E-flite Wing Tip Rails Instruction Manual

Safety Information

WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. The product manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

Product Overview

The E-flite Wing Tip Rails are designed as an accessory for the F-16 Thunderbirds 80mm EDF model aircraft. These rails are precision-engineered to integrate seamlessly with the aircraft's design, enhancing its appearance and potentially offering additional functionality or protection depending on their specific application.

This image displays two E-flite Wing Tip Rails, designed for the F-16 Thunderbirds 80mm EDF model. The rails are light grey, elongated, and feature small attachment points on their upper surface, indicating their purpose as external accessories for the aircraft's wings.

Setup

These wing tip rails are designed for straightforward installation on compatible E-flite F-16 Thunderbirds 80mm EDF models. Ensure the aircraft is powered off and secured before beginning installation. Carefully align the rails with the designated mounting points on the wingtips. Use appropriate adhesive or fasteners as specified in your aircraft's primary instruction manual to secure the rails firmly. Verify that the rails are symmetrically attached and do not impede any control surfaces or other aircraft components.

Operating

Once installed, the wing tip rails become an integral part of your F-16 Thunderbirds 80mm EDF model. No specific operational steps are required for the rails themselves. Always perform a pre-flight check to ensure the rails are securely attached and do not affect the aircraft's balance or aerodynamics. Operate your model aircraft according to the instructions provided in its main user manual, taking into account any minor changes in flight characteristics due to the added components.

Maintenance

Regularly inspect the wing tip rails for any signs of damage, cracks, or loose connections, especially after flights. Clean the rails with a soft, dry cloth to remove dirt or debris. If any damage is observed, replace the affected rail immediately to maintain the structural integrity and flight performance of your model aircraft. Store the rails and the aircraft in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

• Rails not fitting correctly: Ensure you have the correct model of wing tip rails for your specific F-16 Thunderbirds 80mm EDF. Refer to the product specifications and your aircraft's manual.
• Rails becoming loose during flight: Re-check the adhesive or fasteners used for installation. Ensure the mounting surface is clean and dry before application. Consider using a stronger, hobby-grade adhesive if necessary.
• Visible damage to rails: If the rails are cracked or broken, they must be replaced. Do not attempt to repair damaged rails as this may compromise flight safety.

Specifications

Warranty and Support

For warranty information and technical support, please refer to the documentation included with your primary E-flite F-16 Thunderbirds 80mm EDF model aircraft or visit the official E-flite website. Horizon Hobby, LLC provides support for E-flite products. Keep your proof of purchase for any warranty claims.