Instruction Manual

1. Product Overview

The Lamshaw Smart Watch Screen Protector is a full coverage TPU clear film designed to protect your Tamispit Q9 PRO Smart Watch or Q9 Pro Smart Watch screen from scratches, shatters, and daily wear. This soft protector maintains high transparency and touch sensitivity, ensuring optimal user experience while providing robust protection.

Image 1: Lamshaw Smart Watch Screen Protector alongside a compatible smart watch, illustrating the product's purpose.

2. What's Included

Your package includes the following items:

• 6 x Tamispit Q9 PRO Smart Watch / Q9 Pro Smart Watch film
• Cleaning wipes (wet and dry)
• Fiber cloth
• Squeegee card for installation

3. Installation Instructions (Setup)

Follow these steps carefully for optimal installation and to ensure bubble-free application. Ensure your watch model number is compatible before proceeding.

1. Clean the Screen: Use the provided wet paper to clean the watch screen thoroughly. Follow with the dry paper to remove any moisture. Finally, use the fiber cloth to polish the display and remove any remaining dust or smudges.
   

   Image 2: The first step of installation, showing the watch screen being cleaned with a wet wipe, then dried, and finally polished with a fiber cloth.

2. Prepare the Protector: The screen protector has three layers. Carefully peel off the Red "Back 1" layer. This exposes the adhesive side of the actual screen protector.
   

   Image 3: A diagram illustrating the three layers of the screen protector: a plastic film (not the protector), the TPU screen protector itself, and another plastic film.

3. Apply the Protector: Align the screen protector carefully with one edge of your watch screen. Once aligned, gently stick it to one side, ensuring it is straight.
4. Smooth and Remove Bubbles: While applying, use the provided squeegee card to push the protector from one side to the other, gradually adhering it to the screen.
   Play video

   Video 1: Official installation guide demonstrating the step-by-step process of applying the screen protector, including cleaning and smoothing techniques.

5. Final Layer Removal: Once the protector is fully adhered and smoothed, peel off the Black "Front 2" layer. The middle layer is the actual screen protector and should remain on the screen.

   Important Note: If you accidentally peel off the middle layer with "Front 2", or if the side to "Front 2" does not feel sticky, gently wrinkle the Red "Back 1" layer to separate it into two layers. Peel off the middle layer and re-attach it to the "Front 2" side before attempting installation again.

6. Address Remaining Bubbles: The protector features "bubble self-healing" properties. For any remaining small bubbles, gently push them towards the edges with the card or your finger. Larger bubbles may require careful re-lifting and re-application of that section.
   

   Image 4: Demonstrates the flexibility and self-healing capability of the TPU film, which helps in eliminating minor bubbles over time.

4. Operating (Usage)

Once properly installed, the Lamshaw Smart Watch Screen Protector provides continuous protection for your device. Its high transparency ensures that the display's clarity is unaffected, and its high sensitivity allows for normal touch screen operation without any hindrance. The protector is designed to be anti-shatter and anti-scratch, safeguarding your watch during daily activities.

5. Maintenance

To maintain the clarity and effectiveness of your screen protector:

• Wipe the screen protector regularly with a soft, lint-free cloth to remove fingerprints and smudges.
• Avoid using harsh chemicals or abrasive materials, as these can damage the protector's surface.
• If the protector becomes severely scratched or damaged, replace it with a new one from the pack to ensure continued protection.

6. Troubleshooting

Most common issues relate to installation. Refer to the installation section and video for guidance.

• Bubbles After Installation: Small bubbles often self-heal within 24-48 hours. For larger bubbles, try gently lifting the nearest edge of the protector and re-applying while smoothing with the squeegee card.
• Protector Not Sticking: Ensure the screen is thoroughly clean and free of dust or oils before application. Verify that you have peeled off the correct protective layers (Red "Back 1" first, then Black "Front 2" after application).
• Reduced Touch Sensitivity: Ensure the protector is applied smoothly without air gaps. If issues persist, re-installation might be necessary.

7. Specifications

8. Warranty and Support

For any questions, concerns, or support regarding your Lamshaw Smart Watch Screen Protector, please contact the seller directly through the platform where the purchase was made. Please retain your proof of purchase for any warranty claims, if applicable.