MIEBELY Lamborghini Sián Roadster 1:12 Scale Remote Control Car Instruction Manual

1. Introduction

Thank you for purchasing the MIEBELY Lamborghini Sián Roadster 1:12 Scale Remote Control Car. This officially licensed replica offers a realistic driving experience with detailed design and advanced features. Please read this manual thoroughly before operation to ensure proper use and maintenance.

2. Safety Information

• Not suitable for children under 6 years old. Adult supervision is recommended.
• Do not operate the vehicle near people, pets, or obstacles to prevent accidents.
• Avoid operating in wet conditions or on rough terrain to prevent damage to the vehicle's electronics.
• Keep fingers, hair, and loose clothing away from moving wheels and parts.
• Always turn off the vehicle and remote control when not in use.
• Use only the provided charging cable and battery. Do not attempt to charge non-rechargeable batteries.
• Dispose of batteries responsibly according to local regulations.

3. Package Contents

• 1 x MIEBELY Lamborghini Sián Roadster Remote Control Car
• 1 x Remote Control Transmitter
• 1 x 7.4V 900mAh Lithium Ion Rechargeable Battery (for car)
• 1 x USB Charging Cable
• 1 x Instruction Manual
• Note: 2 x AA batteries for the remote control are not included.

Image: The remote control car, its remote, and the rechargeable battery.

4. Setup

4.1 Charging the Car Battery

1. Connect the 7.4V 900mAh Lithium Ion battery to the USB charging cable.
2. Plug the USB charging cable into a compatible USB power source (e.g., computer, USB wall adapter).
3. The indicator light on the USB charger will show the charging status. Refer to the charger's instructions for specific light indications.
4. Charging typically takes approximately 3-4 hours. Do not overcharge the battery.

4.2 Installing the Car Battery

1. Locate the battery compartment on the underside of the car.
2. Use a screwdriver to open the battery compartment cover.
3. Connect the charged 7.4V 900mAh Lithium Ion battery to the car's power connector.
4. Carefully place the battery inside the compartment and close the cover, securing it with the screw.

Image: Illustration of battery installation in the car's chassis.

4.3 Installing Remote Control Batteries

1. Locate the battery compartment on the remote control.
2. Open the battery cover.
3. Insert 2 x AA batteries, ensuring correct polarity (+/-).
4. Close the battery cover securely.

4.4 Adjusting Remote Control Handle

The remote control handle can be adjusted for both left-handed and right-handed users.

1. Gently pull the steering wheel component off the remote control.
2. Re-insert the steering wheel component into the desired side of the remote control until it clicks into place.

Image: The remote control with its detachable steering wheel, illustrating how to switch its position.

4.5 Pairing Remote Control

1. Turn on the remote control. The indicator light will flash.
2. Turn on the car using the power switch located on its underside.
3. The remote control indicator light will become solid, indicating successful pairing.

4.6 Adjusting Steering Trim

If the car does not drive straight, you can adjust the steering trim on the underside of the car.

1. Locate the steering trim dial on the underside of the car, near the front wheels.
2. While driving the car, slowly adjust the dial left or right until the car maintains a straight path.

Image: Close-up of the steering trim adjustment mechanism on the car's underside.

5. Operating

5.1 Basic Controls

• Forward/Backward: Pull the trigger on the remote control towards you to move forward. Push the trigger away from you to move backward.
• Left/Right: Rotate the steering wheel on the remote control left or right to steer the car in the corresponding direction.

5.2 Driving Tips

• For optimal performance, operate the car on smooth, flat surfaces.
• Practice gentle steering and throttle control to master drifts and turns.
• The 2.4Ghz radio control provides a stable connection and allows for multiplayer racing without interference.

Image: Two remote control cars racing side-by-side, highlighting the 2.4Ghz anti-interference feature.

5.3 LED Lights Functionality

The car features functional LED headlights and taillights for a realistic driving experience.

• Headlights illuminate when driving forward.
• Taillights illuminate when driving backward.

Image: Detailed view of the car's front, showcasing the exquisite bodywork and LED headlights.

Image: Detailed view of the car's rear, highlighting the domineering car tail and LED taillights.

6. Maintenance

6.1 Cleaning

• Wipe the car with a soft, dry cloth after each use to remove dust and debris.
• Do not use water or chemical cleaners, as this may damage electronic components.

6.2 Storage

• Store the car and remote control in a cool, dry place away from direct sunlight and extreme temperatures.
• Remove all batteries from the car and remote control if storing for extended periods to prevent leakage.

6.3 Battery Care

• Always allow the car battery to cool down before recharging.
• Do not leave batteries unattended while charging.
• If the battery becomes hot during use or charging, discontinue use immediately.

7. Troubleshooting

8. Specifications

• Brand: MIEBELY
• Model: lambo 27112
• Scale: 1:12
• Car Battery: 7.4V 900mAh Lithium Ion (included)
• Remote Control Batteries: 2 x AA (not included)
• Max Speed: 12 Km/h (approximately 7.5 mph)
• Control Frequency: 2.4Ghz
• Control Range: Up to 200 feet
• Material: Thickened, non-toxic ABS
• Product Dimensions: 15 x 6.57 x 4.24 inches
• Item Weight: 2.07 pounds
• Recommended Age: 6 years and up

Image: The remote control car with its 1:12 scale and approximate dimensions.

9. Warranty and Support

For any questions, concerns, or support needs regarding your MIEBELY Lamborghini Sián Roadster Remote Control Car, please contact MIEBELY customer service through the retailer's platform or visit the official MIEBELY website for assistance.

Please retain your proof of purchase for any warranty claims.