OLIXIS HJ368F Drafting Chair Instruction Manual

Introduction

Thank you for choosing the OLIXIS HJ368F Drafting Chair. This manual provides detailed instructions for the safe assembly, proper operation, and effective maintenance of your new chair. Please read this manual thoroughly before assembly and use to ensure optimal performance and longevity of your product.

Image: The OLIXIS Drafting Chair, a tall office chair designed for standing desks, featuring an adjustable foot ring.

Safety Information

Please observe the following safety guidelines to prevent injury or damage to the product:

• Ensure the chair is used on a hard, stable surface.
• Do not exceed the maximum weight recommendation of 275 pounds.
• Improper use of adjustable mechanisms may result in injury.
• Keep children away from the chair during assembly.
• Periodically check all bolts and screws to ensure they are tightened.

Package Contents

Before beginning assembly, verify that all components are present and undamaged. The package should include:

• Chair Seat
• Chair Backrest
• Armrests (2)
• Gas Lift Cylinder
• Foot Ring
• Star Base
• Casters (5)
• Assembly Hardware (screws, washers, caps)
• Installation Tool (Allen wrench)
• Instruction Manual

Setup and Assembly

Assembly of the OLIXIS Drafting Chair is designed to be straightforward and typically takes less than 20 minutes. Follow the steps below:

1. Attach Casters to Base: Insert each of the five casters into the holes at the end of the star base until they click securely into place.
2. Insert Gas Lift: Place the gas lift cylinder into the center hole of the star base.
3. Attach Foot Ring: Slide the adjustable foot ring over the gas lift cylinder and secure it at your desired height using the knob.
4. Assemble Seat and Backrest: Attach the backrest to the seat using the provided screws and the installation tool. Ensure all screws are tightened firmly.
5. Attach Armrests: Secure the armrests to the seat using the designated screws.
6. Connect Seat to Gas Lift: Carefully place the assembled seat onto the gas lift cylinder, ensuring it is centered and fully seated.

Image: Visual representation of the chair's features: smooth-rolling wheels, high-density cushion, explosion-proof gas lift, and an estimated 20-minute assembly time.

Features

The OLIXIS HJ368F Drafting Chair is designed with several features to enhance comfort and functionality:

• Ergonomic Backrest: Designed to conform to the physiological curve of the human body, providing excellent back support and relieving pressure on the waist. The breathable mesh back keeps you cool.
• High-Density Cushion: The seat is padded with high-quality foam, offering soft and comfortable support for extended periods, reducing pressure on your legs.
• Supportive Armrests: Fixed armrests provide stable support for your arms.
• Durable Base and Casters: A rugged nylon base with 360° swivel pulleys ensures stability and smooth mobility.
• Adjustable Foot Ring: Provides support for your legs, ideal for use with standing or drafting desks.
• Explosion-Proof Gas Lift: Ensures safe and reliable height adjustment.

Image: The ergonomic backrest features breathable mesh to ensure comfort and airflow throughout the day.

Image: Illustration of the chair's lumbar support, designed to mimic the spine's natural shape, and the 360-degree swivel base.

Image: Detail of the chair's high-quality materials, including breathable mesh for the backrest and a high-resilience sponge cushion for the seat.

Operating Instructions

Your OLIXIS Drafting Chair offers several adjustment features to customize your seating experience:

• Seat Height Adjustment: Locate the lever under the right side of the seat. Pull the lever upwards to raise the seat. To lower the seat, pull the lever upwards while seated. The seat height can be adjusted from 23 inches to 28.9 inches.
• Foot Ring Adjustment: The foot ring can be adjusted vertically along the gas lift. Loosen the knob on the foot ring, slide it to your preferred height, and then tighten the knob securely.
• Backrest Tilt: The backrest can be tilted back up to 120 degrees. Rotate the button located under the seat to adjust the tilt angle and lock it in position.
• 360° Swivel: The chair is designed to swivel 360 degrees, providing flexibility and ease of movement.
• Armrests: The armrests provide support and are fixed in position.

Image: Overview of the chair's adjustable features, including height adjustment, 360-degree swivel, and the adjustable foot ring.

Maintenance

To maintain the appearance and functionality of your OLIXIS Drafting Chair, follow these simple maintenance tips:

• Cleaning: Wipe clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Regular Checks: Periodically inspect all screws and bolts to ensure they are tight. Re-tighten if necessary to prevent loosening and ensure stability.
• Caster Care: Keep casters free of hair and debris to ensure smooth rolling.

Troubleshooting

If you encounter any issues with your chair, refer to the following common problems and solutions:

Specifications

Image: Visual summary of key specifications, such as material (mesh cloth, foam, iron, nylon) and seat dimensions.

Image: Detailed product dimensions, including seat height range, backrest height, and seat width/depth.

Warranty and Support

OLIXIS is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, we encourage you to retain your proof of purchase for any warranty claims.

For technical assistance, missing parts, or any questions regarding your OLIXIS Drafting Chair, please contact our professional after-sales service team. Refer to the product packaging or the retailer's website for contact information.

You can also visit the official OLIXIS store for more information and support: OLIXIS Store