NORTH EDGE Automatic Mechanical Watch - Space X Series User Manual

Introduction

Thank you for choosing the NORTH EDGE Automatic Mechanical Watch, Space X Series. This timepiece combines sophisticated automatic movement with a unique skeleton aesthetic, showcasing the intricate mechanics within. Crafted from durable 316L marine-grade stainless steel and featuring a scratch-resistant mineral glass, this watch is designed for both elegance and robustness. This manual provides essential information for the proper setup, operation, maintenance, and care of your new watch.

Front view of the NORTH EDGE Space X Automatic Mechanical Watch, highlighting its skeleton dial and robust casing.

Setup

Your NORTH EDGE Space X watch is an automatic mechanical timepiece, meaning it is powered by the motion of your wrist and does not require a battery.

Initial Winding

Before wearing for the first time, or if the watch has stopped due to lack of motion, it needs to be manually wound.

1. Ensure the crown is in its fully pushed-in position (Position 0).
2. Turn the crown clockwise approximately 30-40 times. This will build up a sufficient power reserve to start the movement.
3. Once the watch starts ticking, it will continue to wind itself through your daily activities.

Setting the Time

To set the correct time:

1. Gently pull the crown out to Position 1 (the outermost position).
2. Turn the crown clockwise or counter-clockwise to adjust the hour and minute hands to the desired time.
3. Once the time is set, push the crown back into Position 0 to engage the movement and start the watch.

Operating the Watch

The NORTH EDGE Space X watch features an automatic mechanical movement, which means it is powered by the natural motion of your arm.

Automatic Winding

When worn regularly (approximately 8-10 hours a day), the watch's rotor will oscillate with your arm movements, winding the mainspring and maintaining the power reserve. The watch has a power reserve of approximately 40 hours when fully wound. If the watch is not worn for an extended period, it may stop and will require manual winding as described in the "Setup" section.

Observing the Movement

The skeleton design of the Space X watch allows you to observe the intricate Seagull automatic caliber. The visible mainspring provides an indication of the remaining power reserve.

The transparent case back reveals the intricate automatic mechanical movement, including the oscillating weight.

Maintenance and Care

Proper care will ensure the longevity and performance of your NORTH EDGE Space X watch.

Cleaning

• Wipe the watch case and crystal regularly with a soft, dry, lint-free cloth.
• For the silicone strap, you can use a mild soap solution and a soft brush, then rinse thoroughly with clean water and dry completely.
• Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the watch's finish or seals.

Water Resistance

The NORTH EDGE Space X watch is water-resistant up to 100 meters (10 ATM). This makes it suitable for swimming, showering, and snorkeling.

• Important: Ensure the crown is fully pushed in before any contact with water.
• Do not operate the crown or pushers while the watch is wet or submerged.
• Avoid exposing the watch to extreme temperature changes (e.g., hot shower immediately followed by cold water), as this can compromise the water resistance seals.

The watch is designed for water resistance up to 100 meters, suitable for various water activities.

Magnetic Fields

Mechanical watches can be affected by strong magnetic fields, which may cause them to run inaccurately or stop. Keep your watch away from strong magnetic sources such as speakers, refrigerators, and certain electronic devices. If your watch becomes magnetized, it may require demagnetization by a professional watchmaker.

Storage

When not wearing your watch for extended periods, store it in a cool, dry place, away from direct sunlight and extreme temperatures. For automatic watches, a watch winder can be used to keep the movement running and maintain lubrication.

Troubleshooting

If you encounter any issues with your NORTH EDGE Space X watch, please refer to the following common problems and solutions:

For issues not listed above or if solutions do not resolve the problem, please contact NORTH EDGE customer support or a certified watch repair center.

Specifications

Detailed technical specifications for the NORTH EDGE Space X Automatic Mechanical Watch:

• Model Number: SPACE-X
• Movement: Customized Seagull Automatic Caliber, 24 Jewels
• Power Reserve: Approximately 40 hours
• Movement Frequency: 21600 times/hour
• Case Material: 316L Marine Grade Stainless Steel
• Crystal: Scratch Resistant Mineral Glass
• Water Resistance: 100 meters (10 ATM)
• Clasp Type: Push Button Deployment Clasp
• Strap Material: Silicone
• Case Dimensions (without crown): 40mm (width)
• Case Thickness: 16.8mm
• Package Dimensions: 3.98 x 3.86 x 3.03 inches
• Item Weight: 9.14 ounces
• Department: Men's
• Date First Available: August 18, 2022

Technical drawing illustrating the key dimensions of the watch case and strap.

Warranty and Support

NORTH EDGE is committed to providing high-quality products.

Return Policy

This product is subject to a 30-day return policy for refund or replacement, as per standard retail terms. Please refer to your purchase platform's specific return guidelines for detailed instructions.

Manufacturer Support

For any inquiries, technical assistance, or warranty claims, please contact the manufacturer, NORTH EDGE.

• Manufacturer: NORTH EDGE
• Online Store: NORTH EDGE Brand Store on Amazon

Please retain your proof of purchase for any warranty or support requests.