Introduction
This manual provides essential instructions for the proper installation, operation, and maintenance of your Intex 2.6m x 1.6m Rectangular Pool Cover, Model 28036. This cover is designed to fit Intex rectangular frame pools measuring 2.60m x 1.60m, offering protection from debris and reducing water evaporation. Please read all instructions carefully before use to ensure safe and effective product performance.
Safety Information
WARNING: Keep children and pets away from the pool area when the cover is in use. Ensure the cover is properly secured and drained to prevent accidents. A pool cover is not a substitute for adult supervision. Always supervise children and pets around the pool.
Package Contents
Verify that all components are present before proceeding with installation:
- Intex 2.6m x 1.6m Rectangular Pool Cover (Model 28036E)
- Cable Ties (for securing the cover)
Setup Instructions
Follow these steps to properly install your pool cover:
- Prepare the Pool: Ensure your rectangular frame pool (2.60m x 1.60m) is clean and free of large debris before covering.
- Position the Cover: Carefully unfold the pool cover and place it over the pool, ensuring it is centered. The cover is designed with a 20 cm (8 inch) overhang to fit securely over the pool frame.
- Secure with Cable Ties: Locate the rope ties integrated into the cover's edge. Thread these ties around the pool's frame or support legs and pull them taut. Secure the ties firmly to prevent the cover from being dislodged by wind or other external factors.
Image: The Intex rectangular pool cover properly installed over a pool, showing the overhang.
Image: Close-up of a hand securing the pool cover to the pool frame, demonstrating the securing process.
Image: Detail of the cable ties used to secure the pool cover.
Operating Instructions
The pool cover is designed for simple operation:
- Debris Protection: The cover effectively prevents leaves, insects, and other debris from entering the pool water, keeping it cleaner.
- Water Accumulation: The cover features integrated drainage holes. These holes are designed to prevent excessive water accumulation (e.g., from rain) on top of the cover, which could cause sagging or damage. The water drains directly into the pool.
- Evaporation Reduction: By covering the pool, you can significantly reduce water evaporation, especially during hot or windy conditions.
Image: Detail of the drainage holes on the pool cover, designed to prevent water accumulation.
Maintenance
Proper maintenance extends the life of your pool cover:
- Cleaning: Regularly clean the top surface of the cover to remove accumulated dirt, leaves, and other debris. A soft brush or hose can be used.
- Drying: When not in use for extended periods, ensure the cover is thoroughly cleaned and dried before folding and storing. This prevents mold and mildew growth.
- Storage: Store the dry cover in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
Here are solutions to common issues:
- Water pooling on cover: Ensure the drainage holes are clear of debris. Check that the cover is tautly secured to allow water to drain effectively through the designated holes.
- Cover not fitting securely: Verify that the cover is correctly sized for your 2.60m x 1.60m rectangular pool. Ensure the cable ties are pulled tight and securely fastened around the pool frame.
- Cover damage (tears/rips): Inspect the cover regularly for any signs of wear or damage. Small tears may be repairable with a vinyl repair kit. For significant damage, replacement may be necessary.
Product Specifications
| Feature | Specification |
|---|---|
| Model Number | 28036 |
| Compatible Pool Size | 2.60m x 1.60m Rectangular Frame Pools |
| Overhang | 20 cm (8 inches) |
| Material | Vinyl |
| Color | Blue |
| Special Features | Drainage holes |
| Closure Type | Drawstring (Cable Ties) |
| Item Weight | 1.5 Kilograms |
| Country of Origin | China |
Image: Dimensional diagram illustrating the cover's length (260 cm), width (160 cm), and 20 cm overhang.
Warranty Information
For detailed warranty information regarding your Intex pool cover, please refer to the warranty card included with your purchase or visit the official Intex website. Warranty terms and conditions may vary by region.
Customer Support
If you have any questions, require assistance, or need to report an issue with your Intex pool cover, please contact Intex customer support. Contact details can typically be found on the product packaging or the official Intex website.
