4 x Refrigerator Mats (Green)

Figure 1: Complete Sona 7-Piece Refrigerator Accessory Set. This image displays all components of the set: one patterned top cover for the refrigerator, two matching handle covers, and four plain green mats for shelves.

Setup and Installation

Follow these steps to properly install your refrigerator accessories:

1. Refrigerator Top Cover:

   Place the refrigerator top cover flat on the top surface of your refrigerator. Ensure it is centered and the pockets (if present) hang evenly on the sides. The dimensions of the top cover are approximately 39 x 21.5 inches, designed to fit most standard refrigerators.

   

   Figure 2: Refrigerator Top Cover in position. This image shows the patterned top cover draped over the top of a gray refrigerator, with side pockets visible.

2. Refrigerator Handle Covers:

   Wrap each handle cover around the refrigerator door handles. Secure them using the attached fasteners (e.g., Velcro). The handle covers measure approximately 14 x 6 inches.

   

   Figure 3: Refrigerator Handle Cover. This image displays one handle cover, showing its blue jungle pattern and the fastening mechanism.
3. Refrigerator Mats:

   Place the green refrigerator mats on the shelves inside your refrigerator. These mats are designed to protect shelves from spills and provide a clean surface. Each mat measures approximately 11.5 x 17.5 inches.

   

   Figure 4: Refrigerator Mats on shelves. This image shows the interior of a refrigerator with multiple green mats laid out on the shelves.

Operating Instructions

The Sona Refrigerator Accessory Set is designed for passive protection and aesthetic enhancement. Once installed, no further operational steps are required. The mats provide a non-slip surface for items on shelves and help contain minor spills, while the covers protect the exterior surfaces from dust and scratches.

Maintenance and Care

To ensure the longevity and cleanliness of your Sona Refrigerator Accessory Set, follow these care instructions:

• Cleaning: All components of the set are easy to clean.
  • For the top cover and handle covers (Polyester & PVC material), gentle hand washing with mild detergent is recommended. Air dry thoroughly.
  • For the refrigerator mats (PVC material), wipe clean with a damp cloth and mild soap. Rinse and air dry.
• Stain Removal: Address spills and stains promptly to prevent permanent marks.
• Avoid Harsh Chemicals: Do not use bleach or abrasive cleaners, as these can damage the material and color.

Troubleshooting

Here are solutions to common concerns:

• Cover or Mats Slipping: Ensure the surfaces are clean and dry before placement. The mats are designed to be somewhat non-slip, but heavy items or excessive moisture can cause movement.
• Wrinkles in Covers: If the covers have wrinkles from packaging, gently iron on a low setting (for fabric parts only, avoid direct heat on PVC) or allow them to hang for a few days to relax.
• Odor from New Mats: New PVC mats may have a slight odor. This is normal and will dissipate after airing them out for a few hours before placing them in the refrigerator.

Specifications

Total Item Weight: Approximately 300 g

Manufacturer: SHIV BHOLA

Warranty and Support

This product is designed for durability and ease of use. For any manufacturing defects or support inquiries, please contact the retailer or manufacturer directly. Please retain your purchase receipt for warranty claims, if applicable.