QUIRUMED SonicStimu Pro Portable Therapeutic Ultrasound Device

1. Introduction

The QUIRUMED SonicStimu Pro is a professional portable therapeutic ultrasound device designed for the treatment of chronic and acute muscle pain. This device utilizes ultrasound therapy to aid in the relief of pain, muscle spasms, and joint contractures. It features two multi-frequency treatment heads and an intuitive LCD screen for easy operation.

This manual provides essential information for the safe and effective use of your SonicStimu Pro device. Please read it thoroughly before initial use and retain it for future reference.

2. Safety Information

• Always consult a healthcare professional before using this device, especially if you have pre-existing medical conditions.
• Do not use the device on open wounds, broken skin, or sensitive areas such as the eyes, heart, or reproductive organs.
• Keep the device out of reach of children.
• Use only the provided power adapter and accessories.
• Ensure the device is disconnected from the power supply before cleaning.
• Do not immerse the main unit in water. The treatment heads are sealed for underwater therapy, but the main unit is not.
• If you experience any discomfort or adverse reactions during use, discontinue treatment immediately and consult a healthcare professional.

3. Package Contents

Verify that all items are present in the package:

• QUIRUMED SonicStimu Pro Main Unit
• Ultrasound Treatment Head (5 cm² AER, 1-3 MHz)
• Ultrasound Treatment Head (1 cm² AER, 1-3 MHz)
• Power Adapter
• User Manual

Image: Contents of the SonicStimu Pro package, showing the main unit, two different sized ultrasound heads, and the power adapter.

4. Device Overview

Familiarize yourself with the main components of the SonicStimu Pro device.

Image: The main unit of the SonicStimu Pro, displaying the LCD screen, control buttons for program, frequency, duty cycle, and time, and the connection ports for the treatment heads.

4.1. Treatment Heads

The device includes two ergonomic, sealed ultrasound heads:

• 5 cm² AER Head: Suitable for larger treatment areas. Operates at 1 MHz and 3 MHz.
• 1 cm² AER Head: Ideal for smaller, more focused treatment areas. Operates at 1 MHz and 3 MHz.

Image: Close-up of the two ultrasound treatment heads. The larger head is 5 cm² and the smaller head is 1 cm², both designed for multi-frequency operation.

5. Setup

1. Unpack: Carefully remove all components from the packaging.
2. Connect Power: Plug the power adapter into the main unit's power input, then connect the adapter to a suitable electrical outlet.
3. Attach Treatment Head: Select the appropriate ultrasound head (5 cm² or 1 cm²) for your treatment area. Align the connector of the head with the corresponding port on the main unit and push firmly until it clicks into place.
4. Power On: Press the power button on the main unit to turn on the device. The LCD screen will illuminate.

6. Operating Instructions

6.1. LCD Screen Overview

The LCD screen (7 cm high x 12 cm wide) displays all operational parameters, including selected program, frequency, duty cycle, and treatment time.

6.2. Selecting Treatment Parameters

The SonicStimu Pro offers 10 pre-set treatment programs. Use the control buttons next to the LCD screen to adjust settings:

• Program: Use the 'PROGRAM' buttons to cycle through the 10 available treatment models.
• Frequency: Use the 'FREQUENCY' buttons to select between 1 MHz and 3 MHz. 1 MHz is generally used for deeper tissue penetration, while 3 MHz is for superficial tissues.
• Duty Cycle: Use the 'DUTY CYCLE' buttons to adjust the pulse ratio (e.g., 10%, 20%, 50%, 100%). Continuous (100%) mode provides thermal effects, while pulsed modes (lower percentages) are primarily mechanical.
• Time: Use the 'TIME' buttons to set the desired treatment duration.

6.3. Application Technique

1. Apply a generous amount of ultrasound gel to the skin over the treatment area. This is crucial for effective ultrasound transmission.
2. Place the selected treatment head firmly and flat against the skin, ensuring full contact with the gel.
3. Move the treatment head in slow, continuous circular motions over the treatment area. Avoid holding the head stationary.
4. Monitor the LCD screen for treatment progress.
5. For underwater therapy, ensure the treatment head is fully submerged in water while maintaining contact with the skin. The main unit must remain dry.

7. Maintenance

7.1. Cleaning

• After each use, disconnect the device from power.
• Wipe the treatment heads and the main unit with a soft, damp cloth. A mild disinfectant can be used on the treatment heads.
• Do not use abrasive cleaners or solvents.
• Ensure no liquid enters the main unit.

7.2. Storage

• Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
• Keep the device and accessories in their original packaging or a protective case to prevent damage.

8. Troubleshooting

• Device does not power on: Check if the power adapter is securely connected to both the device and the electrical outlet. Ensure the outlet is functional.
• No ultrasound sensation: Ultrasound therapy typically does not produce a strong sensation. Ensure sufficient ultrasound gel is applied and the treatment head is in full contact with the skin. Verify that the device is powered on and a program is running.
• Error message on LCD: Refer to the specific error code in the full product manual (if available) or contact customer support. Try restarting the device.
• Treatment head not recognized: Ensure the treatment head is securely connected to the main unit. Disconnect and reconnect it firmly.

9. Specifications

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact QUIRUMED customer service through their official website or the retailer where the product was purchased.