ProMaster 24P Video Tripod Kit User Manual

Introduction

Thank you for choosing the ProMaster 24P Video Tripod Kit. This professional-grade tripod system is designed to provide stable and precise support for your video production needs. It features a fluid pan and tilt head, versatile height adjustment, and a quick-release plate, making it suitable for a wide range of camera setups up to 11 lbs.

Please read this manual thoroughly before using your tripod kit to ensure proper operation and to maximize its lifespan.

Package Contents

The ProMaster 24P Video Tripod Kit includes the following components:

• 24P Video Head
• 24P Tripod Legs
• 60872 Quick Release Plate
• Soft Carry Case

Image: The complete ProMaster 24P Video Tripod Kit, showing the assembled tripod with video head and legs.

Setup Instructions

1. Unfolding the Tripod Legs

1. Place the tripod on a flat, stable surface.
2. Release the leg locks on each leg section. The tripod has 3 leg sections.
3. Extend each leg to the desired height. The maximum height is 71.5 inches and the minimum height is 29.5 inches.
4. Securely fasten all leg locks to prevent accidental collapse.
5. Adjust the leg spread to ensure maximum stability.

Image: A user extending the legs of the ProMaster 24P Video Tripod to its full height.

2. Attaching the Video Head

The 24P Video Head comes pre-attached to the tripod legs. If it needs re-attachment or adjustment:

• Ensure the tripod legs are stable.
• Align the base of the video head with the mounting platform on the tripod legs.
• Rotate the head clockwise until it is securely tightened.

3. Mounting Your Camera

1. Locate the 60872 Quick Release Plate.
2. Attach the quick release plate to the bottom of your camera by screwing the mounting screw into the camera's tripod socket. Ensure it is tight.
3. On the video head, locate the quick release plate receiver.
4. Slide the quick release plate with your camera into the receiver until it clicks securely into place.
5. Verify that the camera is firmly attached and cannot accidentally detach.

Image: A camera securely mounted on the ProMaster 24P Video Tripod's fluid head, ready for use.

Operating Instructions

Pan and Tilt Adjustments

The 24P Video Head features smooth and fluid pan and tilt movements for precise camera positioning.

• Pan Lock: Loosen the pan lock knob (typically located at the base of the head) to allow 360-degree horizontal rotation. Tighten to lock the pan movement.
• Tilt Lock: Loosen the tilt lock knob (typically on the side of the head) to allow vertical tilting. Tighten to lock the tilt movement.
• Fluid Drag: The fluid head provides consistent drag for smooth movements. Adjust the tension if available, or rely on the inherent fluid design for optimal control.

Counterbalance System

The adjustable counterbalance system ensures a level and balanced shot, especially with heavier cameras.

• When mounting your camera, the counterbalance helps prevent the camera from tipping forward or backward.
• Adjust the camera's position on the quick release plate slightly forward or backward until the camera feels balanced and requires minimal effort to hold its position when the tilt lock is disengaged.

Height Adjustment

To adjust the tripod's height during operation:

1. Ensure your camera is securely mounted.
2. Carefully release the leg locks one section at a time.
3. Extend or retract the leg sections to the desired height.
4. Firmly re-engage all leg locks before releasing your grip on the camera.

Maintenance

• Cleaning: Wipe down the tripod and head with a soft, dry cloth after each use to remove dust, dirt, and moisture. For stubborn grime, use a slightly damp cloth and then dry thoroughly. Avoid harsh chemicals.
• Lubrication: The fluid head is factory-sealed and does not require user lubrication. Do not attempt to disassemble the head.
• Storage: Store the tripod in its soft carry case in a cool, dry place when not in use. Avoid extreme temperatures and high humidity.
• Inspection: Periodically check all screws, knobs, and leg locks to ensure they are tight and functioning correctly. If any part appears damaged, contact ProMaster support.

Troubleshooting

Specifications

Warranty Information

ProMaster products are designed for durability and performance. For specific warranty details regarding your ProMaster 24P Video Tripod Kit, please refer to the warranty card included with your purchase or visit the official ProMaster website. Keep your proof of purchase for warranty claims.

Customer Support

If you encounter any issues or have questions about your ProMaster 24P Video Tripod Kit that are not covered in this manual, please contact ProMaster customer support through their official website or the retailer where you purchased the product.

Online Resources: For additional tips, tutorials, and product information, visit the ProMaster Store on Amazon or the official ProMaster website.