Amesias WP8572720
Amesias WP8572720 Washer Start Capacitor User Manual
Model: WP8572720
Brand: Amesias
1. Introduction
This manual provides essential information for the Amesias WP8572720 Washer Start Capacitor. It includes product overview, compatibility details, installation guidelines, specifications, and important safety instructions. Please read this manual thoroughly before attempting installation or use.

Image 1: Side view of the Amesias WP8572720 Washer Start Capacitor, showing its cylindrical black casing and electrical terminals.
2. Compatibility and Replacement Information
The WP8572720 Start Capacitor is designed for specific Whirlpool, Kenmore, and KitchenAid washing machine models. It is crucial to verify compatibility with your appliance's model number before purchase and installation.

Image 2: A visual reminder to check your appliance's model number for compatibility. Many replacement parts may look similar but are not interchangeable.
2.1 Replaces Part Numbers:
This capacitor replaces the following part numbers:
- 3949170
- 1180742
- 3348058
- 3350419
- 3949168
- 3957281
- 661605
- 661607
- 8572718
- AH982271
- EA982271
- PS982271
2.2 Compatible Washer Models:
This part is compatible with a wide range of models. Please consult your appliance's service manual or the manufacturer's website to confirm compatibility with your specific model. Examples of compatible models include (but are not limited to):
- 7MMSE7999TW0
- MTW5900TW0
- MTW5920TW0
- MTW5921TW0
- MTW5940TW0
- 1CWTW5800SG0
- 4LA9300XTW0
- 4LBR7255AN0
- 4LBR7255AW0
- 7LSC9355BN0
- 7MGST9679PL0
- 7MGST9679PW0
- 7MGST9679PW1
- 7MLSQ9659PG1
- 7MLSQ9659PW0
- 7MLSQ9659PW1
- 7MMSE7999TW0
- 7MWS89700SM0
- 7MWT97900SM0
- 7MWT97920SG0
- 7MWT97920SW0
- 7MWT97940SB0
- 7MWT97940SW0
- CAWS966RQ0
- CAWS966RQ1
- GSL9365EQ0
- GSL9365EQ1
- GSL9365EQ2
- GSL9365EZ0
- GSL9365EZ1
- GSL9365EZ2
- GSN2000HQ0
- GSN2000HZ0
- GSQ9300EQ0
- GSQ9300EZ0
- GSQ9310HQ0
- GSQ9310HZ0
- GSQ9340EQ0
- GSQ9364HQ0
- GSQ9364HZ0
- GSQ9611KQ0
- GSQ9611KQ1
- GSQ9611KQ2
- GSQ9611KT0
- GSQ9611KT1
- GSQ9611KT2
- GSQ9612KQ0
- GSQ9612KQ1
- GSQ9612KQ2
- GSQ9612KT0
- GSQ9612KT1
- GSQ9612KT2
- GSQ9631LG0
- GSQ9631LL0
- GSQ9631LL1
- GSQ9631LW0
- GSQ9631LW1
- GSQ9632LL0
- GSQ9632LL1
- GSQ9632LQ0
- GSQ9632LW0
- GSQ9632LW1
- GSQ9633LL0
- GSQ9633LL1
- GSQ9633LW0
- GSQ9633LW1
- GSQ9669LG0
- GSQ9669LG1
- GSQ9669LW0
- GSQ9669LW1
- GST9344EQ0
- GST9344EZ0
- GST9630PG0
- GST9630PG1
- GST9630PG2
- GST9630PG3
- GST9630PL0
- GST9630PL1
- GST9630PL2
- GST9630PL3
- GST9630PW0
- GST9630PW1
- GST9630PW
- GSQ9340EQ1
- GSQ9340EZ0
- GSQ9340EZ1
- GSQ9344EQ0
- GSQ9344EZ0
3. What's in the Box
Upon opening the package, you should find the following item:
- 1x Amesias WP8572720 Washer Start Capacitor

