Yawpet Dog Training Collar User Manual

Product Overview

The Yawpet Dog Training Collar is an advanced electronic training system designed to help improve your dog's behavior through humane and effective methods. It features a remote control with a long range and a waterproof receiver collar, suitable for various dog breeds and sizes.

Key Features:

• 4 Training Modes: Includes standard beep, 1-3 levels of vibration, 1-99 levels of static shock, and a 10% shock boost for comprehensive training.
• Adjustable Fit: Suitable for dogs with neck sizes from 8 to 25 inches and weights from 8-110 lbs, featuring a soft and durable nylon strap.
• Extended Remote Range: Offers up to 2680 feet (approximately 817 meters) of remote control range for effective indoor and outdoor training.
• Security Keypad Lock: Prevents accidental activation of training modes, ensuring safe handling of the remote.
• IPX7 Waterproof Receiver: Allows the collar to be used in wet conditions, including swimming and bathing.
• Multi-Dog Support: Capable of training up to 4 dogs simultaneously with separate channels.
• Long-Lasting Battery: Fast-charging system provides up to 35 days of standby time for the collar and 45 days for the remote.

Safety Information

This dog training collar is intended for training purposes only. Please read and understand all instructions before use to prevent harm to your pet. Proper use is crucial for the safety and effectiveness of the device.

• Always read the user manual carefully before operating the collar.
• Ensure the collar is properly fitted to your dog's neck, with the prongs touching the skin. It should be snug but comfortable, allowing two fingers to fit between the strap and the dog's neck.
• For dogs with thicker fur, use a comb to part the fur at the contact points to ensure proper skin contact.
• Avoid leaving the collar on your dog for more than 10 hours a day to prevent skin irritation.
• Check your dog's neck skin condition every 2 hours when the collar is worn. If any signs of skin discomfort, redness, or sores are found, discontinue use immediately until the skin heals.
• Do not attach a leash to this training collar. Use a separate collar for leash attachment.
• Begin training with the lowest intensity levels (beep, then vibration, then static shock) and gradually increase only if necessary, observing your dog's response.
• Use the original charging cable for charging. If using an adapter, ensure its power output is not greater than 5V1A.

Package Contents

Upon opening your package, please verify that all the following components are included:

• Dog training collar receiver
• Remote control transmitter
• Adjustable nylon collar strap
• 2-in-1 USB charging cable
• Test light tool
• Long and short contact points (prongs)
• Silicone caps for contact points
• User Manual (this document)

Setup Guide

1. Charging the Devices:

Before first use, fully charge both the remote control and the collar receiver. Use the provided 2-in-1 charging cable. The indicator lights will show charging status and turn solid when fully charged.

Image: The 2-in-1 charging cable connected to both the remote and the collar receiver, highlighting the magnetic charging port on the receiver.

2. Pairing the Remote and Receiver:

The remote and receiver are usually pre-paired from the factory. If they are not paired or you need to re-pair them:

1. Turn on the remote control.
2. Turn on the receiver collar.
3. Press and hold the power button on the receiver collar until the indicator light flashes rapidly.
4. On the remote, press the "Pairing/Channel Select" button. The receiver's light will stop flashing and become solid, indicating successful pairing.
5. If training multiple dogs, select a different channel on the remote for each additional collar.

3. Fitting the Collar:

Proper fit is essential for the collar's effectiveness and your dog's comfort and safety.

1. Ensure the collar is positioned high on your dog's neck, close to the ears.
2. The contact points must make direct contact with your dog's skin.
3. Adjust the strap so it is snug but not overly tight. You should be able to fit two fingers comfortably between the collar strap and your dog's neck.
4. If your dog has long or thick fur, use the longer contact points provided, or trim the fur around the contact area to ensure proper contact.

Image: Diagram showing how to adjust the collar for proper fit and the different contact points for long/short fur.

Operating Instructions

Familiarize yourself with the remote control's layout and functions before beginning training.

Image: Detailed diagram of the remote control and receiver, highlighting buttons and features such as the digital display, keypad lock, and charging ports.

Training Modes:

The collar offers four distinct training modes:

• Beep Mode: Emits an audible tone. Often used as a warning or positive reinforcement signal.
• Vibration Mode (1-3 Levels): Delivers a gentle vibration. Adjustable intensity for different dog sensitivities.
• Static Shock Mode (1-99 Levels): Provides a static stimulation. Start at the lowest level and increase gradually.
• Shock Boost (10% Higher): A slightly stronger static stimulation for situations requiring more emphasis.

Image: Visual representation of the four training modes and their respective icons on the remote.

Remote Control Functions:

• Range: The remote operates effectively up to 2680 feet, allowing for training in various environments.
• Security Lock: Utilize the keypad lock switch on the side of the remote to prevent accidental button presses, especially when carrying it in a pocket or bag.
• Channel Selection: Use the channel button to switch between collars if training multiple dogs.

Image: Illustration demonstrating the 2680ft remote range and a close-up of the security keypad lock on the remote.

Waterproof Feature:

The receiver collar is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This allows your dog to swim, play in the rain, or be bathed while wearing the collar.

Image: Depicts dogs swimming, bathing, and playing in the rain, showcasing the collar's IPX7 waterproof capability.

Care and Maintenance

• Regularly inspect the collar and contact points for any signs of wear or damage.
• Clean the collar and receiver with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Ensure the charging port is dry before connecting the charging cable.
• Store the device in a cool, dry place when not in use.
• Periodically check your dog's neck for any irritation or sores caused by prolonged wear.

Troubleshooting

If you encounter issues with your Yawpet Dog Training Collar, please refer to the following common solutions:

• Collar not responding: Ensure both the remote and receiver are charged and turned on. Re-pair the devices if necessary. Check that the collar is properly fitted and the contact points are touching the dog's skin.
• Weak or no stimulation: Check battery levels. Ensure contact points are clean and making good contact with the skin. Increase the intensity level gradually.
• Remote not working: Check remote battery. Ensure it's not in keypad lock mode.
• Skin irritation: Remove the collar immediately. Allow the skin to heal. Ensure proper fit and wear time (no more than 10 hours a day). Consider using silicone caps over the contact points.

For further assistance, please contact Yawpet customer support.

Technical Specifications

Warranty and Support

Yawpet offers a 2-Year Free Replacement Promise for this product, demonstrating our commitment to quality and customer satisfaction. If you experience any issues with your dog training collar within two years of purchase, please contact our customer support for assistance.

For technical support, warranty claims, or general inquiries, please visit the official Yawpet website or contact us via the details provided in your product packaging.