Introduction
This manual provides detailed instructions for the installation, use, and maintenance of your BoxWave ClearTouch Anti-Glare Screen Protector for the Apeman C750. Please read these instructions carefully before proceeding with installation to ensure optimal performance and longevity of the product.
Product Overview
The BoxWave ClearTouch Anti-Glare Screen Protector is designed to protect your Apeman C750 screen from scratches, reduce glare, and minimize fingerprints. Each package contains two screen protectors and essential installation accessories.
Image: Contents of the BoxWave ClearTouch Anti-Glare Screen Protector package, showing two screen protectors, an applicator card, a microfiber cleaning cloth, and a dust-removing sticker.
Image: A closer view of the BoxWave ClearTouch Anti-Glare Screen Protector and its included accessories, highlighting the two screen films and cleaning tools.
Package Contents:
- 2 x ClearTouch Anti-Glare Screen Protectors
- 1 x Applicator Card
- 1 x Microfiber Cleaning Cloth
- 1 x Dust Removing Sticker
Features
- Anti-Glare: Disperses light to reduce reflections and improve screen visibility in various lighting conditions.
- Anti-Fingerprint: Matte surface repels smudges and fingerprints, keeping your screen cleaner.
- Precision Cut: Custom-designed to fit the Apeman C750 screen perfectly, ensuring full functionality.
- Smooth Surface: Provides a comfortable, paper-like feel for touch interactions and stylus use.
- Residue-Free Adhesive: Special glueless adhesive ensures no sticky residue upon removal.
Image: Visual comparison demonstrating the anti-smudge properties of the BoxWave screen protector versus a standard screen, showing significantly fewer fingerprints on the protected side.
Image: A tablet screen with the ClearTouch protector, showing a stylus being used for writing, illustrating the paper-like tactile experience.
Setup and Installation
Follow these steps carefully for a bubble-free installation.
- Prepare Your Workspace: Choose a clean, dust-free environment. Wash your hands thoroughly to avoid transferring oils or dirt to the screen or protector.
- Clean the Screen: Use the included microfiber cleaning cloth to thoroughly wipe down the Apeman C750 screen. Ensure all dust, smudges, and fingerprints are removed. For stubborn marks, a screen cleaner (not included) can be used sparingly.
- Remove Dust: Use the dust-removing sticker to lift any remaining dust particles from the screen. Lightly dab the sticker across the entire screen surface.
- Align the Protector: Carefully peel back a small portion of the protective film labeled '1' from one corner of the screen protector. Align the exposed edge of the screen protector with the corresponding edge of your Apeman C750 screen. Pay close attention to cutouts for cameras or sensors.
- Apply Gradually: Once aligned, slowly peel back the rest of the protective film '1' while simultaneously using the applicator card to smooth the screen protector onto the screen. Apply gentle, even pressure from the aligned edge outwards to push out any air bubbles.
- Remove Bubbles: If bubbles appear, gently lift the nearest edge of the screen protector and re-apply, using the applicator card to push the air out towards the edges. Small bubbles may disappear over 24-48 hours.
- Remove Top Film: Once the screen protector is fully applied and free of major bubbles, carefully peel off the top protective film labeled '2'.
- Final Polish: Use the microfiber cloth to gently wipe the newly installed screen protector, removing any remaining smudges or fingerprints.
Operating and Usage
The ClearTouch Anti-Glare Screen Protector is designed to be fully transparent and maintain the original touch sensitivity of your Apeman C750 screen. You can interact with your device as usual, enjoying reduced glare and a smoother, anti-fingerprint surface. The matte finish also provides a tactile experience similar to writing on paper, which can be beneficial for stylus users.
Maintenance
To keep your screen protector clean and clear:
- Wipe regularly with the included microfiber cleaning cloth to remove dust and light smudges.
- For more persistent marks, lightly dampen the microfiber cloth with water or a screen-safe cleaning solution. Avoid harsh chemicals or abrasive materials.
- Do not attempt to peel off the screen protector for cleaning, as this may introduce dust or damage the adhesive.
Troubleshooting
| Issue | Solution |
|---|---|
| Bubbles under the protector | Most bubbles are caused by dust. Gently lift the nearest edge of the protector and use the dust-removing sticker to lift the dust particle. Re-apply using the applicator card. Small bubbles may dissipate naturally within 24-48 hours. |
| Dust trapped under the protector | Carefully lift the corner of the screen protector closest to the dust. Use the dust-removing sticker to gently dab and lift the dust particle. Avoid touching the adhesive side with your fingers. |
| Protector not adhering properly | Ensure the screen was thoroughly cleaned before application. If the issue persists, the protector may be damaged or misaligned. Use the second protector provided in the package. |
| Reduced touch sensitivity | This is uncommon. Ensure the protector is applied smoothly without air gaps. If the issue persists, verify the protector is correctly aligned and not interfering with sensors. |
Specifications
- Material: Polyethylene Terephthalate (PET)
- Finish Type: Matte
- Special Feature: Anti-Glare, Anti-Fingerprint
- Compatibility: Apeman C750
- Number of Items: 2 Screen Protectors per package
- Manufacturer: BoxWave
Warranty and Support
For information regarding warranty coverage or technical support, please refer to the official BoxWave website or contact their customer service directly. Contact details are typically available on the product packaging or the manufacturer's website.
