1. Introduction
Thank you for choosing the Uten Mini Exercise Bike, Model X1460. This portable and compact exercise device is designed to provide a convenient way to train your arms and legs, improve muscle strength, joint range of motion, and coordination. It features adjustable resistance and an integrated LCD display to track your workout progress. Please read this manual thoroughly before use to ensure safe and effective operation.
2. Safety Instructions
- Always consult with a healthcare professional before starting any new exercise program.
- Ensure the exercise bike is placed on a stable, flat surface. Use the provided anti-slip mat to prevent movement during use.
- When exercising your legs, always remain seated. Do not stand on the pedals.
- Keep children and pets away from the equipment during operation.
- Check all components for wear or damage before each use. Do not use if any parts are loose or damaged.
- Adjust the pedal straps to securely fit your feet or hands.
- Do not over-exert yourself. Stop exercising immediately if you feel pain, dizziness, or nausea.
- The maximum user weight capacity is 150 kg (330 lbs).
3. Package Contents
Verify that all components are present and in good condition:
- 1 x Uten Mini Exercise Bike
- 1 x Screw Set for assembly
- 1 x User Manual
- 1 x Anti-slip mat
4. Setup
The Uten Mini Exercise Bike requires minimal assembly. Follow these steps:
- Attach the front and rear stabilizer bars to the main unit using the provided screws. Ensure they are securely fastened.
- Screw the pedals onto the crank arms. The left pedal is marked 'L' and the right pedal 'R'. Turn the left pedal counter-clockwise and the right pedal clockwise to tighten.
- Insert one AA battery (not included) into the LCD display unit.
- Place the anti-slip mat on the floor where you intend to use the bike, then place the exercise bike on top of the mat.
Setup Video Guide:
Video 1: This video demonstrates the assembly process and initial setup of a similar mini exercise bike, showing how to attach the stabilizer bars and pedals.
5. Operating Instructions
Leg Exercise:
Place the exercise bike on the floor in front of a chair. Sit comfortably on the chair and place your feet into the pedal straps. Adjust the straps for a secure fit. Begin pedaling at a comfortable pace. You can use this while working at a desk or relaxing on a sofa.
Arm Exercise:
Place the exercise bike on a sturdy table. Sit in front of the table and place your hands into the pedal straps. Adjust the straps for a secure fit. Begin pedaling with your arms to engage upper body muscles.
Adjusting Resistance:
The exercise bike features an adjustable resistance knob located on the top of the main unit. Turn the knob clockwise to increase resistance for a more challenging workout, and counter-clockwise to decrease resistance for an easier session. There are 6 levels of resistance.
Usage Video Guide:
Video 2: This short video demonstrates the mini exercise bike being used for both arm and leg exercises, showcasing its versatility.
6. LCD Display Functions
The integrated LCD display provides real-time feedback on your workout. Press the red button to cycle through the different metrics or activate the SCAN function to automatically rotate through them.
- SCAN: Automatically cycles through all metrics.
- TIME: Displays the duration of your exercise session.
- COUNT (CNT): Shows the total number of pedal revolutions during the current session.
- DISTANCE (DIS): Estimates the distance covered based on pedal revolutions.
- CALORIES (CAL): Estimates the calories burned during your workout.
- RPM (Revolutions Per Minute): Shows your current pedaling speed.
To reset the display values, press and hold the red button for a few seconds.
7. Maintenance
- Cleaning: Wipe down the unit with a damp cloth after each use. Avoid abrasive cleaners or solvents.
- Storage: Store the exercise bike in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically check all screws and bolts to ensure they are tight. Inspect pedals and straps for wear and tear.
- Battery Replacement: Replace the AA battery in the LCD display when the screen becomes dim or unresponsive.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike is unstable or slides during use. | Not on a flat surface; anti-slip mat not used or ineffective. | Ensure the bike is on a completely flat surface. Use the provided anti-slip mat. If sliding persists, place the bike against a wall or use a heavier, more robust mat. |
| LCD display is not working or dim. | Battery is dead or incorrectly installed. | Replace the AA battery. Ensure it is inserted with the correct polarity. |
| Resistance is too loose or too tight. | Resistance knob not adjusted correctly. | Turn the resistance knob clockwise to increase resistance, counter-clockwise to decrease. |
| Pedals are difficult to turn or make noise. | Loose components; internal friction. | Check that all screws and pedals are securely tightened. If noise persists, contact customer support. |
9. Specifications
- Model Number: X1460
- Brand: Uten
- Color: Black
- Material: Alloy Steel (Frame), Metal (Type of material)
- Dimensions (L x W x H): 40.5 x 35 x 30.6 cm (15.95 x 13.78 x 12.05 inches)
- Item Weight: 3.5 kg (7.7 lbs)
- Maximum Weight Recommendation: 150 kg (330 lbs)
- Resistance Levels: 6
- Control Type: Button
- Display Type: LCD
- Metrics Displayed: Time, Count, Distance, Calories, RPM
- Power Source: Battery Powered (1 x AA battery required, not included)
- Operating Mode: Manual
10. Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact Uten customer service directly through their official website or the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.
