1. Introduction
Welcome to the user manual for your Rapoo VT960S High Performance Wireless Gaming Mouse. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your device to ensure optimal performance and an enhanced user experience.
Package Contents
- Rapoo VT960S Wireless Gaming Mouse
- USB Receiver (2.4 GHz)
- USB-C to USB-A Charging/Data Cable
- User Manual (this document)
2. Product Overview
Key Features
- PAW3370 Professional Gaming Sensor with up to 19000 DPI
- Wired and 2.4 GHz Wireless Connectivity
- Customizable OLED Display
- 9 Programmable Buttons
- Lightsync RGB Backlighting
- On-Board Memory for Profile Storage
- Ergonomic Design with Aluminum Alloy Body
- Built-in 600 mAh Rechargeable Battery (up to 125 hours endurance)
Button Layout
The Rapoo VT960S features 9 customizable buttons designed for intuitive control and personalized gaming. Refer to the diagram below for button identification.
Image: Diagram illustrating the button layout of the Rapoo VT960S mouse, labeling the Left Button, Right Button, Scroller Forward, Middle Button, Scroller Back, CPI button, Back button, Forward button, and Fire Button.
OLED Display
The integrated OLED display provides real-time information such as DPI settings, battery status, and custom graphics. This display can be customized via the Rapoo driver software.
Image: Close-up view of the Rapoo VT960S mouse's OLED display, showing a custom graphic and indicating its pixel resolution and size. Icons for customization are shown below.
3. Setup
Charging the Mouse
Before initial use, it is recommended to fully charge the mouse. Connect the provided USB-C cable to the mouse and the USB-A end to a powered USB port on your computer or a USB wall adapter. The OLED display will indicate charging status. A full charge typically takes approximately 3 hours and provides 30-125 hours of use depending on RGB and OLED usage.
Wireless Connection (2.4 GHz)
- Locate the USB receiver. It may be stored in a compartment on the underside of the mouse.
- Plug the USB receiver into an available USB port on your computer.
- Turn on the mouse using the power switch located on the underside.
- The mouse should automatically connect to your computer. If not, ensure the receiver is properly inserted and the mouse is powered on.
Image: The Rapoo VT960S wireless gaming mouse displayed alongside its 2.4 GHz USB receiver and a USB-C charging cable, illustrating the components for wireless setup.
Wired Connection
The Rapoo VT960S can also be used in wired mode. Simply connect the USB-C cable from the mouse to your computer's USB port. The mouse will function as a wired device and charge simultaneously.
Image: The Rapoo VT960S gaming mouse in use, highlighting its capability for both wired and wireless operation, with an emphasis on its extended battery endurance.
Driver Installation
To unlock the full customization potential of your Rapoo VT960S mouse, including programmable buttons, DPI settings, RGB lighting, and OLED display customization, download and install the official Rapoo driver software from the Rapoo website. Follow the on-screen instructions for installation.
4. Operating Instructions
DPI Adjustment
The mouse features an adjustable DPI button (often labeled 'CPI' or 'DPI') to change sensitivity on the fly. Press this button to cycle through preset DPI levels. You can customize these levels and add more granular control (50 DPI increments) using the Rapoo driver software. The OLED display will show the current DPI setting.
Image: The Rapoo VT960S gaming mouse with visual effects indicating rapid movement, showcasing its adjustable real-time CPI button and various DPI settings ranging from 800 to 19000.
Programmable Buttons
The 9 buttons on the VT960S can be programmed for various functions, macros, or key bindings using the Rapoo driver software. The mouse supports up to 5 personalized profiles, which are stored on the mouse's on-board memory, allowing you to use your custom settings on different computers without re-configuration.
RGB Backlight Customization
The mouse features 16.8 million color RGB backlighting. Use the Rapoo driver software to select from various lighting modes, effects, and colors to personalize your mouse's appearance.
Image: The Rapoo VT960S gaming mouse illuminated with vibrant RGB backlighting, demonstrating its 16.8 million color options and various customizable lighting effects.
OLED Display Customization
The OLED display can be customized with personal images or animations through the Rapoo driver software. Refer to the software's instructions for detailed steps on uploading custom content.
5. Maintenance
Cleaning
- Use a soft, dry cloth to wipe the surface of the mouse.
- For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution. Avoid harsh chemicals.
- Do not allow liquids to enter the mouse's interior.
Storage
When not in use for extended periods, store the mouse in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the mouse is turned off to conserve battery life.
Battery Care
- Avoid fully discharging the battery frequently.
- Charge the mouse regularly, even if not in constant use, to maintain battery health.
- Do not expose the battery to high temperatures.
6. Troubleshooting
Mouse Not Responding
- Check Power: Ensure the mouse is turned on and has sufficient battery charge.
- Wireless Connection: Verify the USB receiver is securely plugged into a working USB port. Try a different USB port.
- Wired Connection: If using wired mode, ensure the USB-C cable is firmly connected to both the mouse and the computer.
- Re-pairing: If wireless connection is lost, consult the Rapoo driver software for re-pairing instructions.
DPI/Sensitivity Issues
- Adjust DPI: Use the DPI button on the mouse to cycle through sensitivity levels.
- Software Settings: Open the Rapoo driver software to fine-tune DPI settings and ensure profiles are correctly loaded.
RGB Lighting Not Working
- Software Control: Ensure RGB lighting is enabled and configured in the Rapoo driver software.
- Power Saving: Check if power-saving features are disabling RGB lighting.
Software Not Detecting Mouse
- Reinstall Driver: Uninstall and reinstall the Rapoo driver software.
- Firmware Update: Check the Rapoo website for any available firmware updates for your mouse.
7. Technical Specifications
| Feature | Specification |
|---|---|
| Brand | RAPOO |
| Model | VT960S |
| Connectivity | 2.4 GHz Wireless, USB Wired |
| Sensor | PAW3370 Optical Sensor |
| DPI Range | 800-19000 DPI (Adjustable) |
| Tracking Speed | 400 IPS |
| Acceleration | 50G |
| Polling Rate | 1000 Hz |
| Buttons | 9 Programmable Buttons |
| Display | Customizable OLED Display (64x68 Pixel, 0.66in) |
| Backlight | 16.8 Million RGB Lightsync |
| Battery | 600 mAh Rechargeable Lithium Battery |
| Battery Life | Up to 125 hours (without RGB/OLED) |
| Click Lifetime | 50 Million Clicks |
| Material | Aluminum Alloy |
| Dimensions | 12 x 5 x 4 cm |
| Weight | 260 g |
| Compatibility | Windows 10, Windows 8, Windows 7, Windows XP, Vista, Linux |
8. Warranty and Support
Warranty Information
Rapoo products are covered by a limited warranty from the date of purchase. Please refer to the warranty card included with your product or visit the official Rapoo website for detailed warranty terms and conditions specific to your region.
Customer Support
For technical assistance, product inquiries, or warranty claims, please visit the official Rapoo support website or contact their customer service department. Contact information can typically be found on the Rapoo website or in your product packaging.
