Tribesigns Semi-Circle End Table (Model HQ-U0173-P) Instruction Manual

Introduction

Welcome to your new Tribesigns Semi-Circle End Table. This manual provides essential information for assembly, safe use, and maintenance of your table. Please read these instructions carefully before beginning assembly and retain them for future reference.

Safety Information

• To prevent tipping, ensure the table is placed against a wall or other stable object.
• Do not place heavy items on the table that could cause it to tip over. The maximum weight recommendation is 35.3 pounds.
• Keep small parts away from children during assembly.
• Do not stand or sit on the table.
• Use on a level surface to ensure stability.

Package Contents

Please verify that all components are present before beginning assembly.

• Tabletop (Engineered Wood)
• Metal Frame Components
• Adjustable Feet
• Assembly Guide
• Installation Tool (e.g., Allen wrench)

Assembly Instructions

Assembly is simple and typically requires one person. A screwdriver may be needed (not included).

1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Identify all parts according to the included assembly guide.
3. Attach the metal frame components as per the diagrams in the assembly guide. Ensure all screws are finger-tightened initially.
4. Secure the tabletop to the assembled frame.
5. Once all parts are connected, fully tighten all screws using the provided installation tool. Do not overtighten.
6. Install the adjustable feet into the bottom of the metal frame.

Usage Guidelines

• Place the semi-circle end table against a sofa, couch, or wall for optimal stability.
• Adjust the footpads to ensure the table is level and stable on uneven floors. This also protects your floor from scratches.
• The table is designed for indoor use only.
• The maximum weight recommendation is 35.3 pounds. Do not exceed this limit.

Care and Maintenance

• To clean, simply wipe the table with a damp cloth.
• Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish.
• Regularly check and tighten all screws to maintain stability.
• Protect the tabletop from excessive moisture and direct heat.

Troubleshooting

Table is wobbly or unstable:

Ensure the table is placed against a stable object like a sofa or wall.

Adjust the footpads on the bottom of the metal frame to level the table on uneven surfaces. Rotate them clockwise or counter-clockwise until stability is achieved.

Verify that all assembly screws are securely tightened.

Product Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Tribesigns website.

You can also contact customer service via the platform where you purchased this product.