SALKING 2-in-1 Ultrasonic Essential Oil Diffuser & Himalayan Salt Lamp User Manual

Introduction

This manual provides detailed instructions for the safe and efficient operation of your SALKING 2-in-1 Ultrasonic Essential Oil Diffuser and Himalayan Salt Lamp. This innovative device combines the benefits of aromatherapy with the ambient glow of a Himalayan salt lamp, creating a relaxing and pleasant atmosphere in your home or office.

Important Safety Precautions

• Ensure the diffuser is properly plugged into a suitable power outlet.
• Place the unit on a hard, flat, and stable surface. Avoid soft or uneven surfaces.
• Do not place the diffuser under wet conditions or near water sources to prevent electrical hazards.
• Always use the device in dry rooms.
• Do not exceed the maximum water level indicated inside the water tank.
• Unplug the diffuser from the power source when not in use, during cleaning, or when refilling.
• Keep out of reach of children and pets.
• Use only pure essential oils. Avoid corrosive substances.

Package Contents

• SALKING 2-in-1 Diffuser Unit
• Himalayan Pink Salt Crystals
• Measuring Cup
• DC Adapter
• User Manual (this document)

Product Components

The SALKING diffuser consists of several key parts:

• Mist Outlet: Where the cool mist is released.
• Cover: Protects the water tank and mist outlet.
• Water Tank: Holds water and essential oils.
• Air Outlet: Part of the mist generation system.
• Water Baffle: Directs water flow.
• Outer Cover: The main body of the diffuser.
• Mist Buttons: Controls mist output and timer.
• LED Light Bulb: Illuminates the salt crystals.
• 100% Pink Himalayan Salt Rocks: Placed in the salt stone container.
• Salt Stone Container: Holds the Himalayan salt rocks.
• Measuring Cup: For accurate water measurement.
• DC Adapter: Power supply for the unit.

Setup Instructions

Follow these steps for initial setup:

1. Unpack: Carefully remove the diffuser and all accessories from its packaging.
2. Clean: Wipe all removable parts with a damp cloth.
3. Place Salt Rocks: Open the salt stone container and carefully place the provided Himalayan pink salt crystals inside. Ensure they are evenly distributed.
4. Fill Water Tank: Remove the top cover of the diffuser. Using the measuring cup, fill the water tank with clean water up to the maximum level indicated. Do not overfill.
5. Add Essential Oils: Add a few drops of your preferred essential oil directly into the water in the tank. Adjust the quantity based on desired aroma intensity.
6. Replace Cover: Securely place the top cover back onto the diffuser unit.
7. Connect Power: Plug the DC adapter into the power port on the diffuser, then plug the adapter into a wall outlet.

Operating Instructions

Power On/Off

• Press the power button (U) once to turn on the diffuser.
• Press and hold the power button to turn off the diffuser.

Diffuser Function (Mist & Timer)

• After powering on, the diffuser will start misting continuously.
• To set a timer, press the mist button repeatedly to cycle through the timer options: ON (continuous), 1H (1 hour), 2H (2 hours), 4H (4 hours). The corresponding indicator light will illuminate.
• The diffuser features an automatic shut-off function when the water level is low or runs out, ensuring safety.

Himalayan Salt Lamp Function (Light)

• Press the light button (☀) once to turn on the Himalayan salt lamp.
• Press the light button repeatedly to cycle through the 3 adjustable brightness levels: Strong, Breath (pulsating), and Weak.
• To turn off the salt lamp, continue pressing the light button until the light turns off.

Official Product Videos

Maintenance

Regular cleaning ensures optimal performance and longevity of your diffuser:

• Daily Cleaning: After each use, empty any remaining water from the tank. Wipe the inside of the water tank and the mist outlet with a clean, soft cloth.
• Weekly Cleaning: For a more thorough clean, especially if using essential oils regularly, use a cotton swab dipped in rubbing alcohol or white vinegar to gently clean the ultrasonic plate located at the bottom of the water tank.
• Salt Crystals: Periodically check the Himalayan salt rocks for any dust or debris. Wipe them gently with a dry cloth if needed. Do not wash the salt rocks with water.
• Exterior: Wipe the exterior of the diffuser with a soft, dry cloth.
• Ensure all parts are completely dry before reassembling and storing or using again.

Troubleshooting

If your diffuser is not functioning as expected, please refer to the following table for common issues and solutions:

Product Specifications

Warranty and Support

For warranty information or technical support, please contact SALKING customer service through the retailer's platform or visit the official SALKING website. Keep your purchase receipt as proof of purchase.