Homemory Window Candles with Sensor Dusk to Dawn

1. Product Overview

The Homemory HGKLMZXP-LST6 window candles are battery-operated LED taper candles designed for indoor use. They feature a built-in light sensor for automatic dusk-to-dawn operation, strong suction cups for window mounting, and a realistic 3D flickering flame effect. This package includes 6 candlesticks and 6 suction cups.

Image 1: Homemory Window Candles displayed in a home window at night, showcasing their warm glow.

2. Setup Instructions

2.1 Unpacking

Carefully remove all components from the packaging. Verify that you have 6 LED candlesticks and 6 suction cups.

2.2 Battery Installation

1. Twist the bottom cap of the candlestick counter-clockwise to open the battery compartment.
2. Insert two (2) AA batteries (not included) into the compartment, ensuring correct polarity (+/-).
3. Twist the bottom cap clockwise to securely close the compartment. Ensure the cap is tightened sufficiently to make proper contact for power.

Image 2: A Homemory window candle with its bottom cap removed, showing the battery compartment where two AA batteries are inserted.

2.3 Attaching Suction Cups

1. Ensure the window surface and the suction cup are clean and dry. Wipe both with a clean cloth if necessary.
2. Attach the suction cup to the middle section of the candlestick. The candle should fit snugly into the clips of the suction cup.
3. Press the suction cup firmly against the desired window surface to create a secure seal.

Image 3: A close-up view of a Homemory window candle with its white suction cup securely attached, ready for window mounting.

3. Operating Instructions

3.1 Dusk to Dawn Sensor Function

The candles are equipped with a light sensor that automatically controls their operation. For optimal performance, ensure the small sensor hole on the candle body is pointed towards the window and receives ambient light from outside.

• Automatic On: The candle will automatically illuminate at dusk when the surrounding light level decreases.
• Automatic Off: The candle will automatically turn off at dawn when the surrounding light level increases.

Image 4: An illustration showing the Homemory window candle's sensor hole and its automatic operation, turning on at dusk and off at dawn.

3.2 Flickering Flame Effect

The candles feature a 3D LED flame designed to simulate the natural flicker of a real candle. This effect is visible from a distance and enhances the aesthetic appeal.

Image 5: A close-up of the Homemory window candle's 3D flickering flame, showcasing its realistic appearance.

4. Maintenance

4.1 Battery Replacement

When the candle's light appears dim or stops illuminating, it is time to replace the AA batteries. Refer to Section 2.2 for battery installation instructions.

4.2 Cleaning

To maintain optimal performance and appearance, periodically wipe the candles and suction cups with a soft, dry cloth. Avoid using abrasive cleaners or solvents.

4.3 Storage

Store the candles in a cool, dry place away from direct sunlight and extreme temperatures. Avoid high-humidity environments to prevent potential damage to electronic components.

5. Troubleshooting

• Candle does not turn on:
  • Check if batteries are inserted correctly with proper polarity.
  • Ensure the bottom cap is tightened securely to make electrical contact.
  • Verify that the sensor hole is facing the window and is exposed to sufficient ambient light for dusk detection.
  • Replace old batteries with new ones.
• Candle does not turn off:
  • Ensure the sensor hole is facing the window and is receiving sufficient daylight for dawn detection.
  • Check for any obstructions blocking light from reaching the sensor.
• Suction cup does not hold:
  • Clean both the window surface and the suction cup thoroughly to remove dust or grease.
  • Ensure the window surface is smooth and non-porous.
  • Apply firm pressure when attaching the suction cup to create a strong seal.

6. Specifications

7. Support

For any issues or questions regarding your Homemory window candles, please contact our Customer Support Team. We are committed to providing assistance and ensuring your satisfaction.