1. Introduction
The Tusk Lithium Pro Battery TLFP-14BR is a high-performance lithium iron phosphate (LiFePO4) battery designed for motorcycles, ATVs, and UTVs. This battery offers significant advantages over traditional lead/acid batteries, including reduced weight, extended service life, and environmental benefits due to the absence of corrosive liquids or toxic heavy metals.
This manual provides essential information for the safe installation, operation, and maintenance of your Tusk Lithium Pro Battery. Please read it thoroughly before use.
Image 1.1: Front view of the Tusk Lithium Pro Battery TLFP-14BR, showcasing the brand and model information.
2. Safety Information
Observe the following safety precautions to prevent injury or damage to the battery and vehicle:
- Do not short-circuit batteries or reverse polarity. Incorrect connection can cause severe damage.
- Do not disassemble, deform, or modify batteries. This can lead to internal damage and hazardous conditions.
- Do not overcharge or overdischarge batteries. Use only chargers specifically designed for lithium iron phosphate (LiFePO4) batteries.
- DO NOT use a charger if it has an automatic "desulfation mode" that cannot be turned off. Desulfation modes are designed for lead/acid batteries and can damage LiFePO4 batteries.
- Keep batteries out of the reach of children.
- Store batteries in a cool, dry, well-ventilated area. Avoid extreme temperatures.
- Charge batteries at least every 6 months or when the voltage is less than 12.8V to maintain optimal performance and lifespan.
Image 2.1: Side view of the battery showing the caution label with important safety warnings.
3. Package Contents
Verify that all items are present in the package:
- 1x Tusk Lithium Pro Battery TLFP-14BR
- M6 Battery Bolts (2x)
- Foam Spacers (various sizes)
Image 3.1: Included M6 battery bolts and washers for secure connection.
Image 3.2: Various foam spacers provided to ensure a snug fit in different battery compartments.
4. Installation
Follow these steps for proper battery installation:
- Verify Compatibility: Ensure the TLFP-14BR battery is compatible with your vehicle. Refer to the fitment guide images below or your vehicle's manual.
- Prepare Battery Compartment: Remove the old battery from your vehicle. Clean the battery compartment and terminals to ensure good electrical contact.
- Position Battery: The Tusk Lithium Pro Battery can be installed in any direction. Place the battery into the compartment.
- Use Foam Spacers: If the battery compartment is larger than the TLFP-14BR, use the provided foam spacers to create a tight, secure fit. This prevents movement and potential damage.
- Connect Terminals: Connect the positive (+) terminal first, then the negative (-) terminal. Use the supplied M6 battery bolts. Note: M5 battery cable eyelets may need to be widened for proper fitment with the M6 bolts. Ensure connections are secure but do not overtighten.
- Secure Battery: Use any existing battery straps or clamps in your vehicle to further secure the battery.
Image 4.1: Part of the fitment guide, showing compatible vehicle models. Consult this guide for your specific vehicle.
Image 4.2: Additional compatible vehicle models listed in the fitment guide.
Image 4.3: Further compatible vehicle models listed in the fitment guide.
5. Operation
The Tusk Lithium Pro Battery is designed for immediate use after proper installation. It features a test button with an LED indicator to display the state of charge.
- Checking State of Charge: Press the "TEST" button located on the battery. The LED indicator will illuminate, showing the current charge level.
- Charging: A lithium-specific charger is recommended for optimal battery health. Ensure your charger is compatible with LiFePO4 batteries and does not have an automatic "desulfation mode" that cannot be disabled.
Image 5.1: Close-up view of the test button and LED state of charge indicator on the battery.
6. Maintenance
Proper maintenance ensures the longevity and performance of your Tusk Lithium Pro Battery:
- Regular Charging: If the vehicle is stored for extended periods, charge the battery at least every 6 months or when the voltage drops below 12.8V.
- Storage Conditions: Store the battery in a cool, dry, and well-ventilated area. Avoid direct sunlight and extreme temperatures.
- Terminal Inspection: Periodically check battery terminals for corrosion and ensure connections remain tight. Clean terminals if necessary.
7. Troubleshooting
If you experience issues with your Tusk Lithium Pro Battery, consider the following:
- No Power/Low Power: Check the battery's state of charge using the test button. If low, charge the battery with a compatible LiFePO4 charger. Ensure all terminal connections are clean and secure.
- Battery Not Charging: Verify that your charger is specifically designed for LiFePO4 batteries and is functioning correctly. Ensure proper connection between the charger and battery.
- Vehicle Not Starting: Confirm the battery is fully charged and properly connected. If the issue persists, consult a qualified mechanic to check the vehicle's electrical system.
For persistent issues or concerns not addressed here, please contact Tusk customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | TLFP-14BR |
| Battery Type | Lithium Iron Phosphate (LiFePO4) |
| Cold Cranking Amps (CCA) | 280 CCA |
| Watt-hours (Wh) | 48 Wh |
| Number of Cells | 4 |
| Resistance | 0.02 Ohms |
| Terminal Type | Button Terminal |
| Product Dimensions | 6.5 x 4 x 7.5 inches |
| Item Weight | 2.48 pounds |
9. Warranty and Support
Warranty: Tusk offers a Limited Two-Year Warranty (pro-rated) on Tusk Lithium batteries for defects in material and/or workmanship. Please retain your proof of purchase for warranty claims.
Customer Support: For technical assistance, warranty inquiries, or further information, please visit the official TUSK website or contact their customer service department. Refer to your purchase documentation for specific contact details.