Redragon M693
Redragon M693 Wireless Gaming Mouse User Manual
Model: M693 | Brand: Redragon
Introduction
The Redragon M693 Wireless Gaming Mouse offers versatile connectivity and high-performance features designed for an optimal gaming and work experience. It supports three connection modes: Bluetooth, 2.4GHz wireless via a nano receiver, and wired USB-C. With a maximum 8000 DPI adjustable sensor, 7 programmable macro buttons, and customizable RGB lighting, this mouse provides precision, comfort, and personalization.
Figure 1: Redragon M693 Wireless Gaming Mouse with its USB dongle.
Package Contents
- Redragon M693 Wireless Gaming Mouse
- USB-C Charging Cable
- 2.4GHz USB Nano Receiver
- User Manual (this document)
Figure 2: Key features of the Redragon M693 mouse including tri-mode connection and 7 macro buttons.
Setup
1. Charging the Mouse
The Redragon M693 mouse is equipped with a 700 mAh rechargeable battery. Before first use, it is recommended to fully charge the mouse. Connect the supplied USB-C charging cable to the mouse's charging port and the other end to a standard USB port on your computer or a low-power USB charger. Avoid using fast-charging adapters, as this may damage the battery or prevent it from holding a charge effectively.
A full charge can provide up to 60 hours of use in eco-mode (RGB lighting off).
2. Connection Modes
The M693 supports three distinct connection modes: 2.4GHz Wireless, Bluetooth, and Wired USB-C. A switch on the bottom of the mouse allows you to select your preferred mode.
Figure 3: The Redragon M693 supports 3-mode connection for versatile use.
2.1. 2.4GHz Wireless Connection
- Locate the 2.4GHz USB nano receiver stored in the compartment on the underside of the mouse.
- Plug the USB nano receiver into an available USB port on your computer.
- Slide the switch on the bottom of the mouse to the "2.4G" position.
- The mouse should automatically connect to your computer.
Video 1: Official demonstration of the Redragon M693's 3-mode wireless capabilities, including the 2.4GHz connection.
2.2. Bluetooth Connection
- Slide the switch on the bottom of the mouse to the "BT" position.
- Press and hold the "PAIR BT" button on the bottom of the mouse until the indicator light starts blinking, indicating it's in pairing mode.
- On your computer or device, go to Bluetooth settings and search for new devices.
- Select "Redragon M693" from the list of available devices to complete the pairing process.
2.3. Wired USB-C Connection
- Connect the supplied USB-C cable to the mouse's front port.
- Connect the other end of the USB-C cable to an available USB port on your computer.
- The mouse will automatically switch to wired mode and begin charging.
Operating Instructions
1. DPI Adjustment
The M693 mouse features 5 on-board DPI levels (1000/1500/2000/2400/4000) that can be adjusted directly on the mouse. For advanced customization and to set DPI levels up to 8000, use the Redragon Pro driver software.
Figure 4: The mouse is equipped with the PAW3104 Optical Pixart sensor for precise tracking.
2. Programmable Buttons
The mouse has 7 programmable buttons. These buttons can be customized with tactical keybinds and macros for various games or work applications using the Redragon Pro driver software. Two side macro buttons are included for enhanced gaming and working efficiency.
Figure 5: The 7 programmable buttons on the Redragon M693 mouse.
3. RGB Backlight Customization
Personalize your gaming setup with dynamic RGB lighting effects. The Redragon Pro driver allows you to DIY endless styles, including streaming, breathing, and waving effects, to match your preferences and create an immersive atmosphere.
Figure 6: Dynamic and groovy RGB backlight for immersive gaming.
Software Installation
To unlock the full potential of your Redragon M693 mouse, including advanced button programming, DPI customization, and RGB lighting effects, download and install the Redragon Pro driver software.
- Visit the official Redragon website (www.redragonzone.com).
- Navigate to the "Download" or "Support" section.
- Locate the driver for the M693 model.
- Download and run the installer, following the on-screen prompts.
- Once installed, launch the software to customize your mouse settings.
Figure 7: Redragon Pro Software interface for defining custom settings.
Maintenance
1. Cleaning
To maintain optimal performance, regularly clean your mouse. Use a soft, dry cloth to wipe down the surface. For optical sensor, use a cotton swab lightly dampened with isopropyl alcohol to gently clean the sensor area.
2. Battery Care
To prolong battery life, avoid fully discharging the mouse frequently. Charge it when the battery indicator is low. As mentioned in the charging section, do not use fast-charging plugs as they can damage the battery. Use a standard USB port or a low-power charger.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Mouse not connecting / unresponsive |
|
| Mouse lagging or erratic movement |
|
| Battery not holding charge |
|
| Programmable buttons not working |
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | M693 |
| Connectivity Technology | BT, 2.4Ghz Wireless, USB-C (Wired) |
| DPI Levels | 1000/1500/2000/2400/4000 (on-board), Max 8000 (via software) |
| Programmable Buttons | 7 |
| Sensor | PAW3104 Optical Pixart sensor |
| Polling Rate | Up to 1000Hz (adjustable via software) |
| Battery Capacity | 700 mAh Lithium Polymer |
| Battery Life | Up to 60 hours (eco-mode) |
| Product Dimensions | 8.23 x 5.94 x 1.65 inches |
| Item Weight | 5.3 ounces |
Warranty and Support
Redragon products come with a limited warranty. For detailed warranty information, technical support, or to register your product, please visit the official Redragon website or contact their customer service directly. Keep your purchase receipt for warranty claims.
Official Website: www.redragonzone.com