1. Introduction
Image: The AlfaBot WS-24 Cordless Electric Spin Mop with included mop pads.
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your AlfaBot WS-24 Cordless Electric Spin Mop. Please read this manual thoroughly before first use and retain it for future reference.
2. Package Contents
Verify that all items listed below are included in your package:
- Electric Mop Unit
- Handle
- Extendable Pipe
- AC Adapter
- Measuring Cup
- Mop Pads (Grey and White types)
- User Manual
Image: All components included in the AlfaBot WS-24 Electric Spin Mop package, including the mop unit, handle, extendable pipe, AC adapter, measuring cup, and various mop pads.
3. Setup and Assembly
- Attach the Handle: Connect the handle to the extendable pipe. Ensure it clicks securely into place.
- Attach the Extendable Pipe: Connect the assembled handle and pipe to the main mop unit.
- Adjust Length: The handle length can be adjusted from 37.4 inches to 48.4 inches. Press the adjustment button on the extendable pipe and slide it to your desired height. Release the button to lock.
Image: Illustration of the adjustable handle length, showing minimum (37.4") and maximum (48.4") heights for comfortable use.
- Attach Mop Pads: Secure the desired mop pads to the bottom of the mop head using the hook-and-loop fasteners. Two types of pads are included: grey for daily cleaning and waxing, and white for deep cleaning and hair removal.
Image: Close-up of the two types of mop pads (grey and white) and how they attach to the mop head, detailing their specific uses.
- Initial Charging: Before first use, fully charge the mop for approximately 4 hours using the provided AC adapter. The charging indicator light will change when fully charged. A full charge provides 40-50 minutes of run time.
Image: The mop connected to its charger, illustrating the 4-hour charging time and 50-minute run time.
4. Operating Instructions
- Fill Water Tank: Open the water tank cap and use the measuring cup to fill the 180ml tank with clean water or a suitable floor cleaning solution. Do not overfill.
- Power On: Press the power button on the handle to start the mop. The dual spin heads will begin rotating at 150 revolutions per minute.
Image: Diagram showing the dual spin heads rotating at 150 r/min, with before and after cleaning examples on a wooden floor.
- Water Spray Function: Press the water spray button on the handle to dispense water or cleaning solution onto the floor. This is useful for wet cleaning and tackling stubborn stains.
- LED Headlight: The integrated LED headlight illuminates the cleaning path, making it easier to see dirt and debris in dark areas, under furniture, or in corners.
Image: The mop demonstrating its water spray function and the LED headlight illuminating the floor in a dark area.
- Maneuvering: The mop is designed to be self-propelled. Guide it gently across the floor. The mop head can swivel 180° horizontally and 90° vertically, allowing access to hard-to-reach spaces and under furniture.
Image: Illustrations showing the mop head's 180-degree horizontal swivel and 90-degree vertical pivot, demonstrating its ability to clean under low furniture.
- Suitable Floor Types: This electric mop is suitable for various hard floor surfaces, including hardwood, tile, laminate, marble, and vinyl.
Image: Visual representation of the mop cleaning different floor types (wooden, marble, tile) and removing various stains like footprints, sebum, dust, and bacteria.
- Power Off: Press the power button again to turn off the mop.
5. Maintenance
- Clean Mop Pads: After each use, remove the mop pads and wash them. They are reusable and can be machine washed.
- Empty Water Tank: Empty any remaining water or cleaning solution from the tank after each use to prevent residue buildup.
- Wipe Down Unit: Use a damp cloth to wipe the exterior of the mop unit to remove any dirt or dust. Do not immerse the unit in water.
- Storage: Store the mop in a dry place. The mop is designed to be self-standing for convenient storage.
6. Troubleshooting
If you encounter issues with your AlfaBot WS-24 Mop, please refer to the following common solutions:
- Mop Not Turning On:
- Ensure the battery is fully charged.
- Check that all components (handle, extendable pipe, mop unit) are securely connected.
- Water Spray Not Working:
- Verify the water tank is filled.
- Check for any blockages in the spray nozzle.
- Reduced Spinning Power:
- The battery may be low; recharge the unit.
- Ensure mop pads are clean and not excessively saturated or clogged with debris.
- Mop Leaking:
- Ensure the water tank cap is securely closed.
- Do not overfill the water tank.
If problems persist, please contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | AlfaBot |
| Model Name | WS-24 |
| Special Features | Cordless, Lightweight, Water Spray, LED Headlight |
| Surface Recommendation | Hardwood Floor, Tile Floor, Laminate, Marble, Vinyl |
| Wattage | 30 watts |
| Item Weight | 1.6 Kilograms (3.52 pounds) |
| Water Tank Volume | 180 Milliliters |
| Power Source | Battery Powered (1 Lithium Ion battery included) |
| Voltage | 3.7 Volts (AC) |
| Product Dimensions | 12.99"D x 6.3"W x 48.82"H |
| Assembly Required | Yes |
8. Warranty Information
The AlfaBot WS-24 Cordless Electric Spin Mop comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty card included in your package or contact AlfaBot customer support.
9. Customer Support
For any questions, technical assistance, or warranty claims, please contact AlfaBot customer support. You can find contact information on the official AlfaBot website or through the retailer where you purchased the product.
Please visit the AlfaBot Store for more information and products.
