Blomus SONO Wall Adapter for Soap Dispenser/Tumbler - Model 66445 Instruction Manual

1. Product Overview

The Blomus SONO Wall Adapter is designed to securely hold your Blomus SONO Soap Dispenser or Tumbler, optimizing counter space in your bathroom. Crafted from lacquered stainless steel, this practical wall mount ensures stability even during daily use. It integrates seamlessly with the modern aesthetic of the SONO collection.

Image: Blomus SONO Soap Dispenser securely held by the white wall adapter, demonstrating its intended use and space-saving design.

2. Package Contents

Please verify that all components are present before proceeding with installation:

• 1 x Blomus SONO Wall Adapter (Model 66445)
• 1 x Set of Mounting Hardware (screws, wall anchors)

3. Safety Information

• Always use appropriate tools for installation.
• Ensure the mounting surface is suitable and can support the weight of the adapter and its contents.
• Keep small parts of the mounting hardware away from children.
• Do not overtighten screws during installation to avoid damaging the adapter or wall.

4. Setup and Installation

Follow these steps to properly install your Blomus SONO Wall Adapter:

1. Choose Location: Select a suitable wall location, ensuring it is level and provides adequate clearance for the soap dispenser or tumbler.
2. Mark Drilling Points: Hold the wall adapter against the desired location on the wall. Use a pencil to mark the positions for the mounting screws through the pre-drilled holes on the adapter.
3. Drill Holes: Using an appropriate drill bit for your wall type (e.g., masonry for tile/concrete, wood bit for studs), drill holes at the marked points.
4. Insert Wall Anchors: If drilling into drywall or hollow walls, gently tap the provided wall anchors into the drilled holes until flush with the wall surface.
5. Mount Adapter: Align the wall adapter with the drilled holes (and anchors, if used). Insert the mounting screws through the adapter's holes and tighten them securely with a screwdriver. Do not overtighten.
6. Test Stability: Gently pull on the installed adapter to ensure it is firmly attached to the wall before placing any items in it.

For a visual overview of the Blomus SONO collection, including compatible items, please refer to the video below:

5. Operating Instructions

Using the Blomus SONO Wall Adapter is straightforward:

• Placing Item: Gently slide your Blomus SONO Soap Dispenser or Tumbler into the adapter's ring until it rests securely.
• Removing Item: To remove the dispenser or tumbler for refilling or cleaning, simply lift it upwards out of the adapter.
• The adapter is designed to hold the item firmly, even when dispensing soap.

6. Maintenance and Care

To ensure the longevity and appearance of your Blomus SONO Wall Adapter, please follow these care instructions:

• Cleaning: Clean the adapter regularly with a soft, damp cloth. For stubborn marks, a mild soap solution can be used.
• Drying: Always dry the adapter thoroughly after cleaning to prevent water spots or mineral buildup.
• Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, or strong chemical detergents, as these can damage the lacquered stainless steel finish.
• Hand Wash Only: This product is not dishwasher safe.

7. Troubleshooting

If you encounter any issues with your wall adapter, consider the following:

• Adapter feels loose: Re-check the mounting screws. Ensure they are tightened securely, but not excessively. Verify that the wall anchors (if used) are properly seated.
• Dispenser/Tumbler does not fit: Ensure you are using a genuine Blomus SONO Soap Dispenser or Tumbler. This adapter is specifically designed for compatibility with these items.
• Scratches on adapter: Avoid using abrasive materials or sharp objects near the adapter. Follow the cleaning instructions carefully.

8. Specifications

9. Warranty and Support

Warranty: This Blomus SONO Wall Adapter comes with a 2-year manufacturer's defect warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

Exclusions: The warranty does not cover damage resulting from improper installation, misuse, abuse, accidents, unauthorized repairs, or normal wear and tear.

Customer Support: For warranty claims, technical assistance, or any questions regarding your Blomus product, please contact Blomus customer support directly. Refer to the official Blomus website for the most current contact information.