1. Introduction and How to Use This Manual
This ETAI RTA 856 manual serves as a detailed technical reference for the Peugeot 3008 II Phase 1, specifically models equipped with the 1.2i 130CH PureTech engine, produced from June 2016 to November 2020. It is designed for both professional technicians and informed enthusiasts seeking to perform maintenance, repair, and diagnostic procedures.
The manual is structured into logical sections, each addressing specific vehicle systems or components. To effectively use this manual, familiarize yourself with the main sections listed below. Always refer to the 'Warnings and Precautions' section before commencing any work.
1.1. Foreword
Provides an overview of the manual's scope and purpose, emphasizing its role as a comprehensive technical resource.
1.2. Usage Notice
Details how to navigate the manual, interpret diagrams, and understand technical specifications. It explains the conventions used throughout the document.
1.3. Warnings and Precautions
Crucial information regarding safety procedures, potential hazards, and necessary precautions to ensure safe and effective repair work. Always read this section thoroughly before starting any task.
2. Product Overview
The RTA 856 manual is a comprehensive book detailing the technical aspects of the specified Peugeot 3008 II models. It includes diagrams, step-by-step instructions, and technical data.
Figure 1: Front cover of the ETAI RTA 856 manual. This image displays a white Peugeot 3008 II and highlights the key sections covered within the manual, such as 'Carnet de Bord' (Logbook), 'Entretien Courant' (Current Maintenance), and 'Mécanique Moteur' (Engine Mechanics).
Figure 2: Inside page providing a summary of vehicle models covered by the manual. It lists specific 1.2i 130CH engine codes (HNS/HNOS, HNW/HNO3, HNY/HNO2) and indicates which major sections are relevant for each, using a dot system.
3. Logbook and Identification
3.1. Identification
This section provides details on vehicle identification numbers (VIN), engine codes, and other crucial identifiers necessary for correct part selection and service procedures.
4. Maintenance Procedures
4.1. Current Maintenance
- Maintenance Recommendations (HNV, HNS 6v-TEMP): Specific service intervals and tasks for different engine variants.
- Level Checks - Visibility: Instructions for checking fluid levels (oil, coolant, brake fluid, washer fluid) and inspecting visibility components (wipers, lights).
- Tire and Brake Checks: Procedures for inspecting tire pressure, tread depth, and brake system components.
- Electrical Supply and Reset: Guidance on battery maintenance, electrical system checks, and resetting service indicators.
- Filtration and Engine Maintenance: Steps for replacing air filters, fuel filters, and performing basic engine servicing.
4.2. Advanced Maintenance
- Drain - Fill - Bleed: Detailed procedures for fluid changes (e.g., engine oil, gearbox oil, coolant) and bleeding systems.
- Charging - Starting: Advanced diagnostics and repair for the charging and starting systems.
- Brake Maintenance: Comprehensive guide to brake system overhaul, including disc and pad replacement, and hydraulic system servicing.
- Suspension Replacement: Instructions for replacing suspension components such as shock absorbers and springs.
5. Exterior Lighting
- Front Exterior Lighting: Procedures for inspecting, adjusting, and replacing front headlights, fog lights, and turn signals.
- Rear Exterior Lighting: Instructions for servicing rear lights, brake lights, reverse lights, and license plate illumination.
6. Bodywork and Glazing
- Front Section: Repair and removal procedures for front bumper, grille, and associated components.
- General Section: Information on general body structure, panel alignment, and corrosion prevention.
- Passenger Compartment: Details on interior trim, dashboard removal, and component access.
- Windows and Window Regulator Mechanism: Repair and replacement of windows and their operating mechanisms.
- Opening Element Locking: Servicing of door locks, boot lock, and fuel flap mechanisms.
- Rear Section: Procedures for rear bumper, tailgate, and associated body components.
7. Engine Mechanics
- Engine: Comprehensive guide to engine removal, disassembly, inspection, and reassembly.
- Timing System: Detailed instructions for timing belt/chain replacement and adjustment.
- Cylinder Head: Procedures for cylinder head removal, inspection, and reinstallation.
- Lubrication: Information on the engine lubrication system, oil pump, and oil cooler.
- Cooling: Servicing of the cooling system, radiator, water pump, and thermostat.
- Fuel Supply: Details on the fuel injection system, fuel pump, and injectors.
- Air Supply: Maintenance of the air intake system, turbocharger, and intercooler.
- Exhaust: Repair and replacement of exhaust system components, including catalytic converter and particulate filter.
8. General Mechanics
- Clutch (MCH, MBB, AT6/ATNB): Procedures for clutch system inspection, removal, and replacement for various gearbox types.
- Gearbox (MCH, MBB, AT6, ATNB): Detailed instructions for manual and automatic gearbox servicing, removal, and installation.
- Transmission: Maintenance and repair of drive shafts and associated components.
- Running Gear: Servicing of axles, wheel bearings, and suspension linkages.
- Airbags - Steering: Information on the steering system, power steering, and airbag system components.
- Heating - Air Conditioning: Diagnostics and repair of the climate control system.
9. Troubleshooting and Diagnostics
9.1. Troubleshooting (General)
This section provides general troubleshooting guides for common vehicle issues, helping to identify potential causes and solutions.
9.2. Engine Diagnostics
- Energy Management: Diagnostics for the vehicle's electrical energy management system.
- Engine Management (HNY and HNW): Specific diagnostic procedures for engine management systems corresponding to HNY and HNW engine codes.
- Engine Management (HNS): Specific diagnostic procedures for engine management systems corresponding to the HNS engine code.
Figure 3: Detailed table of contents from the RTA 856 manual. This image provides a comprehensive list of topics covered under each main section, including page numbers for quick reference. It outlines the depth of coverage for engine mechanics, general mechanics, and diagnostic procedures.
10. Specifications
This manual contains detailed technical specifications for the Peugeot 3008 II Phase 1 1.2i 130CH PureTech models, including torque settings, fluid capacities, electrical diagrams, and component dimensions.
- Publisher: ETAI
- Publication Date: January 28, 2021
- Language: French (Original Edition)
- ISBN-13: 979-1028308452
- Item Weight: 1.08 pounds (approx. 0.49 kg)
- Dimensions: 10.63 x 0.39 x 8.27 inches (approx. 27 x 1 x 21 cm)
11. Support
For any questions regarding the content of this technical review manual or for customer service, please contact the publisher directly.
- Email Support: contact@revue-technique-auto.fr
- ISBN Reference: 9791028308452