Sauder 8-Cube Organizer (Model 431400) Instruction Manual

1. Product Overview

The Sauder 8-Cube Organizer is a versatile storage unit designed for various household items. It features eight cubbyhole areas suitable for books, decorative items, or 13"x13" storage baskets (sold separately). This unit is finished on all sides, allowing for flexible placement in either vertical or horizontal orientation.

Image 1.1: The 8-Cube Organizer displayed vertically, showcasing its storage capacity for books and decor.

Image 1.2: The 8-Cube Organizer configured horizontally, functioning as a low storage unit or console.

2. Safety Information

• Anti-Tip Device: It is highly recommended to install the included anti-tip device to prevent the unit from tipping over, especially in households with children or pets. Follow the instructions provided in the assembly manual for proper installation.
• Weight Distribution: Distribute weight evenly across all shelves. Avoid placing heavy items on the top shelves if the unit is used vertically, unless properly secured.
• Surface Stability: Ensure the organizer is placed on a flat, stable, and level surface to prevent wobbling or instability.
• Assembly: Always follow the assembly instructions carefully. Do not skip steps or use power tools unless explicitly instructed, as this may damage the product or compromise its stability.
• Proposition 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer or birth defects or other reproductive harm.

3. Package Contents

Before beginning assembly, verify that all components listed below are present and undamaged. Refer to the detailed parts list in your physical assembly manual for specific part numbers and quantities.

• Materials (Engineered Wood panels)
• Hardware (screws, dowels, cam locks, etc.)
• Assembly instructions booklet
• Anti-tip restraint kit

4. Assembly Instructions

This product requires assembly. A detailed, step-by-step assembly manual is included in the product packaging. Please follow these instructions carefully for proper and safe assembly.

1. Unpack: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Identify Parts: Match all parts and hardware to the diagrams in the assembly manual.
3. Follow Steps: Assemble the unit by following the numbered steps in the provided manual. Ensure all fasteners are tightened securely, but do not overtighten.
4. Install Anti-Tip Device: Securely attach the anti-tip device to the unit and to a wall stud as instructed in the manual. This is a critical safety step.

For visual guidance, an official product video demonstrating the organizer's features and potential configurations is available below:

5. Operating Instructions

The Sauder 8-Cube Organizer offers flexible usage options:

• Vertical Orientation: Use the unit upright as a tall bookcase or display shelf. Ensure it is properly secured with the anti-tip device.
• Horizontal Orientation: Lay the unit on its side to create a low console, media stand, or horizontal storage unit.
• Storage: Each cubbyhole is approximately 13.5 inches high and 13 inches deep, suitable for standard 13"x13" storage bins, books, or decorative items.

Image 5.1: The organizer demonstrating compatibility with standard storage bins.

6. Maintenance and Care

• Cleaning: Wipe the surface with a dry cloth to remove dust and light dirt. Avoid using abrasive cleaners or harsh chemicals, which can damage the finish.
• Placement: Avoid direct sunlight and heat sources to prevent fading or warping of the wood finish.
• Regular Checks: Periodically check all fasteners and connections to ensure they remain tight. Retighten if necessary.

7. Troubleshooting

• Wobbling Unit: Ensure the unit is on a level surface. Check all cam locks and screws for tightness. If the floor is uneven, use shims under the base.
• Missing Parts: If any parts or hardware are missing, refer to the contact information in the Warranty and Support section to request replacements. Do not attempt to assemble with missing components.
• Damaged Parts: Do not proceed with assembly if any parts are damaged. Contact customer support for replacement parts.

8. Specifications

Image 8.1: Dimensional diagram of the 8-Cube Organizer.

9. Warranty and Support

Manufacturer Warranty: This product comes with a 5-year parts warranty from Sauder Woodworking.

Customer Support: For assistance with assembly, missing parts, or any product-related inquiries, please contact Sauder customer service.

• Website: sauder.com/service
• Phone: 800-523-3987

Image 9.1: Sauder's domestic call center is ready to assist with product support.