Image 3: Top view of the Amesias WP8572720 Washer Start Capacitor, showing the terminal connections.
4. Product Specifications
| Feature | Detail |
|---|---|
| Model Number | WP8572720 |
| Product Dimensions | 5 x 4 x 4 inches |
| Material | Aluminum |
| Shape | Cylindrical |
| Mounting Type | Snap-In Mount |
| Manufacturer | Amesias |
5. Important Safety Information
WARNING: Risk of electric shock. Disconnect power before servicing.
- Always disconnect the appliance from its power source before attempting any repairs or installations.
- Capacitors can store an electrical charge even after power is disconnected. It is essential to discharge the capacitor safely before handling. If you are unsure how to do this, seek professional assistance.
- Wear appropriate personal protective equipment (PPE), such as insulated gloves and safety glasses.
- If you are not comfortable performing electrical repairs, it is highly recommended to consult a qualified appliance technician.
- Ensure all connections are secure and correctly wired according to the appliance's wiring diagram.
6. Installation Guidelines
Installing a washer start capacitor involves working with electrical components and should only be performed by individuals with appropriate technical knowledge and experience. Incorrect installation can lead to appliance damage, personal injury, or fire.
6.1 General Steps (Consult Appliance Service Manual for Specifics):
- Disconnect Power: Unplug the washing machine from the wall outlet or turn off the circuit breaker supplying power to the appliance.
- Access Capacitor: Locate and access the existing start capacitor within your washing machine. This typically involves removing the back panel or control panel, depending on your model.
- Discharge Old Capacitor: Safely discharge the old capacitor using an insulated screwdriver or a resistor. Do not skip this step.
- Note Wiring: Carefully note or photograph the wiring connections to the old capacitor before disconnecting them.
- Remove Old Capacitor: Disconnect the wires and remove the old capacitor from its mounting bracket.
- Install New Capacitor: Mount the new Amesias WP8572720 capacitor in the same location and connect the wires exactly as they were on the old unit. Ensure connections are tight and secure.
- Reassemble: Reattach any panels or covers removed during the process.
- Restore Power: Plug the washing machine back in or turn on the circuit breaker.
- Test: Run a short wash cycle to ensure the washer operates correctly.
This is a general guide. Always refer to your specific washing machine's service manual for detailed, model-specific instructions and diagrams.
7. Operating Instructions
The start capacitor is an internal component of your washing machine and does not require direct user operation. Once correctly installed, it functions automatically as part of the washer's motor starting circuit. If your washing machine is not starting or operating correctly after capacitor replacement, refer to the troubleshooting section.
8. Maintenance
The Amesias WP8572720 Washer Start Capacitor is a sealed unit and requires no routine maintenance. Regular inspection of your washing machine's internal components during other service or cleaning can help identify any potential issues with the capacitor, such as bulging or leakage, which would indicate a need for replacement.
9. Troubleshooting
If your washing machine exhibits issues after replacing the start capacitor, consider the following:
- Washer Not Starting:
- Ensure power is connected and the circuit breaker is on.
- Double-check all wiring connections to the capacitor for tightness and correct placement.
- Verify that the replacement capacitor is the correct part number for your specific washer model.
- The motor itself may be faulty, or there could be an issue with other electrical components.
- Humming Noise, No Spin:
- This can indicate a motor attempting to start but failing, often due to a faulty capacitor or motor. If the capacitor is new, re-check connections.
- Burning Smell:
- Immediately disconnect power to the appliance. This could indicate an electrical short or overheating component. Do not attempt to operate the washer until the issue is resolved by a qualified technician.
For complex issues, it is always best to consult a professional appliance repair technician.
10. Customer Support
For further assistance, compatibility questions, or technical support regarding the Amesias WP8572720 Washer Start Capacitor, please contact your retailer or the manufacturer directly. When contacting support, please have your product model number (WP8572720) and your washing machine's full model number readily available.
You can often find additional resources and troubleshooting guides on the manufacturer's or your appliance brand's official website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.