Wireless Charging Case for AirPods Pro 1 & 2 User Manual

Product Overview

This wireless charging case is designed as a compatible replacement for your original AirPods Pro 1 and AirPods Pro 2 charging case. It offers both wireless and wired charging capabilities, ensuring your AirPods are always ready for use. Equipped with a Bluetooth pairing sync button, it facilitates easy connection to your devices. The case is built with durable materials and incorporates multiple protection features to safeguard your earbuds during charging.

Figure 1: Front view of the Wireless Charging Case with lid open.

What's in the Box

Upon opening the product packaging, please ensure all components are present and in good condition.

• 1 x Wireless Charging Case for AirPods Pro
• 1 x USB Charging Cable

Setup and Pairing

Follow these steps to set up your new charging case and pair your AirPods Pro with your device.

1. Insert AirPods: Place your AirPods Pro earbuds into the charging slots within the case. Ensure they are seated correctly.
2. Activate Bluetooth: On your smartphone or device, navigate to the Bluetooth settings and ensure Bluetooth is turned on.
3. Initiate Pairing: With the AirPods inside the case and the lid open, press and hold the sync button on the back of the charging case. The indicator light on the front of the case will flash white.
4. Connect on Device: A pop-up window should appear on your iPhone (or similar prompt on other devices) indicating the AirPods are found. Tap "Connect". If a message like "Not Your AirPods" appears, proceed to connect.
5. Complete Pairing: Once pairing is complete, close the lid of the charging case and then open it again. The connection should be established.

Figure 2: Step-by-step guide for Bluetooth pairing.

Figure 3: Visual representation of the pairing process with a smartphone.

Operating Instructions

Charging the Case

The charging case supports both wired (Lightning cable) and wireless charging.

• Wired Charging: Connect a Lightning cable to the charging port at the bottom of the case and plug the other end into a USB power adapter or computer.
• Wireless Charging: Place the charging case on a Qi-compatible wireless charging pad with the indicator light facing up.

Figure 4: Wired and wireless charging methods for the case.

Indicator Light Status

The LED indicator light on the front of the case provides information about the battery status.

• Green light (solid): 66%-100% charge remaining.
• Blue light (solid): 33%-66% charge remaining.
• Red light (solid): 10%-33% charge remaining.
• Red light (flashing): Below 10% charge remaining.

Figure 5: LED indicator light meanings.

Maintenance

To ensure the longevity and optimal performance of your charging case, follow these maintenance guidelines:

• Cleaning: Use a soft, dry, lint-free cloth to clean the exterior of the case. For stubborn marks, slightly dampen the cloth with water. Avoid using abrasive materials or harsh chemicals.
• Port Care: Keep the Lightning charging port free of dust and debris. Use a soft brush or compressed air if necessary, but avoid inserting sharp objects.
• Storage: Store the case in a cool, dry place away from direct sunlight and extreme temperatures.
• Protection: While the case is made of durable PC and ABS plastic, avoid dropping it or subjecting it to strong impacts to prevent damage.

Troubleshooting

If you encounter issues with your charging case, refer to the following common solutions:

Specifications

Figure 6: Product dimensions and portability.

Warranty and Support

This product comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims, please refer to the warranty card included in your product packaging or contact the seller directly.

For technical support or further assistance, please reach out to the seller or manufacturer through the contact information provided at the point of purchase.