1. Product Overview
The GEARELEC Motorcycle Bluetooth Headset is designed to provide clear communication and entertainment for riders. Featuring an upgraded Bluetooth 5.1 chip, it offers stable connections and a long intercom range of up to 1500 meters. The headset incorporates a triple noise reduction system and 40mm stereo speakers for crystal-clear sound quality, even at high speeds. Its user-friendly design ensures safe and efficient operation while riding.
2. Package Contents
Before beginning installation, please verify that all items are present in the package:
- 2 x Headsets
- 2 x Hard Mics
- 2 x Soft Mics
- 4 x Adhesive Tapes
- 2 x Charging Cables
- 2 x Metal clips
- 2 x Screwdrivers
- 4 x Screws
- 3m Foam Pad for Microphone x4
- 3m Foam Pad for Speaker x8
- Quick-release Clip x2
3. Setup Guide
3.1. Headset Installation on Helmet
Follow these steps to properly install the headset on your helmet:
- Mounting Clamp: Secure the mounting clamp to the helmet.
- Positioning: Fit the clamp to the proper position on the left side of the helmet.
- Aligning Host: Align the clamp slot and install the FX host onto the clamp.
- Earphone Velcro Pads: Stick the earphone velcro pads at the ear position inside the helmet.
- Headphones: Stick the headphones on the Velcro pads.
- Earphone Jack: Plug the earphone into the FX earphone jacket.
3.2. Bluetooth Pairing with Mobile Phone
To connect your headset to your mobile phone:
- Enter Pairing Mode: Long press the headset power button until the indicator flashes red and blue alternately. This indicates the headset is in pairing state.
- Connect: On your mobile phone, open Bluetooth settings and find "DK01" in the list of available devices. Click to connect.
3.3. Intercom Pairing Between Two Units
To establish intercom communication between two GEARELEC headsets:
- Enter Pairing Mode: On both units, press and hold the power buttons until the indicators become red and blue alternate flashing lights.
- Initiate Pairing: Press the power button of either unit. Both units will begin to pair.
- Pairing Complete: When the indicators of both units become slow flashing blue lights, it means the pairing is complete.
4. Operating Instructions
4.1. Basic Functions
- Power On/Off: Long press the power button.
- Music Play/Pause: Press the power button once.
- Next Song: Press the '+' button.
- Previous Song: Press the '-' button.
- Volume Up: Long press the '+' button.
- Volume Down: Long press the '-' button.
- Answer/Reject Calls: Use the dedicated phone button.
4.2. Indicator Light Description
The headset features indicator lights to show its status:
- Red Indicator Light: When charging, the red light is on. It automatically turns off when the battery is fully charged.
- Blue Indicator Light: The blue light flashes intermittently when the mobile phone is successfully connected.
- Red and Blue Flashing Alternately: This indicates the headset is waiting for a Bluetooth connection from the mobile phone. After a successful connection, the headset lights up blue.
5. Care and Maintenance
To ensure the longevity and optimal performance of your GEARELEC Bluetooth Headset, follow these care guidelines:
- Water Resistance: The headset has an IP65 protection level, making it resistant to water splashes and dust. While it can withstand rain, avoid submerging it in water.
- Temperature Range: The headset is designed to operate in a wide temperature range from -40℃ to 60℃. Avoid exposing it to extreme temperatures outside this range for prolonged periods.
- Cleaning: Use a soft, damp cloth to clean the exterior of the headset. Do not use harsh chemicals or abrasive cleaners.
- Storage: When not in use for extended periods, store the headset in a cool, dry place away from direct sunlight.
- Charging: Always use the provided Type-C charging cable. Ensure the charging port is dry before connecting the cable.
6. Troubleshooting
If you encounter issues with your GEARELEC Motorcycle Bluetooth Headset, consider the following general advice:
- No Power: Ensure the battery is charged. Connect the headset to the charging cable and allow it to charge for at least 30 minutes before attempting to power on again.
- Pairing Issues: If the headset does not pair with your phone or another unit, ensure both devices are in pairing mode and within range. Try restarting both the headset and the device you are trying to pair with. Clear previous Bluetooth connections on your phone if necessary.
- No Sound/Poor Sound Quality: Check the volume levels on both the headset and the connected device. Ensure the speakers are correctly positioned inside the helmet and that the microphone is not obstructed. Verify the headset is fully charged.
- Intercom Disconnection: If the intercom frequently disconnects, ensure both units are within the specified 1500m range and there are no major obstructions. Re-pair the units if the issue persists.
For persistent issues or more detailed troubleshooting, please refer to the contact information in the Warranty & Support section.
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | Gearelec E3 |
| Connectivity Technology | Wireless (Bluetooth 5.1) |
| Headphones Jack | Type-C |
| Charging Time | 2.5 Hours |
| Battery Life (Music/Calls) | 30 Hours |
| Standby Capacity | 500 Hours |
| Intercom Range | 1500M |
| Water Resistance Level | IP65 |
| Operating Temperature | -40℃ to 60℃ |
| Item Weight | 3.53 ounces (100 Grams) |
| Product Dimensions | 3 x 2 x 1 inches |
| Noise Control | Active Noise Cancellation |
8. Warranty and Support
GEARELEC is committed to providing a satisfactory experience for its customers. While specific warranty terms are not detailed in this manual, the manufacturer stands behind its product.
If you have any questions, suggestions, or require technical assistance regarding the use or functionality of your GEARELEC Motorcycle Bluetooth Headset, please contact the manufacturer directly through their official channels or the retailer from whom you purchased the product. They will serve you wholeheartedly to resolve any concerns.
