1. Introduction
The Vento VIVI-DC is a 10-inch wall mount swivel fan designed to enhance airflow in various indoor spaces. Its unique triaxial design and folding arm allow for versatile positioning and efficient air circulation. This manual provides essential information for the safe installation, operation, and maintenance of your VIVI-DC fan.
Figure 1: Front view of the Vento VIVI-DC fan, showcasing its compact design and walnut finish.
2. Safety Instructions
Please read all safety instructions carefully before installation and operation to prevent injury or damage.
- Always unplug the fan from the power source before cleaning, maintenance, or when not in use.
- Do not insert fingers or any objects through the fan guard when the fan is operating.
- Ensure the fan is mounted securely to a wall stud or appropriate anchor points to prevent it from falling.
- This fan is designed for indoor use only. Do not use it outdoors or in wet environments.
- Keep the power cord away from heated surfaces and sharp edges.
- Do not operate the fan with a damaged cord or plug. Contact customer support for assistance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Package Contents
Verify that all components are present in the package:
- Fan Unit (Shield, Blades, Fan Housing)
- Mounting Bracket
- Remote Control
- Remote Transmitter Holder
- DC Power Supply
- Pull Chain
- Screw Pack (4 x Screws, 4 x Plastic Wall Plugs, 1 x Pull Chain Extension)
- Screws for Transmitter Holder (2 x Screws)
Figure 2: Exploded view showing all included components and accessories for the VIVI-DC fan.
4. Setup and Installation
Follow these steps for proper installation of your VIVI-DC wall mount fan.
4.1 Tools Required (Not Included)
- Drill
- Phillips Head Screwdriver
- Pencil
- Measuring Tape
4.2 Mounting the Fan
- Select Location: Choose a suitable indoor wall location, preferably near a power outlet. Ensure the mounting surface can support the fan's weight (approximately 7 lbs).
- Mark Drilling Points: Hold the mounting bracket against the wall at the desired height. Use a pencil to mark the positions for the four mounting screws.
- Drill Pilot Holes: Drill pilot holes at the marked positions. If mounting into drywall, insert the plastic wall plugs into the pilot holes.
- Secure Mounting Bracket: Align the mounting bracket with the pilot holes and secure it to the wall using the four screws provided.
- Attach Fan Unit: Carefully attach the fan unit to the secured mounting bracket. Ensure it clicks or locks into place firmly.
- Connect Power: Plug the DC power supply into the fan unit and then into a standard wall outlet.
- Install Remote Holder (Optional): Mount the remote transmitter holder to a convenient location using the two smaller screws provided.
Figure 3: Dimensional diagram of the VIVI-DC fan, useful for planning installation space.
5. Operation
The VIVI-DC fan can be controlled using the included remote control or the integrated pull chain.
5.1 Remote Control
The remote control allows you to power the fan on/off and adjust its speed settings.
Figure 4: The remote control for the VIVI-DC fan, featuring power and speed adjustment buttons.
- Power Button (⏻): Press once to turn the fan on or off.
- Speed Button (Low Speed): Press to set the fan to low speed.
- Speed Button (High Speed): Press to set the fan to high speed.
5.2 Pull Chain
The pull chain provides an alternative method for basic fan control.
- Pull the chain once to turn the fan on (default to low speed).
- Pull the chain again to switch to high speed.
- Pull the chain a third time to turn the fan off.
5.3 Adjusting Fan Angle
The VIVI-DC fan features a triaxial design and a swivel arm, allowing you to manually adjust the fan head to direct airflow as needed. Gently pivot the fan head and arm to achieve the desired angle.
6. Maintenance
Regular cleaning will help maintain the fan's performance and appearance.
- Always unplug the fan before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
- To clean the fan blades, carefully remove the front grill (if detachable, refer to assembly diagram for guidance). Wipe the blades with a soft cloth. Ensure all parts are dry before reassembling and operating the fan.
- Do not immerse the fan or any electrical components in water or other liquids.
7. Troubleshooting
If you encounter issues with your VIVI-DC fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | No power supply Remote control battery depleted | Ensure the DC power supply is securely plugged into the fan and a working outlet. Replace the remote control battery. |
| Fan is noisy or vibrates excessively | Loose components Obstruction in fan blades | Ensure the fan unit is securely attached to the mounting bracket. Check for any loose screws. Unplug the fan and carefully remove any debris or obstructions from the blades. |
| Remote control not working | Battery depleted Obstruction between remote and fan Remote not paired (if applicable) | Replace the remote control battery. Ensure there is a clear line of sight between the remote and the fan's receiver. Refer to specific pairing instructions if provided with the remote (not typically required for this model). |
8. Specifications
- Model: VIVI-DC
- Brand: Vento
- Fan Diameter: 10 inches
- Product Dimensions (D x W x H): 10.08" x 12.9" x 14.33"
- Item Weight: 7 pounds
- Power Source: DC Powered
- Wattage: 12 watts
- Air Flow Capacity: 268 Cubic Feet Per Minute (CFM)
- Noise Level: 48 Decibels (dBa)
- Control Method: Remote Control, Pull Chain
- Number of Power Levels: 2 (Low, High)
- Indoor/Outdoor Usage: Indoor Only
- Special Features: Adjustable Tilt, Remote Controlled, Folding Arm, Energy Efficient DC Motor
9. Warranty and Support
The Vento VIVI-DC fan comes with the following warranty:
- DC Motor: 18-month limited manufacturer's warranty.
- Other Fan Parts: 1-year limited manufacturer's warranty.
For warranty claims, technical support, or replacement parts, please contact Vento customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and model number (VIVI-DC) ready when contacting support.
