LIANGSTAR Laptop Cooling Pad User Manual

Introduction

Thank you for choosing the LIANGSTAR Laptop Cooling Pad. This device is designed to enhance your laptop's performance and longevity by providing efficient cooling and an ergonomic viewing angle. Featuring four high-speed fans, adjustable RGB lighting, and multiple height settings, this cooling pad is compatible with laptops ranging from 12 to 17.3 inches. Please read this manual carefully to ensure proper setup and operation.

Package Contents

• LIANGSTAR Laptop Cooling Pad
• USB-A to USB-A Power Cable
• User Manual (this document)

Setup Instructions

1. Unpack the Cooling Pad: Carefully remove the cooling pad and all accessories from the packaging.
2. Position the Cooling Pad: Place the cooling pad on a stable, flat surface.
3. Adjust Height (Optional): If desired, adjust the ergonomic stand to one of the 7 available height settings by lifting the rear support legs and engaging them with the corresponding notches.
   

   Image: The cooling pad features 7 adjustable height settings for ergonomic comfort. Adjust the rear support legs to achieve your preferred angle.

4. Deploy Anti-Slip Baffles: Pull up the two small baffles located at the front edge of the cooling pad. These will prevent your laptop from sliding off.
   

   Image: Detail of the anti-slip baffle being raised to secure the laptop in place.
5. Place Your Laptop: Carefully place your laptop on the cooling pad, ensuring it rests securely against the deployed anti-slip baffles. The cooling pad supports laptops from 12 to 17.3 inches.
   

   Image: A laptop positioned on the cooling pad, showing how it fits within the supported size range.

6. Connect Power: Use the provided USB-A to USB-A cable to connect the cooling pad to a USB port on your laptop or a compatible USB power adapter (not included). The cooling pad features two USB ports; one is for power input, and the other can be used for connecting other devices.
   

   Image: The cooling pad's two USB ports. One port is for power input, and the other can be used for connecting peripherals or charging low-power devices.

Operating Instructions

Fan Control

• The cooling pad is equipped with controls to adjust fan speed and activate specific fan groups. Refer to the control panel on the cooling pad for specific buttons.
• Power On/Off: Press the power button to turn the fans on or off.
• Fan Mode Adjustment: The cooling pad allows you to operate all four fans simultaneously or select specific fan groups (e.g., two fans) to run independently. Use the designated fan mode button to cycle through available modes.
• Fan Speed Adjustment: Use the fan speed control buttons (often marked with '+' and '-') to increase or decrease the fan speed. This allows you to optimize cooling performance and noise levels.
  

  Image: The four high-speed fans provide strong airflow for efficient heat dissipation, keeping your laptop cool.

RGB Lighting Control

• The cooling pad features RGB breathing lights on both sides.
• Cycle RGB Modes: Press the RGB light button to cycle through the 7 available lighting effect modes.
• Turn Off RGB Lights: The RGB lights can be turned off independently by pressing and holding the RGB light button or cycling through all modes until they switch off.
  

  Image: The cooling pad offers 7 distinct RGB lighting effect modes, which can be customized or turned off as preferred.

Maintenance

• Cleaning: Regularly clean the metal mesh surface and fan blades to prevent dust accumulation, which can hinder airflow and cooling efficiency. Use a soft, dry cloth or compressed air.
• Storage: When not in use for extended periods, disconnect the cooling pad and store it in a cool, dry place away from direct sunlight.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact LIANGSTAR customer service directly. Contact details can typically be found on the official LIANGSTAR website or through your purchase platform.