Introduction
Thank you for choosing the Yaheetech Metal Bed Frame. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and efficient use of your new bed frame. Please read this manual thoroughly before assembly and retain it for future reference.
Image: The Yaheetech Metal Bed Frame, fully assembled, featuring its elegant headboard and footboard design, suitable for various bedroom decors.
Safety Information
- Always assemble the bed frame on a soft, clean surface to prevent scratches.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not exceed the maximum weight capacity of 136 kg (300 lbs).
- Keep small parts away from children during assembly to prevent choking hazards.
- Do not stand or jump on the bed frame.
- Use only the provided hardware for assembly.
- If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.
Package Contents
Before beginning assembly, verify that all components are present and undamaged. Refer to the parts list provided in your packaging. Typical components include:
- Headboard and Footboard sections
- Side Rails
- Center Support Bar(s)
- Slats
- Support Legs
- Hardware Pack (bolts, nuts, washers, Allen wrench)
Setup and Assembly
Follow these steps carefully for proper assembly. It is recommended to have two people for assembly.
Step 1: Identify Components
Unpack all parts and lay them out on a clean, soft surface. Identify each component according to the parts list in your package. Familiarize yourself with the headboard, footboard, side rails, and support legs.
Image: Detailed diagram illustrating the dimensions and key components of the bed frame, including headboard, footboard, and support structure.
Step 2: Attach Side Rails to Headboard and Footboard
Connect the side rails to the headboard and footboard using the provided bolts and the Allen wrench. Ensure the L-shaped plates are correctly aligned for a stable structure. Do not fully tighten bolts until all sections are connected.
Image: Close-up view demonstrating the secure fastening of bed frame components using L-shaped plates and bolts, ensuring structural integrity.
Step 3: Install Slats
Insert the metal slats into the designated notches on the side rails. Aim the metal pipe at the notch, then press firmly to secure. The built-in slats are designed to prevent your mattress from sliding.
Image: Visual guide showing how to properly install the metal slats by aligning the pipe with the notch and applying pressure to secure it in place.
Image: Illustration demonstrating the function of the built-in slats, which are designed to keep the mattress securely in position and prevent it from sliding.
Step 4: Tighten All Bolts
Once all components are in place, go back and fully tighten all bolts using the Allen wrench. Ensure the bed frame is stable and does not wobble.
Step 5: Place Mattress
Carefully place your 90 x 190 cm mattress onto the assembled bed frame. The optimal depth of the frame ensures the mattress fits snugly and does not shift.
Operating Instructions
The Yaheetech Metal Bed Frame is designed for supporting a single mattress (90 x 190 cm) and providing a stable sleeping surface. Its high headboard allows for comfortable back support when sitting up in bed for reading or watching television. The 32.5 cm clearance under the bed provides ample space for storage, accommodating boxes, luggage, or other items.
Image: A visual representation of the generous under-bed storage space, highlighting the 32.5 cm clearance suitable for various storage solutions like baskets.
Maintenance
- Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as they may damage the finish.
- Inspection: Periodically inspect all bolts and connections to ensure they remain tight. Re-tighten any loose hardware to maintain stability and safety.
- Floor Protection: The bed frame is equipped with bottom rubber caps to protect your floor from scratches. Ensure these caps are intact and in place.
Image: A multi-panel image showcasing key features: the elegant headboard, durable metal tubes, ample under-bed storage, and protective rubber caps on the feet.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame wobbles or is unstable. | Loose bolts or uneven assembly. | Ensure all bolts are fully tightened. Check that the frame is assembled on a level surface. |
| Squeaking noises. | Loose connections or friction between metal parts. | Re-tighten all bolts. Apply a small amount of silicone spray or wax to connection points if squeaking persists. |
| Mattress slides on the frame. | Incorrect mattress size or slats not properly seated. | Ensure mattress is 90 x 190 cm. Verify all slats are securely in their notches. |
| Missing parts. | Packaging error. | Do not proceed with assembly. Contact Yaheetech customer support immediately with your purchase details. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Yaheetech |
| Model Number | YA-00117392 |
| Color | Black |
| Material | Metal |
| Overall Dimensions (L x W x H) | 196.5 x 96 x 88.5 cm (77.4 x 37.8 x 34.8 inches) |
| Compatible Mattress Size | 90 x 190 cm (Single) |
| Under-bed Clearance | 32.5 cm (12.8 inches) |
| Item Weight | 14.9 kg (32.8 lbs) |
| Special Features | Squeak-resistant, Light-resistant finish, High headboard, Under-bed storage |
Image: The Yaheetech Metal Bed Frame integrated into a contemporary bedroom, showcasing its sleek design and functional elegance.
Warranty and Support
Yaheetech products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Yaheetech website. If you encounter any issues or have questions not covered in this manual, please contact Yaheetech customer support:
- Website: www.yaheetech.com
- Email: Refer to your purchase documentation for specific regional support email.
- Phone: Refer to your purchase documentation for specific regional support phone number.
Please have your model number (YA-00117392) and purchase date ready when contacting support.
