OSRAM TYREinflate 6000

OSRAM TYREinflate 6000 Digital Cordless Tire Inflator

User Manual

1. Introduction

The OSRAM TYREinflate 6000 is a versatile, digital, and cordless tire inflator designed for convenient and efficient inflation of vehicle tires and other inflatable items. Equipped with a rechargeable Li-Ion battery, it offers portability for various applications, including automotive use, camping, and recreational activities. This device features an automatic stop function, a deflator valve, a backlit LED display, and an integrated LED light for enhanced usability in diverse conditions.

2. Safety Information

3. Package Contents

Verify that all items are present in the package:

OSRAM TYREinflate 6000 with included adapters and hose

Image: The OSRAM TYREinflate 6000 unit shown with its various adapters and inflation hose.

4. Product Features and Components

The TYREinflate 6000 is designed for ease of use and versatility. Key components include:

Person holding OSRAM TYREinflate 6000 next to a flat car tire

Image: The OSRAM TYREinflate 6000 being held, displaying its digital screen and controls, next to a flat car tire.

5. Setup

5.1 Charging the Device

  1. Connect the provided AC mains charger to the charging port on the TYREinflate 6000.
  2. Plug the charger into a standard wall outlet.
  3. The LED display will indicate charging status. Allow the device to fully charge before first use.
  4. Alternatively, the device can be powered directly using the 12V DC cable from a vehicle's power socket.

5.2 Attaching the Inflation Hose and Adapters

  1. Screw the inflation hose securely onto the designated port on the device.
  2. For specific inflatables, select the appropriate adapter from the 10-piece set and attach it to the end of the inflation hose.

6. Operating Instructions

6.1 Inflating Vehicle Tires

  1. Ensure the vehicle is parked safely and the engine is off.
  2. Press the power button to turn on the TYREinflate 6000. The display will show the current tire pressure.
  3. Use the mode button to select the desired pressure unit (e.g., BAR, PSI).
  4. Use the '+' and '-' buttons to set the target pressure. Refer to your vehicle's manual or door jamb sticker for recommended tire pressures.
  5. Screw the inflation hose connector onto the tire valve stem. Ensure a tight seal to prevent air leakage.
  6. Press the start button to begin inflation. The device will automatically stop once the target pressure is reached.
  7. Unscrew the hose connector from the tire valve.
  8. Important: Tire pressure measurements and inflation should always be performed on cold tires for optimal accuracy.

6.2 Inflating Other Items (e.g., Air Mattresses, Balls)

  1. Attach the appropriate adapter from the 10-piece set to the inflation hose.
  2. Press the power button to turn on the device.
  3. Select the appropriate inflation mode for the item (e.g., ball, mattress) if available, or set a suitable target pressure.
  4. Insert the adapter firmly into the item's inflation port.
  5. Press the start button to begin inflation. Monitor the item to prevent over-inflation, especially for items without specific pressure recommendations.
  6. The device can inflate a single air mattress in approximately 2 minutes.
OSRAM TYREinflate 6000 inflating an air mattress

Image: The OSRAM TYREinflate 6000 connected and inflating an air mattress, demonstrating its versatility.

6.3 Using the Deflator Valve

To reduce pressure in a tire or inflatable, use the integrated deflator valve. This allows for controlled air release to achieve the desired pressure.

6.4 Using as a Power Bank

The TYREinflate 6000 features a USB output port, allowing it to function as a power bank. Connect your electronic device (e.g., mobile phone) to the USB port using a compatible cable to charge it.

7. Maintenance

8. Troubleshooting

ProblemPossible CauseSolution
Device does not turn on.Battery is discharged.Charge the device using the AC charger or 12V DC cable.
Slow inflation or no inflation.Hose not securely attached; Adapter not sealed properly; Low battery.Ensure hose and adapter are tightly connected. Check battery level and recharge if necessary.
Inaccurate pressure reading.Tire is hot; Sensor malfunction.Always measure pressure on cold tires. If issue persists, contact support.
Device stops unexpectedly.Target pressure reached; Overheating; Low battery.Check if target pressure is met. Allow device to cool down. Recharge battery.

9. Specifications

10. Warranty and Support

OSRAM offers a 2-year warranty on the TYREinflate 6000 product. For specific warranty conditions, claims, or technical support, please refer to the official OSRAM website or contact their customer service department.

For detailed warranty information, visit: www.osram.com/am-guarantee

Related Documents - TYREinflate 6000

Preview OSRAM TYREinflate 2000: Compact Rechargeable Tyre Inflator with Powerbank and Light
The OSRAM TYREinflate 2000 is a versatile, rechargeable tyre inflator featuring a built-in power bank and LED light. Ideal for cars, motorcycles, and bicycles, it offers easy pressure setting, multiple units (PSI, BAR, KPA), and auto-stop functionality.
Preview OSRAM TYREinflate 6000 Digitaler Reifenfüller und Luftpumpe | Produktdatenblatt
Umfassendes Produktdatenblatt für den OSRAM TYREinflate 6000 (OTIR6000), einen kabellosen, wiederaufladbaren digitalen Reifenfüller mit Li-Ion Akku. Enthält technische Spezifikationen, Funktionen wie automatische Stopp-Funktion und Luftablassventil, sowie Informationen zu Anwendung, Umwelt und Verpackung.
Preview OSRAM TYREinflate 4000 Rechargeable Tyre Inflator - User Manual and Specifications
Detailed information on the OSRAM TYREinflate 4000 rechargeable tyre inflator, including specifications, operating instructions, safety warnings, and intended use for vehicle tyres and other inflatables. Learn how to use this portable air compressor for efficient tyre inflation.
Preview OSRAM DALI-2 Sensor LS/PD HB LI: Occupancy and Daylight Sensor Technical Guide
Technical specifications, operation, wiring, and mounting instructions for the OSRAM DALI-2 Sensor LS/PD HB LI, an occupancy and daylight sensor for DALI-2 light management systems.
Preview OSRAM NIGHT BREAKER LED Kompatibilitätsliste für Fahrzeuge
Finden Sie die perfekte OSRAM NIGHT BREAKER LED-Nachrüstlampe für Ihr Auto, Wohnmobil oder Spezialfahrzeug mit dieser umfassenden Kompatibilitätsliste. Informationen zu Modellen, Einbau und Leistung.
Preview e:cue SYMPHOLIGHT 3.0 User Manual
Comprehensive user manual for e:cue SYMPHOLIGHT 3.0, detailing installation, features, automation, and advanced functionalities for digital lighting control.