1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Leeleberd 32.8ft LED Strip Lights (Model T-100). These RGB LED strip lights feature smart app control, music synchronization, and a remote control for versatile lighting options. Please read this manual thoroughly before use to ensure proper function and safety.
Image: The Leeleberd 32.8ft LED Strip Lights, showing the coiled strip, power adapter, remote control, and a smartphone displaying the control app interface. The product box is visible in the background.
2. Safety Information
- Indoor Use Only: These LED strip lights are designed for indoor use and are not waterproof. Avoid exposure to water or high humidity.
- Power Supply: Use only the provided power adapter. Do not connect the strip lights to any other power source.
- Installation Surface: Ensure the installation surface is clean, dry, and smooth to ensure proper adhesion.
- Cutting the Strip: If cutting the LED strip, only cut along the designated cut marks. Improper cutting may damage the strip.
- Ventilation: Do not cover the power adapter or controller during operation to prevent overheating.
- Children and Pets: Keep the product out of reach of children and pets.
- Disposal: Dispose of the product and its components according to local regulations.
3. Package Contents
Verify that all items listed below are included in your package:
- 32.8ft LED Strip Light (Model T-100)
- Power Adapter
- Control Box (Bluetooth receiver)
- 24-Key IR Remote Control
- User Manual
4. Setup and Installation
4.1 Preparation
- Unroll the LED strip light completely before powering it on to prevent overheating.
- Clean the desired installation surface thoroughly. Ensure it is dry and free of dust or grease.
- Plan the route for your LED strip lights. Avoid sharp bends or folds that could damage the strip.
4.2 Connecting the Components
- Connect the LED strip light to the control box. Ensure the arrows on the strip connector and the control box connector align.
- Connect the power adapter to the control box.
- Plug the power adapter into a standard electrical outlet.
Image: A diagram illustrating the connection process: the power cord from the adapter connects to the control box, and the LED strip connects to the control box, with arrows indicating correct alignment for connection. A remote control is also shown.
4.3 Mounting the LED Strip
- Peel off the adhesive backing from the LED strip, starting from one end.
- Carefully press the strip onto the prepared surface, applying firm and even pressure.
- Avoid repositioning the strip multiple times, as this may weaken the adhesive.
5. App Installation and Connection
The Leeleberd LED Strip Lights can be controlled via a Bluetooth smartphone application.
- Download the App: Scan the QR code located on the white control box or search for "Keepsmile" (or the specified app name) in your smartphone's app store (App Store for iOS, Google Play Store for Android).
- Enable Bluetooth: Ensure Bluetooth is enabled on your smartphone.
- Open the App: Launch the downloaded app. It should automatically detect and connect to your LED strip lights. If not, follow the in-app instructions to add a device.
Image: Multiple smartphone screens displaying various functions of the LED strip light control app, including color selection, music sync, scene modes, and a timer function. A QR code is also shown for app download.
6. Operating Instructions
6.1 Remote Control Operation
The included 24-key IR remote control allows for basic functions.
- Power On/Off: Press the ON/OFF button.
- Brightness Adjustment: Use the Brightness Up/Down buttons.
- Color Selection: Select from preset colors using the color buttons.
- Mode Selection: Choose from various dynamic modes (e.g., Flash, Strobe, Fade, Smooth) using the mode buttons.
Image: A bedroom illuminated by Leeleberd LED strip lights, showcasing various colors. A hand holds the remote control, highlighting its use for color adjustment and mode selection.
6.2 App Control Operation
The smartphone app offers advanced control features:
- Color Palette: Select from 16 million colors using the color wheel.
- Brightness & Saturation: Adjust brightness and color saturation.
- Music Sync Mode: The lights will change color and rhythm with music played through your phone's microphone or selected music files.
- Scene Modes: Choose from 64 pre-programmed scene modes for different atmospheres.
- Timer Function: Set schedules for the lights to turn on/off automatically at specific times.
- DIY Mode: Create and save custom color sequences and patterns.
Image: A modern living room with Leeleberd LED strip lights installed along the ceiling and under furniture, creating a vibrant ambiance. A smartphone in the foreground shows the app interface with options for custom colors, music sync, scenario mode, and timer mode.
6.3 Music Sync Feature
Activate the Music Sync mode via the app. The lights will respond to sound, creating a dynamic visual experience. This feature is ideal for enhancing parties or creating an immersive entertainment environment.
Image: A couple dancing in a room with Leeleberd LED strip lights illuminating the walls in vibrant colors, synchronized to music. A smartphone displays a music player interface.
7. Maintenance
- Cleaning: Gently wipe the LED strip with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Adhesion: If the strip begins to peel, reinforce it with additional adhesive clips (not included) or a strong, non-damaging adhesive.
- Storage: If removing the lights for storage, carefully peel them off the surface and coil them loosely. Store in a dry, cool place.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. |
|
|
| Remote control not working. |
|
|
| App cannot connect to lights. |
|
|
| Lights are dim or flickering. |
|
|
9. Specifications
| Model Number | T-100 |
| Brand | Leeleberd |
| Length | 32.8 feet (10 meters) |
| Light Type | LED (RGB) |
| Control Method | Bluetooth App, IR Remote Control |
| Power Source | Corded Electric |
| Indoor/Outdoor Use | Indoor Only |
| Special Features | Color Changing, Music Sync, Timer Function, DIY Mode, Multiple Scene Options |
| Material | Vinyl |
| Item Weight | 7.1 ounces (approx. 0.44 lbs) |
10. Warranty and Support
Leeleberd products are designed for reliability and performance. For specific warranty details, please refer to the documentation included with your purchase or contact Leeleberd customer support.
If you encounter any issues or have questions regarding your LED strip lights, please contact our customer support team for assistance. Contact information can typically be found on the product packaging or the official Leeleberd website.
